微量Ag对CP276合金性能和组织的影响

研究添加不同含量的Ａｇ对ＣＰ２７６合金的拉伸性能和时效组织的影响。对拉伸强度、延伸率测试及透射电镜观察表明：０．１１ｗｔ％加入可促进Ｔ１相析出，使合金强度值升高；０．３５ｗｔ％Ａｇ的加入可在时效前期生成富Ａｇ、Ｍｇ的稳定的ＧＰ区，从而降低合金中Ｃｕ的固溶度，阻碍Ｔ１相析出，时效后期，ＧＰ区分解，生成大量Ｔ１相，使合金强度值显著升高。     

用Ar气制备C—60的研究

在ｋｒａｔｓｃｈｍｅｒ碳弧法中用Ａｒ代替Ｈｅ制出Ｃ－６０。研究了Ａｒ压力为１．３３－９０．６４ｋＰａ时产的Ｃ－６０碳灰，功率消耗，提取率等的关系，并与用Ｈｅ制Ｃ－６０作了比较。     

Evaluation of high Ni-Cr-Mo alloys for the construction of sulfur dioxide scrubber plants

Corrosion in wet lime/limestone systems used for flue gas desulfurization in thermal power plants is of great concern. The frequent variations in acidity and in chloride and fluoride ion concentrations experienced by such systems pose a serious threat to the materials of construction. Currently used materials mostly type 316L stainless steel often fail to meet their life expectancy. The present study evaluates the performance of advanced Ni- Cr- Mo alloys 59 and C- 276 in a simulated sulfur dioxide scrubber environment. Accelerated tests showed that high Ni- Cr- Mo alloys have little tendency to leach metal ions such as chromium, nickel, and molybdenum at different impressed potentials. Scanning electron microscopy was used to examine the morphology of pitting attack.     

Structural significance of the alkyl substituent at the C-4 of (+)-trans-verbenyl acetate in sex pheromonal activity of the American cockroach

The significance of the alkyl group at the C-4 of (+)-trans-verbenyl acetate, which is the sex pheromone mimic of the American cockroach, was investigated. Seven alcohols possessing an ethyl, propyl, or dimethyl group at this position of the 6,6-dimethylbicyclo[3.1.1]heptane skeleton were synthesized and evaluated by behavioral assay. All of the alcohols were inactive, while three of four acetates of the 2-alcohols induced sexual behavior in male cockroaches at the 0.02 or 0.5 mg dosage level, either of which is many orders of magnitude higher than the threshold level of the natural sex pheromones (10^–8 mg). Among the acetates, the compounds with a methyl group or an -oriented ethyl group at C-4 showed the highest activity. The results are discussed in terms of spatial requirements of the molecules for interactions with the receptor.Studies on the sex pheromone mimic of the American cockroach, (+)-trans-verbenyl acetate. Part VIII. For Part VII, seeComp. Biochem. Physiol.,70A: 229–234 (1981).     

红外/热导法检测C-103中氧氮含量

使用LECO ON736氧氮分析仪,采用红外和热导法,对C-103铌铪合金中氧、氮含量进行检测。通过助熔剂处理、坩埚选择、定量下限、分析功率、试样质量、精密度和加标回收实验,建立了C-103中氧、氮含量的检测方法。该方法氧和氮的RSD分别为3.36%和6.86%,加标回收率分别为95.5%~106.0%和92.5%~107.5%,精密度和加标回收实验结果良好,满足分析需要。     

FEM analysis of vacuum hot bulge forming of Hastelloy C-276 thin-walled cylindrical workpiece

A stress relaxation test has been carried out for Hastelloy C-276 at temperature of 800 ~C and initial stress level of 250 MPa. Based on the experimental stress relaxation curve, the relationship between creep strain rate and stress has been derived. Then, a set of creep constitutive equations has been built and the values of constants arising in the constitutive equations have been determined by fitting the creep strain rate-stress curve. Close agreement between computed results and experimental ones is obtained for stress relaxation data. The creep constitutive equation set has been integrated with the commercial FE （finite element） solver MSC.Marc via the user defined subroutine, CRPLAW, for the vacuum hot bulge forming process modelling of Hastelloy C-276 thin-walled cylindrical workpiece. The temperature field, the radius-direction displacement field and the stress-strain field are calculated and analyzed. Furthermore, the bulging dimension and the final internal diameter of workpiece are predicted and the test results verify the reliability of the finite element method.     

高耐腐蚀耐酸性气体的13%Cr油井用钢管的开发

在钢中复合添加Cu,Ni不会生成铁素体相,却能提高其耐腐蚀性能、复合添加Cu,Ni元素提高钢的耐腐蚀性能的机理,是由于生成的腐蚀皮膜为非结晶体,且在腐蚀皮膜下面形成了Cu的富集层。添加Mo元素,特别是在添加1．5％以上的Mo时,可以提高钢的耐酸性气体腐蚀的特性。在此研究基础上．开发出了低C—13％Cr—Cu—Ni—Mo钢管、该钢管具有良好的耐CO2腐蚀性能、耐酸性气体腐蚀特性以及高的强度和韧性,可在许多情况下替代双相不锈钢。     

不同焊接方法对哈氏合金C-276焊缝组织和耐晶间腐蚀性能的影响

采用ASTM-G28B法进行晶间腐蚀试验,分别研究了手工GTAW和手工GMAW对哈氏合金C-276焊缝组织和耐晶间腐蚀性能的影响。结果表明,手工GMAW焊接的C-276合金,焊缝区析出碳化物第二相较多,晶间腐蚀倾向更大。     

热成形工艺参数对C-276合金耐蚀性的影响

通过分析锻造温度、热处理温度和时间对C-276合金耐蚀性的影响,确定析出相u为其耐蚀性的主要影响因素。基于该分析结果,在避免u相析出的前提下确定C-276合金的热成形工艺参数并进行热成形试验,结果显示该工艺参数可以获得最佳的耐蚀性能。     

Sensitivity of SAR data to post-fire forest regrowth in Mediterranean and boreal forests

Disturbed forests may need decades to reach a mature stage and optically-based vegetation indices are usually poorly suited for monitoring purposes due to the rapid saturation of the signal with increasing canopy cover. Spaceborne synthetic aperture radar (SAR) data provide an alternate monitoring approach since the backscattered microwave energy is sensitive to the vegetation structure. Images from two regions in Spain and Alaska were used to analyze SAR metrics (cross-polarized backscatter and co-polarized interferometric coherence) from regrowing forests previously affected by fire. TerraSAR-X X-band backscatter showed the lowest sensitivity to forest regrowth, with the average backscatter increasing by 1-2 dB between the most recent fire scar and the unburned forest. Increased sensitivity (around 3-4 dB) was observed for C-band Envisat Advanced Synthetic Aperture (ASAR) backscatter. The Advanced Land Observing Satellite (ALOS) Phased Array-type L-band Synthetic Aperture Radar (PALSAR) L-band backscatter presented the highest dynamic range from unburned to recently burned forests (approximately 8 dB). The interferometric coherence showed low sensitivity to forest regrowth at all SAR frequencies. For Mediterranean forests, five phases of forest regrowth were discerned whereas for boreal forest, up to four different regrowth phases could be discerned with L-band SAR data. In comparison, the Normalized Difference Vegetation Index (NDVI) provided reliable differentiation only for the most recent development stages. The results obtained were consistent in both environments.