Monitoring herbaceous fuel moisture content with SPOT VEGETATION time-series for fire risk prediction in savanna ecosystems

This paper evaluated the capacity of SPOT VEGETATION time-series to monitor herbaceous fuel moisture content (FMC) in order to improve fire risk assessment in the savanna ecosystem of Kruger National Park in South Africa. In situ herbaceous FMC data were used to assess the Normalized Difference Vegetation Index (NDVI), Normalized Difference Water Index (NDWI), Vegetation Dryness Index (VDI), Improved VDI (IVDI), and Accumulated Relative NDVI Decrement (ARND) during the dry season. The effect of increasing amounts of dead vegetation on the monitoring capacity of derived indices was studied by sampling mixed live and dead FMC. The IVDI was proposed as an improvement of the VDI to monitor herbaceous FMC during the dry season. The IVDI is derived by replacing NDVI with the integrated Relative Vegetation Index (iRVI), as an approximation of yearly herbaceous biomass, when analyzing the 2-dimensional space with NDWI. It was shown that the iRVI offered more information than the NDVI in combination with NDWI to monitor FMC. The VDI and IVDI exhibited a significant relation to FMC with R² of 0.25 and 0.73, respectively. The NDWI, however, correlated best with FMC (R² = 0.75), while the correlation of ARND and FMC was weaker (R² = 0.60) than that found for NDVI, NDWI, and IVDI. The use of in situ herbaceous FMC consequently indicated that NDWI is appropriate as spatio-temporal information source of herbaceous FMC variation which can be used to optimize fire risk and behavior assessment for fire management in savanna ecosystems.     

特征权重优化高分辨率遥感影像模糊分类研究

在针对SPOT5等高分辨率遥感影像的面向对象模糊分类过程中,一般对影像对象的特征赋予相同的权重。为了体现不同特征对分类作用的差异,本文在分类时根据特征的重要与否,对参与分类的特征赋予不同的权重,提高重要的、区分度好的特征的权重,降低次要特征的权重。以北京市昌平区的SPOT5影像为例,利用多特征模糊分类和经过权重优化的多特征模糊分类进行分类对比实验。实验结果表明,经过特征权重优化的分类与权重相同的分类结果相比,分类总精度由原来的86.3%提高到了92.6%,Kappa系数由原来的0.8096提高到了0.8947。结果表明,经过权重优化的多特征模糊分类有助于提高模糊分类法的分类精度和适用性。     

An agent-based signal processing in-node environment for real-time human activity monitoring based on wireless body sensor networks

Nowadays wireless body sensor networks (WBSNs) have great potential to enable a broad variety of assisted living applications such as human biophysical/biochemical control and activity monitoring for health care, e-fitness, emergency detection, emotional recognition for social networking, security, and highly interactive games. It is therefore important to define design methodologies and programming frameworks which enable rapid prototyping of WBSN applications. Several effective application development frameworks have been already proposed for WBSNs designed for TinyOS-based sensor platforms, e.g. CodeBlue, SPINE, and Titan. In this paper we present an application of MAPS, an agent framework for wireless sensor networks based on the Java-programmable Sun SPOT sensor platform, for the development of a real-time WBSN-based system for human activity monitoring. The agent-oriented programming abstractions provided by MAPS allow effective and rapid prototyping of the sensor-side software. In particular, the architecture of the developed system is a typical star-based WBSN composed of a coordinator node and two sensor nodes located respectively on the waist and the thigh of the monitored assisted living. The coordinator relies on a JADE-based enhancement of the SPINE coordinator and allows configuring sensors, receiving their data, and recognizing pre-defined human activities. On the other hand, each sensor node runs a MAPS-based agent that performs sensing of the 3-axial accelerometer sensor, computation of significant features on the acquired data, feature aggregation and transmission to the coordinator. The experimentation phase of the prototype, which allows evaluating the obtainable monitoring performances and activity recognition accuracy, is described. Moreover, a comparison of the monitoring system based on MAPS, AFME and SPINE in terms of programming effectiveness and system performances is discussed.     

利用SPOT图象阴影提取城市建筑物高度及其分布信息

在分析SPOT卫星图象阴影与建筑物实际高度关系的基础上,阐述了依据图象建筑物来估算城市建筑物高度的原理和方法,进而探讨了以数据融合为手段的,从SPOT全色图象中准确界定阴影范围的方法,并以此为基础,研究出了一种基于图象阴影特征的城市建筑物高分级及其分布信息自生成技术,在以北京市为例的试验中,建筑物高度分级结果的抽样验证准确率达80％以上,显示出卫星遥感在城市应用方面的巨大潜力。     

A land cover classification product over France at 1 km resolution using SPOT4/VEGETATION data

