三维施工中SN388炮点表的设置

本文提供了SN388在三维施工中炮点表的几种设置方法，并进行了相应的对比说明，最后给出了改进炮点表设置的有关设想。     

曲轴激光喷丸强化试验研究

采用实验的方法,研究了激光冲击强化对175A型柴油机曲轴疲劳寿命的影响,取得了激光冲击强化试验条件下曲轴过渡圆角处残余应力场的数据。并将激光冲击强化工艺效果和曲轴滚压强化效果做了对比性分析,结果表明：虽然激光冲击强化效果不如曲轴滚压强化,但考虑到激光工艺参数精确可控、加工质量好、成本低以及可避免滚压强化所造成的表面疲劳、撕痕等,激光冲击强化工艺可望代替滚压强化成为新型的曲轴强化手段。通过此类激光冲击强化强化实验可优化激光冲击的相关参数,使曲轴过渡圆角产生有利的残余应力场。     

深孔松动爆破提高瓦斯抽放率的应用研究

本文探讨了深孔松动爆破孔和瓦斯抽放孔的布置参数及工艺等 ,并设计了实施方案。在潘一矿的应用试验表明 ,用深孔松动爆破技术来提高低透气性煤层的瓦斯抽放效果 ,是一条很好的途径。     

Disinfection of wastewaters: high-energy electron vs gamma irradiation

A study was undertaken to examine the sensitivity of a wastewater population of coliphage, total coliforms and total flora present in raw sewage and secondary effluent after irradiating with similar doses delivered by a high-energy electron beam and y -radiation. The electron beam study was conducted on a large scale at the Virginia Key Wastewater Treatment Plant, Miami, Fla. The facility is equipped with a 1.5 MeV, 50 mA electron accelerator, with a wastewater flow rate of 8 ls⁻¹. Concurrent y-radiation studies were conducted at laboratory scale using a 5000 Ci, ⁶⁰Co y -source. Three logs reduction of all three test organisms were observed at an electron beam dose of 500 krads, while at least four logs reduction were observed at the same dose utilizing the y-source.     

弹簧表层优化喷丸残余应力场的工程计算方法

以往多是依靠疲劳试验或经验来选择弹簧的喷丸强化工艺参数，这种传统作法不仅人力和物力耗费大，而且所确定的工艺参数也不一定具有最佳的强化效果。依据作者提出的并已获得试验验证的“内部疲劳极限理论”，提出一种通过工程计算获得达到预先规定疲劳强度应具备的“优化残余应力场”。这样便有可能把喷丸强化工艺技术在制造业中的应用由以往单纯依靠试验和经验而步入到以工程计算为基础与少量典型试验相结合的更科学的途径。     

高能喷丸过程中的物质转移现象

采用高能喷丸技术在铝合金表面制备出纳米晶结构层，利用金相显微镜（OM），扫描电子显微镜（SEM／EDS），透射电子显微镜（TEM）及X射线衍射仪（XRD）等设备对高能喷丸铝合金表面层的显微结构及成分进行分析。结果表明：在高能喷丸表面纳米化过程中，弹丸中的Fe，cr原子在强制机械力的作用下转移进入铝合金表面，在材料表层约30μm的深度范围内形成分布不均匀的合金化层。这可能是纳米晶体中大量界面的形成使合金元素原子能够快速扩散和偏聚的结果。     

Evaluation of Surface Residual Stresses in Friction Stir Welds Due to Laser and Shot Peening

The effects of laser, and shot peening on the residual stresses in friction stir welds (FSW) has been investigated. The surface residual stresses were measured at five different locations across the weld in order to produce an adequate residual stress profile. The residual stresses before and after sectioning the coupon from the welded plate were also measured, and the effect of coupon size on the residual stress relaxation was determined and characterized. Measurements indicate that residual stresses were not uniform along the welded plate, and large variation in stress magnitude could be exhibited at various locations along the FSW plate. Sectioning resulted in significant residual stress relaxation in the longitudinal direction attributed to the large change in dimensions in this direction. Overall, laser and shot peening resulted in a significant reduction in tensile residual stresses at the surface of the specimens.     

21世纪国外固体推进剂的研究与发展趋势

从5个主要发展方向分别评述了21世纪固体推进剂研究发展趋势,认为固体推进剂的发展趋势是朝着高能量、低特征信号、钝感、“洁净”和低毒或无毒的方向发展。     

Preparation and characterization of stainless steel/TiC nanocomposite particles by ball-milling method

A stainless steel/10wt%TiC nanocomposite particles were prepared by high-energy ball-milling method using stainless steel, carbon and titanium as raw materials. The evolution of phase composition, microstructure and specific surface area of the stainless steel/TiC nanocomposite particles with increasing ball-milling time in the range of 0–100 h were investigated by XRD, SEM, TEM and BET techniques. The results showed that the stainless steel/TiC nanocomposite particles were fabricated when the ball-milling time was longer than 20 h. However, the nanocomposite particles were soldered and agglomerated again when the ball-milling time was longer than 60 h. The microstructure of the composite particles transformed from lamellar structure to nanostructure during the repeated process of the cold welding and cracking. TEM image reveals clearly that the in-situ TiC nanoparticles with grain size of 3–8 nm are in the interior of the stainless steel/TiC nanocomposite particles obtained by ball-milling 100 h. Funded by the Natural Science Foundation of Hubei Province (No. 2006ABA304)     

高能喷丸表面纳米化对工业纯钛组织性能的影响

用高能振动喷丸法对工业纯钛进行了表面纳米化的研究。用X 射线衍射、光镜和透射电镜对表层变形层金相组织、晶粒尺寸、显微硬度进行分析。结果表明 ,具有密排六方晶体结构的工业纯钛经高能喷丸处理后 ,在表面可以形成具有一定厚度的纳米晶粒组织 ;随着高能喷丸时间的增加 ,表面层的晶粒尺寸变小 ,而表面硬度提高。