Free-Edge and Ply Cracking Effect in Angle-Ply Laminated Composites Subjected to In-Plane Loads

This paper presents a semianalytical method for the prediction of interlaminar stresses and displacements near the free edges and ply cracks in general angle-ply laminates subjected to biaxial extensions and/or in plane shear deformation. The method is based on a state space representation of the three-dimensional equations of elasticity. Numerical solutions are obtained by using layer refinement in the through thickness direction and Fourier series expansion in the other directions. By this approach, an angle-ply laminate may be composed of an arbitrary number of monoclinic layers and each layer may have different material property and thickness. This method guarantees continuous fields of all interlaminar stresses across interfaces between material layers. Numerical results are compared with those obtained from other methods. It is found that the theory provides a satisfactory approximation to the stress singularities near the free edges and ply cracks. Numerical solutions for antisymmetric laminates under extension and general laminates under shearing are new in the literature and can be used as benchmarks for validating new models.     

仿真含裂隙地层地震记录的研究

本文介绍了含裂隙地层二维介质的三分量波动方程和吸收边界条件，叙述了不同裂隙性质地层的仿真单炮记录和横波叠加时间剖面的正演方法，给出了模型及实际的横波叠加剖面仿真实例。     

Elastic properties of polycrystalline gold thin films: Simulation and X-ray diffraction experiments

The elastic behavior of supported gold thin films has been studied using a framework in which the elastic interaction between grains and the actual structure of the film (i.e. preferential grain orientation and grain shape) are taken into account. Experiments were carried out using synchrotron X-ray diffraction combined with in-situ tensile testing and thereafter, no assumptions on the residual stress state and on the stress-free lattice parameter a₀ have to be made. Modeling of grain elastic interactions is based on the extension of Eshelby-Kröner model, which allows for estimating the elastic behavior of polycrystals considering the texture and the shape of the crystallites. Flat-disc shaped grains arrangement is shown to yield the best representation of the elastic behavior of the fiber-textured gold thin films composed of columnar grains. This non-intuitive representation results from free-surface effect.     

Anisotropy of X-ray structural parameters of the three phase model in cellulose I

Anisotropy of X-ray structural parameters of the three phase model proposed by Mitra and Mukherjee (ref.2), has been investigated in the case of cellulose fibres of ramie, hemp and jute. The structural parameters have been determined separately from each of the observable equatorial reflections. It has been found that the parameter degree of crystallinity as defined in the model is in fact anisotropic at least in the samples studied. The parameter degree of paracrystallinity introduced by Mitra and Mukherjee was also found to be anisotropic. Several important correlations between the structural parameters have been drawn. It has been observed, in agreement with the recent findings of Hosemann and Balta Calleja (ref.10) that the greater the paracrystalline distortion, the smaller the ‘paracrystallite size’.     

Temperature Dependence of the Magnetocrystalline Anisotropy in Nd_2Co_(14)B Compound

Easy and hard magnetization curves of Nd_2Co_(14)B compound have been measured withextracting-sample-magnetometer(μ_0H_(max)=6T)at 10～300 K.Magnetic anisotropy constants K_1 and K_2have been determined by fitting the hard magnetization curves,in which only K_1 ,K_2 and misalignment anglehave been taken as fitting parameters.The values of K_1 and K_2 at 4.2 K were derived by extrapolation.Anisotropy coefficients,x_2~° and x_4~°were derived from the anisotropy constants.The anisotropy constant K_2increases rapidly with increasing temperature when TT_(sr).The temperature depen-dence of the magnetic anisotropy coefficient x_2~° was fitted with the formula.The anisotropy coefficients x_2~°can be well described by the tenth-power law from 4.2 K to T_(sr)and by the sixth-power law from T_(sr_ to 300 K.     

Liquid crystal polyarylates containing 2,6-naphthalene dicarbonyl group (I): Effects of kinky monomers on thermal and anisotropic behaviors

A series of copolyarylates primarily based upon 2,6-naphthalene dicarboxylic acid, hydroxybenzoic acid and 4,4-biphenol were prepared by slurry-melt polymerization with Santotherm 66 as a heat exchange medium. The frequently used kinky monomer, resorcinol or isophthalic acid, was introduced into these copolyarylates to modify the chemical strcture. The relationship of the thermal behavior and the crystalline structures for these copolymers was studied by means of DSC and wide angle X-rays diffraction. The amount of mcorporated kinky modifier was found to produce a significant effect on the liquid crystalline phase and the melting temperature of the copolyarylates. All of these liquid crystal polymers exhibited nematic textures; shreaded and/or Schlieren type, depending upon the incorporated kinky monomer. The liquid crystal polymers modified by isophthalic acid (up to 40 mole % of 2,6-naphthalene dicarboxylic acid replaced by isophthalic acid) possessed shreaded texture however high the temperatures of the polymer melts were. The liquid crystal polymers modified by resorcinol (60 to 100 mole % of 4, 4-biphenol replaced by resorcinol), however, would have two types of nematic textures: the shreaded texture occurred when the temperature of the polymer melt was between the melting temperature and the anisotropic transition temperature; the Schlieren texture existed when the temperature of the polymer melt was high above the anisotropic transition temperature. The Schlieren texture formed only when a liquid crystal polymer revealed good flowability and lower rigidity. The polydomain concepts could be utilized to explain the observed textures of these copolyarylates clearly.     

Rolling texture and its effect on tensile property of a near-α titanium alloy Ti60 plate

Rolling texture and its effect on tensile properties of Ti60 alloy plates were investigated in the present study. The plates wereβ-rolled at 1070℃ and(α+β)-rolled at 980℃, using uni-directionally rolling(UDR) and cross-directionally rolling(CDR) processes, respectively.β-rolled plates exhibited weak textures, which were attributed to the dispersive orientations of secondary α during the β→α phase transformation. Strong deformation textures formed in(α+β)-rolled plates as a result of slipping mechanisms: the strong T-type texture in UDR plate was related to {10 1 0}[11 2 0] slipping, while the B-type texture in CDR plate was relevant with {0001}[11 2 0] slip. Strong T-type textures led to anisotropic tensile properties. B-type textures would decrease such an anisotropy. The(α+β)-CDR process was found to be a candidate process for reducing anisotropy of Ti60 alloy plates.     

Spectral element spatial discretization error in solving highly anisotropic heat conduction equation

This paper describes a study of the effects of the overall spatial resolution, polynomial degree and computational grid directionality on the accuracy of numerical solutions of a highly anisotropic thermal diffusion equation using the spectral element spatial discretization method. The high-order spectral element macroscopic modeling code SEL/HiFi has been used to explore the parameter space. It is shown that for a given number of spatial degrees of freedom, increasing polynomial degree while reducing the number of elements results in exponential reduction of the numerical error. The alignment of the grid with the direction of anisotropy is shown to further improve the accuracy of the solution. These effects are qualitatively explained and numerically quantified in 2- and 3-dimensional calculations with straight and curved anisotropy.     

Light scattering from anisotropic, randomly rough, perfectly conducting surfaces

An approach is introduced for performing rigorous numerical simulations of electromagnetic wave scattering from randomly rough, perfectly conducting surfaces. It is based on a surface integral technique, and consists of determining the unknown electric surface current densities from which the electromagnetic field everywhere can be determined. The method is used to study the scattering of a p-polarized beam from an anisotropic Gaussian, randomly rough, perfectly conducting surface. It is demonstrated that the surface anisotropy gives rise to interesting and pronounced signatures in the angular intensity distribution of the scattered light. The origins of these features are discussed.