热作模具钢表面激光堆焊耐磨合金层的研究

本文主要通过在H13钢上用大功率CO_2激光束进行堆焊,阐述了激光堆焊工艺变化对堆焊组织和性能的影响,在本试验条件下,得到了高密度弥散金属化合物组织的激光堆焊层,平均硬度为HV800,与基体呈冶金结合,耐磨性比H13模具钢提高149%。     

新世纪我国压铸业与国际接轨的思考

针对中国压铸行业的现状和存在的问题 ,以及当前的机遇和面临的挑战 ,论述了中国压铸工业进入 2 1世纪所面临的新形势及应采取的对策     

Effects of solidification structure on fatigue crack initiation and fatigue strength in Al−Si−Mg cast alloys

Rotating-bending uniaxial fatigue tests and micro-fatigue crack initiation tests were carried out using a permanent mold cast (PMC) and semi-solid die cast (SDC) with Al−7%Si−0.35%Mg composition in order to examine the relationship between solidification structures and fatigue behaviors. The crack length was measured using a replication method. Fatigue strength was improved in SDC, which was almost consistent with the predicted fatigue strength using the size of Si particle cluster. Resistance to fatigue crack initiation and fatigue strength were improved in SDC owing to the finer Si cluster and to higher ultimate tensile strength. Fatigue crack in PMC was preferentially initiated at pores. For SDC, the fatigue crack was initiated at the Si particle/matrix interface, and then sucessively grew along eutectic cell boundaries.     

滑移线场近似作图法的原理

给出了滑移线场近似作图法的原理、证明以及近似滑移线场的特点，为进一步利用计算机求解应力分布和变形规律，尤其是为近似滑移线的计算机绘制奠定了基础．     

虚拟企业图纸数据传输

图纸数据是企业间合作需交换的一种重要的信息。本文分析了虚拟企业环境下企业之间交换图纸数据的要求，提出了一种具体的解决方案，并给出实例。     

Failure analysis of a hot extrusion die used for Al-Li alloy processing

Al-Li alloys being developed as lighter, substitutes for conventional high strength Al alloys are to be processed by routine methods. During extrusion of a 8090 Al-Li alloy, the extrusion die container failed causing some alarm. This failed die container was analysed to examine if the failure was caused by interaction of Li diffusing out of Al-Li alloy with the carbides of die steel. The evidence, although not conclusive, is sufficient to exercise caution during such processing.     

Width-restricted layering of acyclic digraphs with consideration of dummy nodes

This paper deals with the problem of finding graph layerings restricted to a given maximal width. However, other than previous approaches for width-restricted layering, we take into account the space for dummy nodes, which are introduced by edges crossing a layer. The main result is that the problem of finding a width-restricted layering under consideration of dummy nodes is NP-complete even when all regular nodes have the same constant width and all dummy nodes have the same constant width.     

针刺合成革基布质量的探讨

分析了针刺合成革基布质量的控制要素 ,以及预针刺机的牵伸比和针刺机的步进图对基布质量的影响     

建筑制图标准中图形符号适宜性、区分性的研究

应用线段长短、间距大小视觉反应的量化规律，提出设计图形符号大小的原则——既更使其大小满足“长”“短”“大”“小”的心理要求，又要互相之间在大小上有区分性。根据图形组织的相似、接近、连续三原则提出设计图形符号形状的原则——图形符号之间尽量减少相似、接近、连续，以保证较好的区分性。通过分析发现，现行建筑制图标准中的图形符号绝大部分在大小和形状具有适宜性、区分性。