WAVE INTERACTION WITH PERFORATED CAISSON BREAKWATERS

The reflection coefficient of perforated caissons and the total horizontal forces acting on them were experimentally and numerically analyzed and discussed when wave propagates normally. To consider the viscosity effect of fluid and nonlinear action of waves on structures, the VOF (Volume Of Fluid) method combined with the k-ε turbulence model was used to simulate the interaction between waves and structures. Governing equations were solved with the finite difference method. Through 2D experimental study in the wave flume, the empirical relationship between the reflection coefficient of perforated caissons and the main affecting factors were obtained from the experimental data using the least square method. Also the correlation between the ratio of the total horizontal force acting on perforated caisson and the force acting on solid caisson and the main affecting factors were regressed from the experimental data.     

油田放射性作业人员外周血淋巴细胞染色体畸变的观察

本文调查了油田212例受γ射线和中子混合辐射照射的作业人员和30例正常人的外周血淋巴细胞染色体畸变。作业人员受γ射线照射的人均年受照剂量为1.28mGy。调查结果表明,放射性测井人员与正常人相比染色体畸变率有显著差异。     

静态水热脱铝处理对HZSM-5分子筛的结构、酸性和催化性能的影响

开发了一种静态水热脱铝的方法。HZSM-5经此法处理后,正戊烷的裂解活性增加,脱氢和芳构化性能加强。可用改变处理温度的方法来控制脱铝的程度。用XRD和吡啶吸附红外技术进行了研究。HZSM-5分子筛催化剂性能的变化用非骨架铝产生的强L酸中心来解释。     

433MHz物联网开发平台的设计与开发

物联网是当前信息领域中研究的热点。本文以CC1110芯片为核心,利用温湿度、烟雾、亮度等传感器结合自主开发的WIA-PA协议栈软件,研制了一种基于433MHz频段的物联网开发平台。利用该平台提供的开发套件,可方便地开发智能家居、环境监测等应用系统。目前,重庆伟岸测器利用本平台已成功开发了无线热能表系统。     

关于Photoshop插件的SAR图像处理探究

SAR图像处理主要包括相干斑抑制、特征提取等,如果在使用Photoshop插件SAR图像处理图片,将主要精力集中于算法的设计和优化方面,可以尽量减少在用户界面、内存管理和基本的图像操作方面的编程,既可以实现多种图像处理,又容易实现功能的充分扩大与填充,从而在最短的时间内做做多的事。     

Modularized design for cooperative control and plug-and-play operation of networked heterogeneous systems

In this paper, a cooperative control analysis and design method is investigated for heterogeneous dynamical systems that may be of arbitrary relative degree or nonminimum-phase or both. To achieve consensus or cooperative stability, a negative value of input-feedforward passivity index is used to accommodate and analyze such systems, and the magnitude of the index value is also used as the impact coefficient to quantify the impacts of heterogeneous dynamics of these systems on their networked operations. Physical-system-level designs are explicitly carried out to make individual linear and nonlinear systems (which are either feedback linearizable or nonminimum phase of certain form) become passivity-short and to embed one pure integrator into their input–output dynamics. The network-level distributed control can simply be chosen without any knowledge of the heterogeneous dynamics but with only information of an upper bound on their impact coefficients. It is shown, using the impact equivalence principle, that these controls separately designed but implemented together always ensure either local or global consensus and that a global non-trivial consensus emerges if and only if the information network has at least one globally reachable node or is varying but cumulatively connected. The proposed methodology of fully modularized designs unravels complexity of analyzing and designing cyber–physical systems and enables their plug-and-play into networked operations.     

A multi-echelon production–inventory system with supply disruption

The article investigates an integrated multi-layer supply chain model consisting of supplier, manufacturer and retailer while supply disruption, machine breakdown, safety stock, maintenance breakdown occur simultaneously. At beginning of the production, manufacturer keeps some raw materials in stock received from second supplier at high price, as safety stock due to supply disruption of first supplier. Corrective maintenance is done immediately to restore its normal stage when machine breakdown occurs. Stock out situations at manufacturer and retailer are considered due to disruption of production for machine breakdown. The integrated expected costs of the chain in centralized (collaborating) and decentralized (Stakelberg approach) system are compared. A numerical example and its sensitivity analysis are provided to test feasibility of the model.     

“讲授法”在职工教育中的运用管窥

讲授法是一种主要的教学方法,其主要任务是教师通过口头语言向学习者传授知识和技能,进行思想政治和学习教育。这种方法在教育职工中得到广泛运用。要运用好这种方法,应认真把握以下四个主要环节:一是抓好教学内容的科学性;二是抓好教学过程的启发性;三是抓好教学语言的艺术性;四是抓好教学组织的和谐性。     

基于树搜索算法的多用户MIMO系统的自由度分配

针对最大化多用户MIMO系统的和速率的问题,提出了将迭代式干扰对齐技术（Iterative Interference Alignment：ⅡA）和系统自由度（DoF）分配策略相结合的一种算法.系统的DoF分配是通过树搜索算法（Tree search）来实现的.理论分析及实验仿真结果表明,该算法获得的系统容量,接近遍历法（exhausting search：EX）的结果,但是在算法复杂性及收敛时间上明显优于遍历法.     

电大尺寸复杂目标散射问题的并行矩量法分析

目前飞机和导弹等电大尺寸复杂目标的电磁散射特性采用高频分析法精度较低,本文研究在PC集群环境下三维导体散射问题矩量法的并行化,并应用于复杂目标的RCS计算。本文使用混合积分方程,再用RWG基函数进行离散,阻抗矩阵元素按行分解,并行共轭梯度法进行求解,通过MPI通信库实现。最后使用基准目标NASA杏仁核验证了该并行计算的准确性。