Mild microscopic wear in the boundary lubrication regime

The transition from a mild wear situation to a severe (adhesive) wear situation is of great interest to be able to design highly loaded concentrated contacts operating in the boundary lubricated regime. In this article a method is described to estimate this transition, based on a thermal criterion. It is stated that if a certain percentage of the contacting asperities transcends a critical temperature which is determined experimentally the transition from mild to severe wear takes place. The theory presented is validated with a model system and the results from experiments are is good agreement with the simulations.     

Metal dusting of ferritic Fe‐Al‐M‐C (M = Ti,V, Nb,Ta) alloys in CO‐H2‐H2O gas mixtures at 650 °C

Iron aluminides are known for their resistance to high temperature oxidation and sulphidation. Only little information is available about carburisation and metal dusting of Fe‐Al alloys. Metal dusting experiments with Fe‐15Al and Fe‐15Al‐2M‐1C alloys (in at.%) with M = Ti, V, Nb, or Ta were conducted at 650°C in CO‐H₂‐H₂O gas mixtures with the carbon activity a_c = 28. The kinetics of the carbon transfer was measured using thermogravimetric analysis (TGA). It is shown that the mass gain kinetics decreases by adding the alloying elements Nb, Ta, V, or Ti with C. Alloying with titanium and carbon leads to the most significant decreasing effect. The metallographic cross section observation showed a general metal wastage for Fe‐15Al, but local pitting for the Fe‐15Al‐2Nb‐1C and Fe‐15Al‐2Ta‐1C alloys. For the Fe‐15Al‐2V‐1C and Fe‐15Al‐2Ti‐1C alloys no significant attack was observed. Needle‐ or plate‐like Fe₃AlC_x precipitates were detected in the carburised samples. The existence of this ternary carbide with perovskite structure was predicted by thermodynamic calculations using the software Thermo‐Calc. The morphology of graphite on the surface was analysed by scanning electron microscopy (SEM). Mainly fine filaments with iron containing particles were detected. Cementite was detected in the coke layer by X‐ray diffraction analysis (XRD).