感应电动机转速对定子电流暂态过程的影响

本文运用根轨迹法，分析了感应电动机转速对定子电流暂态过程的影响。并通过对稳态时定子电流在电压阶跃干扰下的暂太响应分析，验证了结论有效性。     

Induction motor fault detection and diagnosis using a current state space pattern recognition

In the last few decades the continuous monitoring of complex dynamic systems has become an increasingly important issue across diverse engineering areas. This paper presents a pattern recognition based system that uses visual-based efficient invariants features for continuous monitoring of induction motors. The procedures presented here are based on the image identification of the 3-D current state space patterns that allow the identification of distinct fault types and, furthermore, their corresponding severity. This automatic fault detection system deals with time-variant electric currents and is based on the identification of three-phase stator currents specified patterns. Several simulation and experimental results are also presented in order to verify the effectiveness of the proposed methodology.     

无刷双馈电机原理及定子结构设计分析

无刷双馈电机是一种新型的感应电机,在风力发电和水利发电中有着广泛的应用前景。该文介绍了无刷双馈电机的结构组成,分析了它的变频调速原理,并对电机定子绕组的极数、型式和节距等定子结构设计的原理和方法进行了详尽地说明和分析,为该型电机的电磁设计和参数优化提供了理论依据。     

基于空间电压矢量调制的永磁同步电机直接转矩控制研究

为了解决永磁同步电机传统直接转矩控制低速时磁链和转矩脉动大的问题,提出了1种用空间矢量调制(SVM)实现减小电压矢量在1个控制周期中的作用时间的直接转矩控制方法;为进一步提高系统性能,对磁链扇区和电压矢量进行了细分。仿真结果表明该方法有效抑制磁链和转矩脉动,具有传统直接转矩控制固有的优良性能,而且具有恒定的开关频率。     

采用GA的永磁同步电机直接转矩调速

永磁同步电机直接转矩控制受定子电阻变化影响,进而影响调速系统的精度。本文采用遗传算法动态调整直接转矩控制的调速系统控制器参数的策略,使控制器参数及转矩给定值随转速的波动而调整,克服电阻变化引起磁链控制器输出不准确,达到稳定输出转速的目的。该策略在定子电阻变化较大情况下,仍具有高控制精度。仿真结果验证了这一遗传算法永磁同步电机直接转矩控制调速系统控制策略的有效性。     

Wear and dynamic properties of piezoelectric ultrasonic motor with frictional materials coated stator

Piezoelectric ultrasonic motors have been studied, developed and utilized by researchers and companies all over the world. Ultrasonic motors (USM) produce rotational motion based on traveling waves made by the resonant vibrations of piezoceramic. These motors have been recently developed and utilized in practical applications. The dynamic properties and life of piezoelectric ultrasonic motors are strongly related to the frictional material Fused on the sliding surface. In this study, effects of frictional material properties on the performances of piezoelectric ultrasonic motors are investigated. It was possible to improve the torque of a traveling wave type ultrasonic motor by stator's coating.     

薄型超声电机两相及单相激励时的工作机理分析与实验研究

该文对环状超声电机定子中的行波的特征进行了分析，探讨了行波状态下电机定子端面质点椭圆运动轨迹与矩形板表面质点椭圆运动轨迹之间的差异。指出了圆环定子内圆周侧面中的部分区域具有对电机转子的推动作用。据此设计了一种可实现电机薄型化的新结构，并制作了样机，完成了电机定子性能测试和电机运行实验。运行实验结果表明，样机运转平稳，具有较大的输出转矩。实验中还发现，电机在只输入单相交变电压时仍能实现正常运转，分析了这一现象产生的机理。依据上述机理。可以设计一种新型驻波超声电机。     

大型发电机主绝缘多因子老化过程中交流电流参量的研究

通过大型发电机定子线棒的联合三因子加速老化试验 ,研究了定子主绝缘的交流电流参量随老化时间的变化规律。试验表明 ,在大型发电机定子线棒多因子老化过程中 ,仅用现有的交流参量表征定子主绝缘的老化状态具有一定的局限性。文中提出高温与室温下绝缘交流电流 电压拟合直线的斜率之差Δk可作为表征绝缘老化状态的新的特征参量 ,并对该特征参量随老化时间的变化规律进行了分析。基于系统理论 ,本文针对交流电流试验建立了试样绝缘的等效系统 ,对该等效系统的频率响应随老化时间的变化规律进行了初步研究。研究表明 ,交流电流奇次谐波响应的含量与电压相应的谐波含量的比率Δ随老化时间的增加而逐渐减小 ,也可以作为表征绝缘老化状态的特征参量     

径向磁力轴承定子结构参数的确定

通过分析径向磁力轴承的结构形式、磁极数以及线圈槽形，针对径向磁力轴承定子的结构设计，在充分考虑材料的电磁性能的基础上，提出了一种结构参数的确定方法，为磁力轴承的优化设计及参数驱动的智能设计提供了参考。     

A new approach for low voltage ride through capability in DFIG based wind farm

Protection against voltage dips is very important for transient stability in a Doubly Fed Induction Generator (DFIG). Conventional crowbar circuits have been used for protection of DFIGs; however, they may be insufficient in some transient situations. Therefore, the Low Voltage Ride Through (LVRT) capability was enhanced by a Demagnetization Current Controller (DCC) for the purpose of transient analysis. In addition, both stator and rotor circuit electromotive forces were modeled in a DFIG. The performances of the DFIG models with and without the DCC were compared. Modeling was carried out in a MATLAB/SIMULINK environment. A comparison of system behaviors was made between three-phase faults with and without a stator–rotor dynamic. Parameters for the DFIG including output voltage, speed, electrical torque variations and d–q axis rotor–stator current variations in addition to a 34.5 kV bus voltage were examined. It was found that in the DFIG model the system became stable in a short time when using the DCC.