水锤涌浪联合试验的变态模型相似律

该文详细推导了在同一个物理模型中同时模拟调压室涌浪和压力钢管中的水锤时应满足的变态模型相似律，结果应用于电站模型试验中。     

管道流体瞬态—水汽锤计算原理

文中介绍了核电站管道中流体瞬态——水汽锤的计算原理;既适用于液体介质的水锤计算,也适用于可压汽体的汽锤计算.对于一些典型管道部件的处理方法,文中也作了讨论。     

三峡地下电站变顶高尾水洞水动力特性

在国内首次应用模型水轮发电机组对三峡地下电站变顶高尾水洞方案进行水力过渡过程试验研究。对水轮机导叶实行分段关闭 ,并求出了二段关闭的最佳拐点 ,试验证实了二段关闭对减小尾水管进口的负压和机组转速上升有明显的作用。通过有关水力参数的测试 ,认为变顶高尾水洞可以满足各项技术要求 ,是一个减少山体开挖、节省投资的新型设计方案。在地下电站中具有广泛的应用前景     

Dynamic response and behavior of reinforced concrete slabs under impact loading

Reinforced concrete slabs are among the most common structural elements. In spite of the large number of slabs designed and built, the effect of their details on their behavior under impact loads are not always appreciated or properly taken into account. This experimental study was aimed at understanding the dynamic behavior of structural concrete slabs under impact loading to improve the state of the art of protective design. This study investigated the effects of different types of slab reinforcements and the applied impact loads on the dynamic response and behavior of reinforced concrete slabs.     

工程钻机在沙卵石地区的物探钻井

川西平原属沉积平原，不到2m厚的表土下面全是沙卵石，沙卯石厚度达二、三十米。地面覆盖农田，沟垄纵横，限制了车载钻机的进入。以往地震勘探多采取浅井组合方式激发，所获得的地震资料能量差、面波强，对农田破坏面积大。若使用SH30—2A型轻便工程钻机，配上自制的冲击管，采取冲击钻进，从管中下药柱的方式，可实现沙卵石地区的深井激发，提高资料采集质量，且效率高、成本低。     

反水锤的危害及防止

反水锤是发生在反击式水轮机尾水道中的一种特殊水锤现象，其压力峰值可达正常压力的几倍，甚至十多倍，以致造成肢解转轮、折断导叶、破坏顶盖、抬起转子的严重事故。因此，研究反水锤发生的原因，从而提出防止反水锤事故的措施尤为重要。     

无篦条可逆锤式破碎机

首先介绍了锤式破碎机的现状及发展前景，主要阐述了无篦条可逆锤式破碎机的工作原理，较详细地介绍了本机的结构特点和性能优点。     

光纤数字环路载波系统的发展

ＯＤＬＣ是当今用户接入网的新型设备，它一方面可取代端局，解决通信线路紧张和远距离大容量放号问题，另一方面也可满足日益增多的增值业务的需求。本文ＯＤＬＣ技术的基本原理，结合目前国内外常见ＯＤＬＣ系统，总结和对比了其基本特点，优势，并指明ＯＤＬＣ的技术发展方向和中国应用的前景。     

Gravity pipe flow of polymeric bulk solids in pneumatic conveying system

Various physical parameters of gravity pipes such as gravity pipe diameter, the inclination of the gravity pipe, the cone angle, temperature of the discharged material and the rate of air counter flow into the gravity pipe were studied. The results obtained from the pipe diameter and cone angle experiments showed that the mass flow rate was proportional to (D-1.4d)^2.5 and also to θ^-0.5. The results from the pipe inclination experiment showed the existence of an angle of inclination for maximum flow, which was also reported by Wieghardt [Uber einige versuche an stromungen in sand. Ingenieur Archived 20, 109-115]. The air flow experiment also showed that the mass flow rate was inversely proportional to the air counter-flow rate, and strongly influenced by the material properties. Results from the temperature experiment showed that the temperature of the material had slight effect on the mass flow rate for the temperature range that was used in the experiment. Flow visualization images showed formation of solid plugs in the pipe that played a part in influencing the behaviour and mass flow rate of solids in the system.     

自由锻锤上冷冲厚板新工艺

介绍了自由锻锤上冷冲厚板工艺的特点和模具主要结构。以及如何解决凸凹模间隙、选用小间隙冲孔时刃口磨损加剧的问题。研制出了降低磨损。提高模具寿命的润滑剂配方。设计了适合自由锻锤上厚板冲孔的模具，对在自由锻锤上厚板冲孔进行了有益的尝试。扩大了自由锻设备的加工范围。解决了不具备大型压力机情形下的生产难题。