半固态ZnAl 27合金及其二次加热组织

研究了半固态ZnAl27合金及其二次加热组织。结果表明，半固态ZnAl27合金基本无宏观偏析，其组织为细小均匀的近球形非枝晶，综合力学性能远远高于常规铸造合金；二次加热后，α相进一步球化，边缘变得光滑圆整，可以满足半固态触变成形的需要。     

实炉底节能连续式加热炉

轧钢生产使用实炉底连续式加热炉加热钢坯，炉内双纵滑管用耐热耐高温材料，无水冷，起到节约水、电的作用，达到节能增效的目的。     

氧量分析仪在加热炉上的应用

介绍了仕富梅700B型氧量分析仪在加热炉的成功应用，阐述了设备型号的选择。检测设备的安装位置，环境选择及设备维护均是设备能充分发挥效能的重要环节。     

小方坯连铸机的PLC自动控制

本文对弧型小方坯连铸机工艺与设备进行了分析，介绍了连铸生产的ＰＬＣ控制系统。及其软件设计。     

求解复杂形状旋转体拉延毛坯直径的新方法--计算机作图查询法

提出了基于AutoCAD软件的确定复杂形状旋转体拉延毛坯直径的方法－计算机作图查询法，这种方法操作严谨，结果准确，比原有的3种方法简捷、快速，是一种值得推广的好方法。     

REHEATING TEMPERATURE CONTRAST AND MICROSTRUCTURES OF 7075 Al ALLOY CAST BY LIQUIDUS SEMI-CONTINUOUS CASTING

In this study, reheating of liquidus semi-continuous cast billets of 7075 Al alloy was carried out in a resistance furnace, and the temperature contrast of the outer and the center of the reheated billets was investigated, then the reheating microstructures were investigated. Results show that: the difference of temperature between the outer and center is small and the difference of their microstructures are also small. During reheating at 576℃ the spheroidization of grains is significant after 5min and no rosettes are visible after 20min by optical microscopy. Similar observations were madeon materials reheated at 596℃, but the ripening process is faster. The grains growup to 30-60μm, fine enough for thixoforming.     

Phase Composition of Oxide Scales during Reheating in Hot Rolling of Low Carbon Steel

Low carbon steel was oxidized over the temperature range 1000‐1250°C in O₂‐CO₂‐H₂O‐N₂, O₂‐H₂O‐N₂, and O₂‐CO₂‐N₂ gas mixtures. Oxidation times were 12‐120 min. and the scales were 50‐2000 μm thick. The variations of these parameters were chosen to elucidate the phase composition of oxide scales under conditions similar to those of reheating furnaces in hot strip mills, using either thin slab casting or conventional casting and rolling technology. Two types of scales have been observed which are influenced by the furnace atmosphere, oxidation time, and temperature. The first type is a crystalline scale with an irregular outer surface, composed mostly of wustite (FeO), and a negligible amount of magnetite (Fe₃O₄). The second type is the classical three‐layer scale, composed of wustite (FeO), magnetite (Fe₃O₄), and hematite (Fe₂O₃). In general, the experiments showed that an increase in oxidation time decreased the percentage of wustite while the percentages of magnetite and hematite increased. A rise in oxygen concentration in the gas mixture increased the percentages of magnetite and hematite, confirming earlier experimental findings. In water vapour‐free atmospheres O₂‐CO₂‐N₂, the oxide scales had a low percentage of wustite, and high percentage of magnetite and hematite. Carbon dioxide showed a small influence at 1100°C, and a negligible one at 1250°C.     

柳钢35t转炉方坯连铸机系统优化措施

介绍柳钢35t转炉方坯连铸机系统优化措施，通过优化使生产稳定性提高，铸坯质量得到改善，提高各项经济技术指标。     

钢水化学热法升温技术的研究

依据热力学原理，用计算机计算了某些元素与合金的氧化热效应。综述了各种上化学热法升温技术的应用效果。分析讨论了发热剂的类型，升温速度和热效率问题等。     

圆坯连铸GCr15SiMn的成分偏析和接触疲劳寿命研究

利用金属原位分析技术和钻孔化学分析方法对高淬透性轴承钢GCr15SiMn的Φ450 mm连铸圆坯和Φ130 mm圆钢的C、Si、Mn、Cr元素横截面的分布情况进行分析。采用推力片式接触疲劳试验机进行了材料的接触疲劳寿命测试。结果表明：GCr15SiMn连铸圆坯C元素的偏析倾向较大,易产生中心正偏析,而Cr、Si、Mn元素的偏析倾向较小。通过采取稳定低过热度浇铸、三段强电磁搅拌等措施,铸坯的中心碳偏析得以改善。采用(1240±20)℃×5 h高温扩散、初轧首道次变形量≥90 mm大变形轧制的Φ130 mm圆钢的碳偏析可以得到进一步的改善,试验钢在5.3GPa高应力负载下的接触疲劳额定寿命L₁₀达到3.58×10⁶次,接近电渣重熔钢的水平。