An experimental study on the pumping performance of molecular drag pumps

The pumping performance of molecular drag pumps (MDP) has been investigated experimentally. The experimented MDPs are a disk-type drag pump (DTDP), helical-type drag pump (HTDP) and compound drag pump (CDP), respectively. In the case of the DTDP, spiral channels of a rotor are cut on both upper surface and lower surface of a rotating disk, and the corresponding stator is a planar disk. In the case of the HTDP, the rotor has six rectangular grooves. The CDP consists with the DTDP, at lower part, and with the HTDP, at upper part. The experiments are performed in the outlet pressure range of 0.2–533 Pa. The inlet pressure and compression ratio are measured under the various conditions of outlet pressure and throughputs, and nitrogen is used for the test gas. At the outlet pressure of 0.2 Pa, the ultimate pressure has been reached to 1.0 × 10⁻² Pa for the HTDP, 1.3 × 10⁻⁴ Pa for the DTDP, and 3.6 × 10⁻⁵ Pa for the CDP. The maximum compression ratio of the CDP is much higher than those of the DTDP or HTDP. Consequently, the ultimate pressure of the CDP is the lowest one.     

Simulation of the VVER-1000 pump start-up experiment of the OECD V1000CT benchmark with CATHARE and TRAC-PF1

In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled three-dimensional (3D) thermal-hydraulics/neutron kinetics benchmark for VVER-1000 was defined. The benchmark consists of calculation of a pump start-up experiment labelled V1000CT-1 (Phase 1), as well as a vessel mixing experiment and main steam line break (MSLB) transient labelled V1000CT-2 (Phase 2), respectively. The reference nuclear plant is Kozloduy-6 in Bulgaria. The overall objective is to assess computer codes used in the analysis of VVER-1000 reactivity transients. A specific objective is to assess the vessel mixing models used in system codes. Plant data are available for code validation consisting of one experiment of pump start-up (V1000CT-1) and one experiment of steam generator isolation (V1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of CATHARE and TRAC-PF1 system code results for V1000CT-1, Exercise 1, which is a full plant point kinetics simulation of a reactor coolant system (RCS) pump start-up experiment. The reference plant data include integral and sector average parameters. The comparison is made from the point of view of vessel mixing and full system simulation. CATHARE used a six-sector multiple 1D vessel thermal-hydraulic model with cross flows and TRAC used a six-sector, 18-channel coarse-mesh 3D vessel model. Good agreement in terms of integral parameters and inter-loop mixing is observed.     

Optimization of downhole pump setting depths in liquid-dominated geothermal systems: A case study on the Balcova-Narlidere field,Turkey

Downhole pumps are being used increasingly more often in low-enthalpy geothermal wells. The depth at which these pumps are installed depends on the physical and chemical characteristics of the geothermal fluid, the production flow rate, and the reservoir pressure and permeability. In this study we have investigated the factors affecting pump setting depths in low-temperature, liquid-dominated geothermal systems and defined the relationship between flow rate and pressure drawdown based on multi-rate test results. The methodology proposed was applied to the Balcova-Narlidere geothermal field, Turkey. It was found that the most important parameters for determining the capacity and setting depth of a downhole pump were flow performance, non-condensable gas concentration, and temperature. The implementation of the methodology is illustrated.     

高压变频器在高炉冲渣水泵上的应用

介绍了HARSVERT—A06／035型高压变频器的性能及其在新4号高炉冲渣水泵上的应用。     

炼油企业泵振动故障诊断

通过现场振动故障诊断案例的分析,找出了炼油企业中泵振动故障的原因主要是泵转子不平衡、小流量、泵转子与壳体不同心、泵轴承故障等。并在停机检修后发现故障产生的原因与诊断的相符,大大降低了故障诊断的难度,快捷、准确地解决问题,为企业效益最大化奠定了基础。     

Experimental results of a solar assisted heat pump rice drying system

In the last rice harvest season, experimental results have been obtained on the efficiency and drying quality of a solar assisted heat pump drying prototype system. The system has been operated as a solar and heat pump system and drying curves for the different options have been obtained. The advantage of the low temperature and better control in the drier shows that the heat pump assisted solar drying system is an excellent alternative to traditional drying systems.     

铁谱分析技术在燃油中非金属杂质监测方面应用的研究

通过对制谱时，谱片上磨屑沉积机理的重新分析，发现非金属磨屑在自身重力的作用下，仍可有规律地沉积在谱片上。据此特点成功地将柴油中的沙砾等杂质有规律地沉积到谱片上，并检测出了某型叉车柴油机喷油泵柱塞断裂的原因。     

Analytical Expression of the Threshold Pump Power of Erbium—doped Fiber Laeers Pumped at 980 nm and 1480nm Wavelengths

The rate equations,which is suiable to erbium-doped fiber lasers pumped at 980 nm and 1480 nm wavelengths respectively,are investigated,and analytical ex-pressions of the threshold pump powers under two pump wavelengths are derived.As a result,some important parmeters can be quantitatively specified.     

车辆TPMS轮速传感器误差消除方法研究

轮胎压力监测系统能够实时地自动监测行驶中汽车的轮胎气压,对于提高行车安全具有重要的意义。基于轮胎压力监测系统硬件平台,阐述了轮速信号的获取,研究了异点剔除方法,提出了基于弹性BP神经网络分析轮速传感器误差的方法,实现了对轮速信号的修正。仿真和实验结果表明,该轮速传感器误差消除方法的精度可达2×10-4rad,能够显著降低传感器误差,提高轮速信号的获取精度。     

基于AE的砂轮智能修整技术研究

本文基于声发射(AE,Acoustic Emission)研究了高精度磨削过程中砂轮的在线智能修整技术。在分析砂轮磨损和修整机理的基础上探讨了声发射技术在砂轮磨损检测中的应用,着重研究了砂轮修整过程中砂轮修整进给量的控制、运动的控制、AE在线智能修整系统的流程和砂轮在线智能补偿的分析。