Ageing workforce management in manufacturing systems: state of the art and future research agenda

The workforce ageing phenomenon is recently affecting most of the Organisation for Economic Co-operation and Development (OECD) member countries, due to a general ageing of their populations and a higher average retirement age of the workforce. In this paper, the topic of ageing workforce management is addressed from a production research standpoint, with the aim of understanding how older workers can be supported and involved in a manufacturing system. First, the current state of the art related to the ageing workforce in production systems is presented. This is structured according to four main topics: (1) analysis and evaluation of ageing workers’ functional capacities, (2) consideration of ageing workers’ capacities in industrial system modelling and management, (3) analysis and exploitation of ageing workers’ expertise, (4) acknowledgement, analysis, design and integration of supporting technologies. Next, the discussion on the impact of the ageing workforce on manufacturing systems’ performances leads to the comparison of some technological advances that are related to the Industry 4.0 paradigms. Finally, a future research agenda on this topic is proposed, based on the same topics classification proposed for the literature analysis. Five different research areas are derived, suggesting future directions for appropriate research concerning the employ of older workers in production environments.     

Data sharing mechanism of various mineral resources based on blockchain

Basins with various mineral resources coexisting and enriching often occupy an important strategic position. The exploration of various mineral resources is repetitive at present due to unshared data and imperfect management mechanism. This situation greatly increases the cost of energy exploitation in the country. Traditional data-sharing mode has several disadvantages, such as high cost, difficulty in confirming the right of data, and lack of incentive mechanism, which make achieving real data sharing difficult. In this paper, we propose a data-sharing mechanism based on blockchain and provide implementation suggestions and technical key points. Compared with traditional data-sharing methods, the proposed data-sharing mechanism can realize data sharing, ensure data quality, and protect intellectual property. Moreover, key points in the construction are stated in the case study section to verify the feasibility of the data-sharing system based on blockchain proposed in this paper.     

一种军棋机器博弈的多棋子协同博弈方法

针对在军棋博弈不完全信息对弈中，面对棋子不同价值、不同位置、不同搭配所产生的不同棋力，传统的单子意图搜索算法，不能满足棋子之间的协同性与沟通性，同时也缺乏对敌方的引诱与欺骗等高级对抗能力。本文提出一种结合UCT搜索策略的高价值棋子博弈方法，实现高价值棋子协同博弈的策略。实战经验表明:高价值多棋子军棋协同博弈策略优于单棋子军棋博弈策略。     

An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement

The work describes various physical and chemical treatments to eliminate the deleterious effects of impurities in phosphogypsum on the delayed setting time and impaired strength development behaviour of cement to which it was added as a set regulator. The physical treatments included washing, milling, and ultrasonic treatment of the material, while the chemical treatments dealt with acidic and basic additions to the phosphogypsum during the washing stage. It was found that chemical treatment with a milk of lime solution, which is often recommended in literature, was ineffective in reducing set retardation. Treatment with ammonium hydroxide or sulphuric acid was more effective in this regard. Intergrinding phosphogypsum with slaked lime improved its effectiveness in reducing set retardation, but the use of unslaked lime was less effective and also resulted in marked reductions in compressive strengths. A combined treatment of wet milling phosphogypsum with a lime slurry in a ball mall was derived from these experiments and is recommended for full-scale plant applications.     

NaY晶化母液制备硅铝胶的技术探讨

在导向剂法合成Y型分子筛的工艺下，晶化母液中SiO₂的含量为50～55g/l,Na₂O含量为20～25g/l，相当于模数为1.65～2.58的稀水玻璃，将晶化母液分离处理后，在晶化母液中加入一定量的硫酸铝溶液使硅沉淀,经过滤和水洗后即可制备出合格的硅铝胶，以便进行重新利用。     

PTC热敏电阻的现状与发展趋势(续一)

基于对1995年以来,国内外PTC热敏电阻的研究,介绍了PTC热敏电阻用原料(BaCO3、TiO2、BaTiO3、SrCO3、PbO、Pb3O4、SrTiO3、PbTiO3、Y2O3、Nb2O5、CaCO3、SiO2等);材料(BaTiO3系、V2O3系及高分子);生产技术(瓷粉制造、烧成、芯片制造、质量评定、理化分析、片式PTC生产);重点产品(消磁、马达启动、限流及加热等用)以及基础研究(相变应力模型、表面势垒模型)等方面的现状及今后的发展趋势。     

Method to Characterize the Air Flow and Water Removal Characteristics During Vacuum Dewatering. Part II—Analysis and Characterization

This is part II of a study reported earlier on a method to characterize the air flow and water removal characteristics during vacuum dewatering. This article presents experimental data and analysis of results from the use of a cyclically actuated vacuum dewatering device for removing moisture from wetted porous materials such as paper with the intermittent application of vacuum and accompanying air flow though the material. Results presented include sheet moisture content as a function of residence time and hence water removal rate under a variety of process conditions. Also, experimental results on air flow through the wet porous structure and hence the role and importance of air flow during vacuum dewatering are presented. Vacuum dewatering process conditions include exit solids content between 11 and 20% solid under applied vacuum conditions of 13.5 to 67.7 kPa (4 to 20 in. Hg). Regression analysis indicated that the exit sheet moisture content exhibited a nonlinear relationship with residence time with exit solids reaching a plateau after a certain residence time. Final moisture content correlated linearly with the average overall flow rate of air through the paper sample and the basis weight of the material.     

我国先进制造技术的现状和发展途径

介绍了现在制造业中面临的问题，通过对问题的分析，提出了发展先进制造前沿技术的见解和在我国发展先进制造技术的途径，同时展望了先进制造技术的发展前景。     

A model for preventive maintenance operations and forecasting

Equipment costs constitute the greatest majority of overall costs for semiconductor manufacturing. Therefore, maintaining high equipment availability has been regarded as one of the major goals in the industry. The ability to forecast correctly equipment preventive maintenance (PM) timing requirements not only can help optimizing equipment uptime but also minimizing negative impacts on manufacturing production efficiency. This research used grey theory and evaluation diagnosis to construct a PM forecasting model for prediction of PM timing of various machines. The results showed significant improvements of PM timing predictions compared to the existing method based on experience and an alternative method proposed by Li and Chang (Semiconductor Manufacturing Technology Workshop 2002: 10–11, pp. 275–277) for the same fab cases. Received: June 2005 / Accepted: December 2005     

Changing our view on design evaluation meetings methodology: a study of software technical review meetings

By contrast to design meetings, design evaluation meetings (DEMs) have generally been considered as situations in which, according to DEM methodologies, design activities are quite marginal. In a study of DEMs in software development, i.e. in technical review meetings following a particular review methodology, we showed: (i) the occurrence of design activities as part of an argumentation process; (ii) the relative importance of cognitive synchronisation as a prerequisite for evaluation; (iii) the important role played in evaluation by argumentation that makes explicit the underlying design rationale (DR). On the basis of our results, we discuss the potential for using DR methodologies in this kind of meetings.