The present study focuses on the development of a new land cover classification product over France at 1 km resolution. It is based on data sets from the Earth observing system SPOT4/VEGETATION. The satellite measurements are aimed at supporting regional efforts to set up global mosaics on new land cover products. They have been acquired in the frame of the Global Land Cover 2000 project. The instrument design relies on advanced technology, which leads to an improved radiometric and geometric resolution data. Such characteristics allow taking full benefit of the daily repetitiveness of the VEGETATION wide field-of-view sensor without the drawback of a variable pixel size on the image edge. Several physical processing steps are successively operated to the images on a per-pixel basis to remove detector blindness, to filter cloud contamination, and finally to correct both atmospheric and surface anisotropy effects. A new thematic map using the K-means clustering method has been built. First, the results of the satellite-based land cover classification has been successfully compared with the Coordination of Information on the Environment (CORINE) database which serves as a reference to appraise the reliability of the study. Then, it has been inter-compared with land cover products derived from MODIS and AVHRR sensors. For this, an aggregative scheme particularly focused on major land units (forest, grassland, cropland) adopted in order to yield a whole mapping at the same geographic projection and space resolution. The discrepancies between maps enhance the quality of the proposed product, thanks to the use of advanced data processing and a more appropriate method.     

Welding behaviour,microstructure and mechanical properties of dissimilar resistance spot welds between galvannealed HSLA350 and DP600 steels

Abstract

Resistance spot welding experiments were conducted on dissimilar material combination of HSLA350/DP600 steels. The welds were characterised using optical and scanning electron microscopy. The fusion zone of the dissimilar material spot weld was predominantly martensitic with some bainite. Mechanical properties were also determined by tensile shear, cross tension and fatigue tests. The performance of dissimilar material spot weld was different from that of the similar ones in each of the HSLA350 and DP600 steels and exhibited different heat affected zone hardness. The DP600 weld properties played a dominating role in the microstructure and tensile properties of the dissimilar material spot welds. However, the fatigue performance of the dissimilar welds was similar to that of the HSLA350 welds. Fatigue tests on the dissimilar material spot welds showed that the 5·5 mm diameter nugget exhibited higher fatigue strength than the 7·5 mm diameter nugget.     

ANGULAR DISTORTION ALLOWABLE VALUE AND ASSESS METHOD OF WELD ON COKE TOWER

A graph as the new engineering method for estimate the safety of bulging deformation of coke tower is proposed. Through stresses analysis of circumferential weld of coke tower and comparing the stresses produced by pressure with heat stress of steady state, residual stress, bending stress produced by both itself weight and wind loads, it showed that the stresses produced by pressure on the angle distortion are the main factor of equivalent stress of the combined stress. After comparing four kinds of stress controlling conditions, the relation to stress with depth of angular distortion, grade of curvature of angular distortion and half of region of angular distortion has been inferred. Graph of deformation allowable value of coke tower for different condition by angular distortion and half of region of angular distortion has been plotted. The five steps for its engineering use have been explained. The lighter the grade of curvature is, the larger of bulge allowance, may be, and the bigger of depth of angular distortion may pose too. For the coke tower with a popular structure of Dg 5 400 mm×28 mm, the result by graph is nearly more than the result of two formulas formed by other research, the error is less than 7.0%. But, the graph can be easily applied to different size of angular distortion.     

Microstructural analysis of stir zone of Al alloy produced by friction stir spot welding

Abstract

Friction stir spot welding (FSSW), which was recently developed as a spot joining technique, has been applied to a lap joint of Al alloy 6061 sheets, 1 mm in thickness, to clarify its microstructural features of the joint. A nugget shaped stir zone having finer grain size was observed around the exit hole of the probe. Crystallographic texture analyses using EBSD method suggested that the material flow occurred along the rotating direction of the FSSW tool in the wide region including the stir zone. In the periphery of the nugget shaped stir zone, which was characterised by finer grain size than the stir zone interior, no inclusions or precipitates were found on the SEM scale. A softened region was formed around the joint centre, which could be explained as resulting from dissolution and/or growth of the strengthening precipitates due to thermal cycle of FSSW.     

沾化电厂1、2号机除氧器环焊缝缺陷分析与处理

<正> 0 概 述 沾化电厂1、2号除氧器环焊缝存在大量宏观裂纹和连续未焊透缺陷,在运行过程中发生多处泄漏现象,被迫降压运行,效率大大     

Unsteady interfacial phenomena during inward weld pool flow with an active surface oxide

Abstract

Particle image velocimetry (PIV) was applied to estimate the velocity field on a weld pool surface with an oxide layer. A positive surface tension gradient drives an inward flow pattern from the boundary to centre of the weld pool, resulting in particles collecting on the centre line of the pool at the surface. Unsteady flow motions were observed by experimental visualisation of the particle flow, and the computed velocity field shows strong unsteady interfacial movement during inward flow. These unsteady flow motions are related to clockwise and counterclockwise vortices on the weld pool surface, which in turn affect both mass flow and energy transport. Both the qualitative flow motion and quantitative flow velocity are described in this work, which contributes to explaining the characteristic unsteady fluid flow in the weld pool, the measurements also provide experimental data for validation of numerical fluid flow models of the weld pool.