HA型粘结剂性能评判的研究

冷固结球团直接还原工艺成功的关键因素之一是成型粘结剂的选用。粘结剂性能评判 ,传统的方法是通过考查球团矿的机械强度来说明粘结剂性能的优劣 ,步骤繁锁。经过试验研究 ,本文提出了用粘度大小来评判粘结剂性能的直接方法并从理论上进行了论证。对于 HA型复合粘结剂 ,在六速旋转粘度计上测量 ,50 g复合粘结剂的粘度若大于或等于 6.5× 1 0 -3 Pa·s,表示粘结剂性能较好 ,能满足铁精矿冷固球团直接还原工艺的要求 ;若小于或等于 3.0× 1 0 -3 Pa· s,则表示该粘结剂性能较差。     

Adsorption of 117mSn(Ⅳ)-EDTMP on hydroxyapatite and collagen

Some organic phosphines labeled with 117mSn(Ⅳ) have been provedpromising for imaging and pain palliation of bone tumor. In this paper, a prelimi-nary investigation on the adsorption characteristics of EDTMP (ethelenediaminete-tramethylene phosphoric acid) labeled with 117mSn(Ⅳ) on HA(hydroxyapatite) andcollagen, and an investigation on the adsorption mechanism of 117mSn(Ⅳ)-EDTMPon HA was presented.``     

全IP网络中的分层移动管理结构

该文首先简要介绍目前IP网上的移动管理方案MobileIP,然后重点分析讨论对MobileIP进行的改进和扩展,最后提出一种基于MobileIP的适于未来全IP网络的分层移动管理结构。     

Comparison of physical characteristics and cell culture test of hydroxyapatite/collagen composite coating on NiTi SMA: electrochemical deposition and chemically biomimetic growth

A hydroxyapatite (HA)/collagen (COL) composite coating on NiTi shape memory alloy (SMA) was prepared by eletrochemical deposition (ELD) in modified simulated body fluid (MSBF). To draw comparisons of physical characteristics and bioactivity of the composite coating, the HA/COL composite coating was also prepared by chemically biomimetic growth (BG) and the ELD coating was re-soaked in MSBF again for further biomimetic growth (called EBG method in this paper). It was indicated that the c-axis of HA crystals was oriented parallel to the longitudinal direction of the COL fibril in BG and EBG coating, which could not found in ELD coating. The EBG method could induce a denser, thicker and better crystallized HA/COL coating. The cell culture test indicated that the BG coating presented better cell biocompatibility.     

The Attenuated Secretion of Hyaluronan by UVA-Exposed Human Fibroblasts Is Associated with Up- and Downregulation of HYBID and HAS2 Expression via Activated and Inactivated Signaling of the p38/ATF2 and JAK2/STAT3 Cascades

Little is known about the effects on hyaluronan (HA) metabolism of UVA radiation. This study demonstrates that the secretion of HA by human dermal fibroblasts (HDFs) is downregulated by UVA, accompanied by the down- and upregulation of mRNA and protein levels of the HA-synthesizing enzyme (HAS2) and the HA-degrading protein, HYaluronan Binding protein Involved in HA Depolymerization(HYBID), respectively. Signaling analysis revealed that the exposure distinctly elicits activation of the p38/MSK1/CREB/c-Fos/AP-1 axis, the JNK/c-Jun axis, and the p38/ATF-2 axis, but downregulates the phosphorylation of NF-kB and JAK/STAT3. A signal inhibition study demonstrated that the inhibition of p38 significantly abrogates the UVA-accentuated mRNA level of HYBID. Furthermore, the inhibition of STAT3 significantly downregulates the level of HAS2 mRNA in non-UVA exposed HDFs. Analysis using siRNAs demonstrated that transfection of ATF-2 siRNA but not c-Fos siRNA abrogates the increased protein level of HYBID in UVA-exposed HDFs. An inhibitor of protein tyrosine phosphatase but not of protein serine/threonine phosphatase restored the diminished phosphorylation level of STAT3 at Tyr 705, accompanied by a significant abolishing effect on the decreased mRNA expression level of HAS2. Silencing with a protein tyrosine phosphatase PTP-Meg2 siRNA revealed that it abrogates the decreased phosphorylation of STAT3 at Tyr 705 in UVA-exposed HDFs. These findings suggest that the UVA-induced decrease in HA secretion by HDFs is attributable to the down- and upregulation of HAS2 and HYBID expression, respectively, changes that are mainly ascribed to the inactivated signaling of the STAT3 axis due to the activated tyrosine protein phosphatase PTP-Meg2 and the activated signaling of the p38/ATF2 axis, respectively.     

