改性双马来酰亚胺的研究

本文研究了双马来酰亚胺与烯丙基化合物形成的改性树脂体系的固化和热性能，讨论了单体配比、增韧剂、催化剂对性能的影响。     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

双马来酰亚胺树脂体系的固化反应研究

利用ＤＳＣ及原位ＦＴＩＲ技术研究了双马来酰亚妥树脂体系的固化反应，获得了在固化反应过程中各组分的转化率与时间的关系，结合热分析数据，确立了最佳固化工艺。     

双马来酰亚胺基体树脂的改性研究

本文报道用改性物B改善双马来酰亚胺/二胺预聚物溶解性的实验研究.结果表明,改性后的双马来酰亚胺/二胺基体树脂在低沸点、低毒性溶剂如丙酮中具有良好的溶解性,并且有足够的均相期,为湿法制作预浸料创造了有利条件.同时对树脂的固化反应、耐热稳定性及其复合材料在高温条件下(150℃、200℃)的层间剪切性能进行了研究.     

改性BMI微孔轴承保持器材料研究

采用改性双马来酰亚胺树脂制备微孔轴承保持器材料，探讨了制备工艺和最佳工艺参数，得到性能优良的改性双马来酰亚胺微孔轴在保持器材料。     

双马来酰亚胺/二烯丙基双酚A共聚树脂及其玻璃布层压板的制备和性能

用溶液法合成了双马来酰亚胺(BMI)/二烯丙基双酚A(DABPA)共聚树脂。用FTIR、~1H-NMR等方法表征了树脂的结构。DSC曲线显示该树脂的固化能与熔融法得到的基体树脂有所不同。该树脂固化后有良好的热稳定性。以该树脂为基体制备了玻璃布层压板,测试结果表明层压板具有较好的力学性能和电气性能可以作为耐高温结构材料或电绝缘材料在180～200℃长期使用。     

Surface and Interfacial Studies of Plasma-Modified Composite Surfaces

Model epoxy and bismaleimide compounds in thin film form were used to simulate epoxy and bismaleimide composite surfaces, in order to study compositional changes and interfacial reactions induced by oxygen plasma treatment. X-ray photoelectron spectroscopy (XPS) and infrared reflection-absorption spectroscopy (IR-RAS) were used to probe chemical changes which occurred. XPS and IR-RAS were found to be complementary techniques in determining the nature of functional groups incorporated into surfaces by plasma treatment. IR-RAS analysis of the model surfaces following exposure to a liquid epoxy resin revealed that while adsorption of the liquid epoxy occurred on both plasma-treated and nonplasma-treated surfaces, the oxygen plasma-treated surface alone was capable of initiating ring-opening reactions in the epoxy. However, this effect was not observed unless immediate contact was made between the plasma-treated surface and the liquid epoxy resin, illustrating the short-lived reactivity of the functional groups on the plasma-treated surface.     

Glass‐transition temperature in the curing process of bismaleimide modified with diallylbisphenol A

The T_g‐conversion relationship, during the thermal curing of different stoichiometric formulations of 1,1′‐(methylene‐di‐4,1‐phenylene) bismaleimide (BMI), modified with o,o′‐diallyl bisphenol A (DABA), was investigated. The DiBenedetto equation was used to model this relationship for the formulation of DABA‐1 (BMI : DABA, 1 : 1). Based on this model, the T_g‐conversion relationship of formulation DABA‐0.5 (BMI : DABA, 1 : 0.5) was modeled. The high consistency between the model curve and experimental data showed that the change of T_g, attributed to copolymerization between BMI and DABA in DABA‐0.5, in the low‐conversion regime, was the same as that in DABA‐1. This also verifies that, for the formulation DABA‐0.5, copolymerization and homopolymerization do not overlap with each other. The reactions progressed sequentially and homopolymerization occurred after completion of copolymerization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3244–3247, 2004     

Modeling the curing kinetics for a modified bismaleimide resin using isothermal DSC

The kinetics of curing for a modified bismaleimide (BMI) resin was investigated to ascertain a suitable cure model for the material. The resin system used in this study was composed of 4,4′‐bismaleimidodiphenylmethane (BMIM) and 0,0′‐diallyl bisphenol A (DABPA, DABA). The BMIM was the base monomer and the DABPA was the modified agent. A series of isothermal DSC runs provided information about the kinetics of cure in the temperature range 170–220°C. Regardless of the different temperatures, the shape of the conversion curves was similar, and this modified BMI resin system underwent an nth‐order cure reaction. Kinetic parameters of this BMI resin system, including the reaction model, activation energy, and frequency factor, were calculated. From the experimental data, it was found that the cure kinetics of this resin system can be characterized by a first‐order kinetic model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3338–3342, 2004     

Studies on mechanical,thermal, and morphology of diglycidylether‐terminated polydimethylsiloxane‐modified epoxy–bismaleimide matrices

An epoxy matrix system modified by diglycidylether‐terminated polydimethylsiloxane (DGETPDMS) and bismaleimide (BMI) was developed. Epoxy systems modified with 4, 8, and 12% (by wt) of DGETPDMS were made using epoxy resin and DGETPDMS, with diaminodiphenylmethane as the curing agent. The DGETPDMS‐toughened epoxy systems were further modified with 4, 8, and 12% (by wt) of BMI, namely (N,N′‐bismaleimido‐4,4′‐diphenylmethane). DGETPDMS/BMI/epoxy matrices were characterized using differential scanning calorimetry, thermogravimetric analysis, and heat deflection temperature analysis. The matrices, in the form of castings, were characterized for their mechanical properties, viz. tensile strength, flexural strength, and impact test, as per ASTM methods. Mechanical studies indicate that the introduction of DGETPDMS into epoxy resin improves the impact strength, with reduction in tensile strength, flexural strength, and glass transition temperature, whereas the incorporation of BMI into epoxy resin enhances the mechanical and thermal properties according to its percentage content. However, the introduction of both DGETPDMS and BMI enhances the values of thermomechanical properties according to their percentage content. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 668–674, 2006