UHE电炉炼钢的冶炼工艺特点及其发展的几个问题

从实践上论述了UHE电弧炉炼钢的工艺特点,提出UHE电炉的“新三期”的新观点,并作了定量的描述;对正在发展中的UHE电炉工艺与设备提出了策略性的意见.     

Peculiarities of erosion-corrosion processes

Investigations have been carried out on an erosion-corrosion apparatus to investigate the behaviour of corrosion-resistant highalloy iron-base materials containing hard phases. These materials had been optimized for increased wear resistance under complex stress conditions. As expected, in dry erosion tests, very low mass losses were established; there was little difference between the materials. Also, in corrosive environments (NaCl, H₂SO₄), the materials showed good stability; however, the duplex structures were superior to the martensitic ones. The combination of erosion and corrosion produced large differences and, in some cases, markedly reduced resistance to damage. These results confirmed observations that it is impossible to deduce the environmentally influenced mechanical behaviour of an alloy from its behaviour in separate corrosion and erosion experiments. The basic mechanisms underlying these processes have been investigated only tentatively.     

Structure modification of rapidly solidified Al-11 wt% Si alloy by the addition of 2 wt% Fe

An investigation of the structure formation of as-cast Al-11 wt% Si (AlSi11) and Al-11 wt% Si-2 wt% Fe (AlSi11Fe2) rapidly solidified (RS) ribbons is performed. Ribbon samples are examined in detail using Auger electron spectroscopy (AES) and transmission electron microscopy (TEM). A nanoscale thickness layer of Si-precipitations, at both Al-grains boundary and oxide/Al-matrix interface, is found to be characteristic for “pure” AlSi11 ribbons. For Fe-doped ribbons, this layer comprises Fe-containing phase also, which appears to possess amorphous nature and is situated between the Si-grains and Al-matrix. A possible mechanism of altering the thermally activated volume diffusion of elements, due to the effect of Fe on the structure modification, is speculated based on the obtained results.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

Microstructural transformations of heat affected zones in duplex steel welded joints

The influence of the welding thermal conditions exemplified by heat input and heat treatment after welding on the structure of the heat affected zone (HAZ) UNS S31803 has been analysed. The post weld treatment was used to create the precisely defined thermal conditions for the decomposition of primary phases in the HAZ, by a multi-layer welding thermal cycle stimulation. Detailed analyses of the microstructure and chemical composition of the phases in the different post welded conditions were performed by scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS) and transmission electron microscopy (TEM). Three types of secondary precipitates have been observed: secondary austenite (γ₂), carbides: M₂₃C₆ and M₇C₃. The dependence of the secondary austenite volume fraction and morphology in the HAZ on thermal cycle have been interpreted. The eutectoid decomposition of the primary phases in the analysed thermal conditions was confirmed.     

The Problem of Estimating the Uncertainty of the Fixed Point Temperature Due to the Presence of Impurities

The main problems in estimating the uncertainty due to the presence of impurities in the material: the absence in the documents of a unique definition of the quantity being measured – the fixed point temperature, the lack of agreed methods of realizing the fixed points and the insufficient justification of the equations used for the estimate, are analyzed. The results of a measurement of the melting point of gallium are presented, which differ in the conditions in which they were realized – with one and two liquid-solid interfaces and different solidification conditions, are presented. The reasons for the considerable difference between the values of the temperatures obtained in these experiments are discussed.     

Al-4%Cu过饱和合金在强磁场中时效行为

采用差示扫描量热仪分析并结合显微硬度测试、电子探针分析、透射电镜观察研究了10-T稳恒强磁场对Al-4％Cu（质量分数）合金130℃时效过程中各沉淀相析出行为的影响。结果表明：在低温时效初期强磁场的引入加速了铜的扩散，降低了G.P.（Ⅰ）区的溶解激活能，促进其溶解，各沉淀相的析出与溶解温度均向低温处移动，时效进程加快；另外，强磁场时效后沉淀相尺寸减小；施加强磁场试样的硬度明显高于未施加磁场试样的，时效硬化效果加强。     

含碳羟磷灰石矿石中磷的物相分析方法

将磷物相分作胶磷矿含磷，含磷白云石，含磷褐铁矿及石英等硅铅酸盐含磷4相，并重点研究了陵磷矿的分相。     

建立加气砼直观数理模型的探索

若视加气砼为细观的“两相”材料,则可建立起其细观几何结构的随机直观数理模型,本文应用随机几何的方法探索了加气砼最佳合理内部细观几何结构模型的建立,及其计算机随机模拟,由细观角度讨论了改善加气砼性能的可能性。     

压缩弧光等离子束熔覆层中晶相与非晶相

用压缩弧光等离子束在 45钢表面熔覆Fe Cr Si B粉末涂层 ,采用能谱、透射电镜、电子探针对熔覆层结构进行分析。结果表明 ,熔覆层中晶相与非晶相并存 ,晶相由A(Me)、F(Me)、Me2 3 C6 等相组成 ,且 [2 11]A∥ [2 11]Me2 3 C6 ,(111) A ∥ (111) Me2 3 C6 ,(0 11) A ∥ (0 11) Me2 3 C6 ,即A与Me2 3 C6 保持共格关系 ,而[111]F∥ [32 1]Me2 3 C6 ,(10 1) F∥ (111) Me2 3 C6 。非晶相中Si、Cr等元素含量较高 ,从动力学和热力学两方面对非晶的形成进行了分析