The factors of speeds and loads on the tribological properties of PVA‐H/HA composites

Poly (vinyl alcohol) (PVA)/Hydroxy apatite (HA) composite prepared from aqueous solution of the polymer and dimethylsulfoxide (DMSO) by freezing and thawing method are developing to repair or replace articular cartilage. In the present study, the tribological behaviors of this composite were investigated in a three‐factor, three‐level designed experiment using an improved four‐ball tester. Factors include sliding velocity, applied load, and HA content of composite. Friction coefficient of the PVA‐H/HA was found to depend significantly on load and sliding velocity, while HA content had small effects on the friction coefficient of PVA‐HA composite. We also found that wear loss of PVA‐H/HA increased sharply with the increasing loads and HA content of specimen. Increased HA content from 0.5% to 1.5% resulted in an increasing of 355% in wear loss, while increasing sliding velocity slightly decreases wear loss of specimen. We also found some correlation between friction coefficient and wear loss of specimen under the given condition. These results may be useful in the tribological design of PVA‐H/HA composite for both low wear and low friction using as artificial cartilage substitutes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Evaluation of PLGA/chitosan/HA conduits for nerve tissue reconstruction

A micro-envioment for nerve cells and tissue growth were designed and constructed via surface modification of poly(L-lactide-co-glycolide)(PLGA) with chitosan and hydroxyapatite(HA). The poly(L-lactide-co-glycolide)/chitosan/hydroxyapatite (PLGA/chitosan/HA) conduits were manufactured by a combined solvent casting and particulate leaching technique. The conduits were highly porous with an interconnected pore structure and 76.5% porosity. Micropores with 50–100 micrometer diameter were formed in the conduits. In vivo application of PLGA/chitosan/HA conduits for reconstruction of 10 mm sciatic nerve defect was assessed by the walking track analysis, the quantifying of the wet weight of tibialis anterior muscle and the histological assessment. The conduits in host rats in vivo can not only be an effective in promoting regenerating of nerves but can also lead to favorable nerve functional recovery. Funded by the National Natural Science Foundation of China(No.50774096)     

含镁羟基磷灰石、磷酸三钙复合生物陶瓷涂层的研究

通过溶胶凝胶法在钛合金基体上合成了含镁羟基磷灰石/β-磷酸三钙陶瓷复合涂层．研究表明,羟基磷灰石相与β-磷酸三钙相共同存在于600℃烧结的复合涂层中．X射线光电子能谱分析显示,镁离子已合成到涂层之中．在模拟体液中,在复合涂层表面沉积出了较为明显的新生类骨层．使用MG63细胞进行培养试验,结果显示涂层具有良好的细胞亲和性．试验结果表明：含镁羟基磷灰石／β-磷酸三钙复合涂层具有良好的生物活性,有望在医疗实践中作为人工骨质材料得到广泛应用．     

β钛合金微弧氧化膜制备及其在人体模拟液中腐蚀性能研究

采用微弧氧化技术在TiNbZrFe合金表面制备出含钙磷成分的多孔氧化膜,通过人体模拟液浸泡的方法诱导生成羟基磷灰石,并利用电化学阻抗谱（EIS）研究其在人体模拟液中浸泡不同时间后的耐腐蚀性能．结果表明,经400V电压微弧氧化后TiNbZrFe合金表面氧化膜的形貌与成分达到最优化,且明显有α-Ca3（PO4）2 相生成;α-Ca3（PO4）2 相能够起到良好的诱导生成羟基磷灰石（HA）的作用,在人体模拟液中浸泡1d后,通过XRD检测出有HA相生成,导致微弧氧化膜层表面的微孔被诱导生成物覆盖填充明显,较小微孔完全消失;随着浸泡时间的延长,经过微弧氧化膜诱导生成的HA涂层不断增厚,EIS结果表明其具有良好的隔绝渗透作用,能够阻碍腐蚀性介质在溶液和金属界面之间扩散和迁移,从而起到保护基体抗腐蚀的作用．     

等离子体熔融钛与羟基磷灰石混合粉颗粒的形态和相组成

利用等离子喷涂设备将Ti与羟基磷灰石（HA）的混合粉末喷射入水，采用扫描电子显微镜和X射线衍射仪研究了Ti HA入水颗粒的形态和相组成，结果表明，经等离子熔融喷射入水后，钛粒子的尺寸小于HA粒子，主要原因之一是HA内形成了空心结构，空心结构的形成是由于HA在熔融时生成气相P2O5和H2O，它们在颗粒内聚集形成气泡，入水Ti HA粒子主要是由晶相和非晶相HA，分角相磷酸三钙（TCP）和磷酸四钙（TTCP）以及Ti的化合物所组成，由于与Ti的混合，HA的分解加剧，而Ti与HA粒子的融合及元素的扩散在飞行过程中已经发生。