Shape-Controlled Synthesis and Upconversion Luminescence of Y2O3:Yb, Er Microstructures

The Y2O3: Yb3 , Er3 microstructures were fabricated by a hydrothermal method without surfactants.The microstructures structure was characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM,KYKY 1000B).The up-conversion luminescence spectra were studied under 978 nm laser diode excitation.In Yb3 and Er3 codoped Y2 O3 microcrystals, the relative intensity of green emission became stronger as the morphology of sample changed from wires to films.     

Ce3+离子对掺Er3+碲酸盐玻璃光谱性质的影响

研究了Ce3 + 对掺Er碲酸盐玻璃荧光光谱性质的影响 ,比较了不同的Ce3 + 掺杂浓度下Er3 + 离子荧光发光强度的变化 ,分析了Ce3 + 离子对Er3 + 离子作用的原理 ,应用经典方程计算了Er3 + 离子 4I1 1 / 2 能级的荧光寿命及其变化     

可控合成自组装NaYbF_4:Er的研究

采用水热法制备了Er~(3+)掺杂的NaYbF_4上转换发光材料,X射线衍射结果表明,Er~(3+)掺杂没有改变产物的NaYbF_4晶相,EDS图发现该晶体主要成分是Na、Yb和F,同时还发现了Er,说明晶体中成功掺进了Er元素。SEM分析发现产物为圆盘状结构并且没有严重的团聚现象,晶体尺寸均匀。上转换发光光谱图出现了三个比较明显的发光峰,其发光中心分别位于525nm、540nm和660nm,其中660nm处最强。红光强于绿光主要是因为在高浓度Yb~(3+)的作用下Er~(3+)发生了交叉弛豫。     

二人转所反映的东北地区民间饮食习俗

二人转中所反映的东北地区民间饮食习俗不仅多姿多彩,而且有着鲜明的地域特点和独特的民族风格、历史特征。米、面结合的主食,朴实粗犷、原汁原味的肴馔,别具特色的小吃,彰显东北地域性格的酒饮,这种多元而独特的饮食风格在二人转中得到了充分展现。作为东北地区原生态艺术代表的二人转,广泛而深刻地反映了东北地区的社会生活。     

Multipath optical thermometry realized in CaSc2O4: Yb3+/Er3+ with high sensitivity and superior resolution

Design and fabrication of contactless optical thermometer with rapid and accurate performance has become a research hotspot in recent years. Herein, CaSc₂O₄: Yb³⁺/Er³⁺ is employed as the intermediary for temperature sensing under the excitation of 980 nm, which is proven to afford an ultra-sensitive and high-resolution optical thermometry in multiple ways based on the fluorescence intensity ratio (FIR) technology. The optimal thermal sensing behaviors are realized by the FIR of Er³⁺:²H_11/2 → ⁴I_15/2 to ⁴S_3/2 → ⁴I_15/2 transition, which has a relative sensitivity of 1184/T² and a minimal resolution of 0.03 K along with a maximal absolute error of 0.96 K. Besides that, the FIR between the thermally coupled Stark sublevels of Er³⁺:⁴F_9/2 manifold (FIR_R) as well as that of Er³⁺: ⁴I_13/2 manifold (FIR_N) can also provide excellent optical thermometry. The relative sensitivity of FIR_R-based and FIR_N-based optical thermometers are calculated to be 402/T² and 366/T², respectively, with a same minimal resolution of 0.09 K, which possess the potential to be used for biomedicine due to the inherent advantage of their operating wavelengths located in the biological window. The results demonstrate that CaSc₂O₄: Yb³⁺/Er³⁺ is a promising candidate for temperature sensing with multipath, high sensitivity, and superior resolution.     

微量稀土Er对Al-5Mg合金组织与性能的影响

采用铸锭冶金法,制备含不同量稀土元素Er的Al-5Mg合金。利用拉伸力学性能测试、OM、XRD、SEM、TEM及EDS分析等分析测试手段,研究微量Er对Al-5Mg合金微观组织与力学性能的影响。结果表明:Er可以明显提高Al-5Mg合金的强度,添加0.4%Er(质量分数)的Al-5Mg合金的冷轧态屈服强度(σ0.2)提高了81MPa,而延伸率变化不大;Er的加入还能减少Al-5Mg合金的枝晶偏析,并可显著细化合金的晶粒组织;Er对晶粒的细化机理与其添加量有关,当Er含量较低时,符合传统的稀土细化机理;当Er含量较高时,由于在熔体中形成了初生Al3Er质点,在结晶形核时可以作为非均质形核核心,从而可显著细化晶粒组织;Er对合金的强化效应主要来自于晶粒细化及在晶内形成的细小二次Al3Er质点。根据实验结果可知,添加0.4%Er可使合金具有较为优异的综合性能。     

在工业中采用钛合金的微弧氧化

采用硬度测试，金相显微观察和透射电镜分析等方法，研究了微量稀土Er对高纯铝再结晶行为的影响，结果表明，弥散分布的细小Al3Er质点对位错和亚晶界具有钉扎作用，可以有效抑制再结晶，将高纯铝的再结晶温度提高50左右，同时还能显著细化再结晶晶粒，再结晶形核机制是亚晶聚合和亚昌长大双重机制。     

Effect of trace rare earth element Er on high pure Al

1　INTRODUCTIONAsit swellknown ,Chinaisrichinrareearths ,whoseprovedreservesare 80 %ofthetotalreservesoftheworld ,rankingfirstintheworld .Atpresent,theresearchandapplicationofREinsteel&ironareratherprofoundinChina .ThoughtheapplicationandstudiesaboutREinaluminumanditsalloysbeganearly ,it snotuntillateinthe 1970 sthattheinvesti gationandexploitationbeganonalargescaleandgraduallycametoaclimax[13] .Inthepast ,there searchofREaluminummainlyfocusedontheapplica tionofsomeelementssuchasLa ,…     

EFFECT OF RARE EARTH ELEMENT Er ON STRENGTHENING OF INTERFACE OF Ti（C，N） BASED CERMETS

ＥＦＦＥＣＴＯＦＲＡＲＥＥＡＲＴＨＥＬＥＭＥＮＴＥｒＯＮＳＴＲＥＮＧＴＨＥＮＩＮＧＯＦＩＮＴＥＲＦＡＣＥＯＦＴｉ（Ｃ，Ｎ）ＢＡＳＥＤＣＥＲＭＥＴＳ￥ＬｉｕＮｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｅｒｉｎｇ，...     

Al-20Cu-9.6Si-xEr钎料对SiC_p/A356复合材料真空钎焊接头组织与性能的影响EI北大核心CSCD

采用不同铒含量的7组Al-20Cu-9.6Si-xEr钎料分别对SiCp/A356复合材料进行了真空钎焊。利用扫描电镜和能谱分析等方法对接头微观组织进行了观察和分析。通过剪切实验对钎焊接头的抗剪强度进行了测定,并对剪切断口的微观形貌进行了观察。结果表明：添加稀土后,钎焊接头的抗剪强度明显提高。当w（Er）=0%时,钎缝处SiC颗粒聚集严重,接头强度为43.5MPa;当w（Er）=0.05%时,钎缝边界无SiC颗粒的聚集,接头强度最高,达到68.6MPa;当w（Er）=0.1%-0.4%时,钎缝处SiC颗粒聚集趋势减弱,接头强度值在45.3-50.5MPa之间;当w（Er）=0.5%时,SiC颗粒分布在钎缝内部,接头强度明显提高,达到62.2MPa。