深孔薄壁件挤压模CAD系统

介绍了利用ActiveXAutomation技术，以VB为开发工具，并采用参数化绘图研究开发的深孔薄壁件挤压模CAD系统。     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.     

连续挤压法介绍

连续挤压法的特点是：挤压所需的压力是借助一个回转的摩擦轮来实现的。摩擦轮的轮缘上设有一个凹槽，其断面取决于原坯的断面（线材坯料）。本文将就这种工艺的设备和有关铝材生产阶段中的一些问题作一简介。     

不同模数下圆柱直齿轮成形的数值模拟及分析

论述了在直齿轮分度圆直径为定值时，变形程度与模数的关系。通过对三种不同模数的齿轮在特定的条件下温挤压成形数值模拟，结果及分析表明，随着齿轮模数的增大，变形程度也增大，金属向齿顶及周围流动就相对较多，齿形就容易充满，但齿轮头部内凹与头的齿部凸肚现象就越厉害。     

Effects of annealing at high pressure on structure and mechanical properties of Al87Ni7Gd6 metallic glass

The effects of annealing and annealing with a superimposed pressure of 940 MPa on the primary crystallization behaviour of α-Al and the resulting micro-hardness have been studied for as-quenched Al₈₇Ni₇Gd₆ metallic glass. Isothermal annealing experiments were conducted for 30 min at 188 °C, 191 °C, and 205 °C in silicone oil maintained either at atmospheric pressure (i.e. 0.1 MPa) or at 940 MPa. XRD analyses detected the evolution of structure with annealing at 0.1 MPa, while specimens annealed with 940 MPa pressure exhibited sharper diffraction peaks than those annealed at 0.1 MPa. DSC measurements were conducted on the as-received amorphous ribbons as well as ribbons annealed at different temperatures at either 0.1. MPa or with 940 MPa superimposed pressure. Specimens annealed with 940 MPa pressure exhibited higher onset temperatures (i.e. T_x1) and temperatures for the first exothermic peak (i.e. T_p1) for primary crystallization. TEM measurements revealed an increase in the volume fraction of α-Al with increases in annealing temperature, while micro-hardness measurements revealed an increase in hardness with increasing amounts of α-Al. Specimens annealed with 940 MPa pressure exhibited further increases in both the volume fraction of α-Al and resulting micro-hardness.     

聚碳酸酯的吹塑成型

简介聚碳酸酯吹塑容器的特性与用途,着重分析其吹塑(包括挤出吹塑、共挤吹塑和注射吹塑)成型的机械(螺杆、机筒、型坯机头与吹塑模具)设计要点及工艺条件。     

单螺杆挤出过程的数值模拟

以三段七区物理模型为基础，采用面向对象程序设计语言VisualC ，对整个单螺杆挤出过程进行了数值模拟。所得压力。温度等工艺参数的模拟结果与实验值吻合较好，说明采用数学模型的正确性和数值算法的可行性。     

多孔塑料管材挤出工艺和机头模具

扼要介绍了多孔塑料管材的用途、性能、制造方法、配方、生产工艺和机头模具的设计     

聚合物熔体在圆锥口型的挤出胀大方程

在聚合物熔体入口收敛流变中引入纯拉伸流变概念，应用张量理论进行了定量分析，导出了一个描述圆锥口型的挤出胀大方程。研究表明，入口收敛拉伸流变，是取合物熔体产生了强烈的弹性形变，导致了较大的挤出物胀大比。