烟道流量计量标准装置

为了解决我国烟道流量计的量值溯源问题,中国计量科学研究院建立了烟道流量计量标准装置。装置使用可溯源至标准转盘的激光多普勒测速仪作为原级标准器,采用激光多普勒流速剖面扫描和超声流量计波动修正的方式测量标准流量,经校准的8声道超声流量计为工作级标准表,具备了908~104840m3/h的测量能力,扩展不确定度为0.62%(k=2),可对最大口径为1m的流量计进行校准。装置下游测试段包括圆形管段和矩形管段,能够开展烟道流量计测量性能的研究。     

移动卫星通信信道多普勒频移特性研究

在分析移动卫星通信信道特性的基础上，研究增加直射分量的多普勒实时频移和多径信号入射角范围及其变化对移动卫星通信信道多普勒频移特性的影响，推导了其不对称多普勒功率谱形式，对其进行了理论分析并给出了仿真结果。     

一种新的基于快速功控的多普勒估计

针对采用快速功控的移动通信系统提出了一种简便的多普勒估计方法。该方法利用功控后的接收信号电平的平稳性与最大多普勒频移有密切关系这一特点，通过测量接收信号电平的平稳性估计多普勒频移。文中在单径瑞利衰落信道条件下对这一方法进行了仿真验证，并同文献中提出的COV方法进行了比较，仿真结果表明在信道变化不是太快时本方案有较好的估计精度。     

考虑变质量湍流影响的水平井流入动态分析

在水平井生产过程中,井筒内管流与地层渗流互相制约、互相影响、互为边界条件,从而构成了一个完整的水动力学体系。根据水平井生产时井筒内管流与油藏的相互作用关系,建立了水平井筒存在压力梯度的变质量湍流与地层渗流的耦合计算新方法。关于井筒内流的计算;应用了经典的k_εM湍流模型,关于地层的渗流计算,采用了有限元法。通过耦合模拟获得了井筒内湍流场流速分布及总压能损耗的规律,根据耦合模拟计算结果绘出了较为准确的水平井流入动态曲线。该计算方法为描述水平井流入动态、评价水平井产能、确定合理生产制度提供了可靠的手段.     

3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

光敏丝室探测器PET的触发判选处理器

介绍了为光敏丝室探测器PET而设计的触发判选处理器（TRIG）的结构和原理，该处理器具有触发判选，计数率损失测量，随机符合事例率测量，探测器分区计数统计以及系统定标等多项功能，由于应用了EPLD技术和流水线作业等技术，实现了TRIG系统的高集成度和高性能 。     

血液流速测量中血红细胞的多普勒信号

采用双光束干涉条纹模型，用光散射理论得出了激光多普勒测速中大型散射粒子的多普勒信号幅值的表达式：用数值解法求得多普勒信号幅值随散射粒子半径变化的曲线。红血球直径即使比干涉条纹宽度大10倍，也会有良好的多普勒信号。给出了实测的血流多普勒信号。     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

多时滞Lotka-Volterra互惠系统周期正解的存在性

用重合度理论研究具时滞非自治Lotka-Volterra互惠系统，获得了周期正解的存在性，推广了Gopalsamy及He(1997)的结果。     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.