Synthesis of TiO<Subscript>2</Subscript> Hybrid Molecular Imprinted Polymer for Ethofumesate Linked by Silane Coupling Agent

TiO₂ hybrid molecular imprinted polymer (MIP) for ethofumesate using methacrylic acid (MAA) as the functional monomer and silane coupling agent 3-(trimethoxysilyl) propylmethacrylate (KH570) as organic–inorganic connective bridge was synthesized via photo-excitation method. Hydrogen bond was proved to act between MAA and ethofumesate for pre- and post-polymerization binding properties as testified by UV spectrometric method. KH570 modified TiO₂ nanoparticles were prepared via sonochemical reaction, which can accelerate hydrolysis, increase collision chance for the reactive system and improve the dispersion of the nanoparticles. Scanning electron microscope (SEM), transmission electron microscope (TEM), binding and the adsorption kinetics experiments as well as thermogravimetric analysis (TGA) were employed for characterization. The results indicated that the hybrid MIP revealed a larger surface area and more ordered imprinting cavities with improved thermal stability compared to organic-only MIP. Furthermore, faster adsorption kinetics and enhancive adsorption capacity were achieved, which made it promising in chemical sensor applications.     

A study on UV-curable coatings for HD-DVD: Primer and top coats

This study relates to the development of coatings for optical discs in high-density digital versatile disc systems (HD-DVD or blue lay disk) that use a high numerical aperture of 0.85 at 405 nm wavelength and have a protective top layer over a primer layer for protection against damage and dust. Ultraviolet-curable raw materials of two acrylic monofunctional monomers ( isobornylacrylate, IBA and tetrahydrofurfurylacrylate, THFA) and two kinds of urethaneacrylate oligomers (OUMD and OUME) have been easily mixed with photoinitiators. Curing rate of these materials was characterized by FT-IR. In case of top coats, VTES (vinyltriethoxysilane) and acrylic acid were added to enhance the abrasion resistance. These two kinds of UV-curable resinous materials having no solvent were synthesized and investigated as means for making a blue ray disk having good optical and mechanical properties. In addition, dynamic characteristics including reflectivity, fluctuation of RF signal and noise level were also investigated.     

硅烷交联型复合半导电塑料

对于硅烷交联型复合半导电塑料的研究表明，合理的选择EVA，炭黑，交联剂，引发剂，催化剂的种类和适宜的用量，仅仅是提高接枝和凝胶质量分散的必要条件，体系环境的酸碱度才是可以交联的充分条件，只有在体系的环境呈现出中性或弱的碱性时，硅烷才可能与PE和EVA充分接枝和交联。     

硅烷改性炭黑对胶料性能的影响

通过试验讨论了用ＴＥＳＰＴ改性处理的炭黑在橡胶配方中对胶料性能的影响。试验结果表明，ＴＥＳＰＴ改性后不仅可改善胶料的动态特性，而且有益于橡胶的补强。     

Environmental etch performance, and scratch and mar of automotive clearcoats

Environmental etch damage to automotive coatings, and scratch and mar of these coatings are an important element of customer satisfaction as well as a significant warranty repair consideration for automotive companies. The conditions that result in environmental etch are examined and a laboratory test proposed. Data from this test are compared to automotive hoods exposed in Florida. The performance of various crosslinking chemistries is discussed and the requirements for improved environmental etch are outlined. Scratch and mar performance of these systems is also reviewed. We have found that coatings respond to physical stress by elastic recovery, by plastic flow and by brittle fracture. Classifying types of damage in this way is important for understanding the chemistry needed for improved scratch and mar of coatings.     

气相色谱仪在丙基型硅烷偶联剂催化合成中的应用

通过筛选获得了最佳色谱条件，建立较为可行的丙基型硅烷偶联剂催化合成气相色谱分析方法，为实验室研究合成硅烷偶联剂探索高效催化剂提供了快速的检测方法。     

HT-730改性酚醛-丁腈胶粘剂的研制

对酚醛-丁腈胶粘剂进行改性，添加5．0％的硅烷偶联剂，改善了酚醛-丁腈胶粘剂的工艺性能，提高了粘接强度，特别是降低了酚醛-丁腈胶对环境湿度的敏感性。研制的HT-730胶在环境湿度90％时仍有很高的粘接强度，同时老化性能和适用期并没有受到影响。     

Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

硅烷接枝交联LDPE、LLDPE及其共混物的结构研究

利用红外光谱、凝胶渗透色谱、热延伸试验、差示扫描量热法、扫描电子显微镜等方法研究了低密度聚乙烯（LDPE）、线型低密度聚乙烯（LLDPE）及其共混物的乙烯基硅烷接枝及交联产物的分子结构、熔融行为和形态。结果表明：硅烷接枝后，LDPE、LLDPE的重均摩尔质量小幅增加；硅烷接枝交联能力为：LLDPE〉LDPE／LLDPE共混物〉LDPE；接枝和交联使LDPE、LLDPE及其共混物的结晶度降低，晶粒变得不均匀；硅烷接枝和交联能增加LDPE／LLDPE共混物的相容性；交联结构提高了LDPE、LLDPE及其共混物的抗冲性。     

改性蛋白土填充线型低密度聚乙烯的研究

对超细加工并经硅烷偶联剂处理的蛋白土填充线型低密度聚乙烯进行了研究,结果表明:采用适当的偶联剂及恰当的添加量,改性蛋白土可以降低塑料的成本。