环境敏感因素对电站正常蓄水位选择的影响

卜寺沟水电站预可阶段正常蓄水位是考虑规划成果、地形、地质务件、梯级衔接、水库淹没、筑坝技术、水能资源利用等因素综合初选的.从理论角度分析,水库淹没时水库内寺庙的影响,按全部淹没进行经济补偿处理代价较小;其社会环境敏感因素对正常蓄水位的选择不应起决定性作用.但是,考虑到少数民族群众、僧侣和地方政府的要求,适当降低正常蓄水位,以减少对扎西日岗寺庙的影响,将带来较积极的社会影响.     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Three dimensional boundary element analysis of internal cracks under sliding contact load with a spherical indenter

Using boundary element based three dimensional modelling for linear fracture mechanics, we present an analysis of cracking in a homogeneous medium subject to contact load. The proposed iterative solution procedure allows a simultaneous treatment of a reasonable number of partially closed cracks. It is shown that the most probable direction of propagation of a vertical internal crack is strongly dependent on its size compared to the contact radius and its location with respect to the axis of maximum normal load.     

Results of the ASTM field test of tristimulus weighting functions

In 1993, the American Society for Testing and Materials carried out a field test of newly calculated tristimulus weighting factors. These weighting factors had been calculated by a method proposed by Venable. the test also included a method of correction for bandpass dependence put forth by Stearns. the purpose of the trial was to assess the possible reduction in bandpass dependence introduced by each of these sets of weights. A large number of sets of spectral data were gathered from the cooperators in the field test. Results of integration by the various sets of tristimulus weighting factors were calculated. A total of 15 120 color differences were calculated and statistics were derived to test the probable error resulting from each method of correction. Errors attributable to bandpass dependence were on the order of a few tenths to as much as one CIELAB unit when uncorrected weight sets were used. These errors could be reduced to a few hundreths of a CIELAB unit, and in some cases to a few thousandths of a unit, by employing one correcting strategy or the other. an overall mix of strategies was ultimately chosen to minimize the bandpass dependence over the entire range of weight sets. Utilizing this mixed strategy, the median error introduced into 10-nm integration by bandpass dependence was only 0.004 CIELAB units. © 1995 John Wiley & Sons, Inc.     

Evaluation of capital cost data. part 7: Liquid waste disposal with emphasis on physical treatment

Capital cost correlations are given for oil-water separators, equalization basins, primary clarifiers, clarifiers and clarifier mechanisms, reverse osmosis unit, ultrafiltration units, gravity filters and miroscreens. Data are included for raw sewage, intermediate and recirculation pumping stations and for preliminary treatment (or bar screens, grit removal, overflow and bypass chamber and Parshall flume), for grit removal, comminution and gas stripping. The correlations are accurate to ± 30%, expressed in Canadian dollars and adjusted to a Marshall and Swift value of 1000. Details as to what components are included in the cost are given. Data are given for the labour and material costs to create a working process module. For inflation indices, a critique of the Engineering News Record, EPA small city, Marshall and Swift, Chemical Engineering and Southam inflation indices suggested that the Marshall and Swift index is most appropriate for the construction and process equipment studied here. Concerning the currency exchange, for the equipment and processes in this study, equipment costs the same whether expressed directly in US or Canadian dollars. To put the current data into perspective, several hundred sources of cost data were analyzed. The major correlations are compared, on a consistent basis, with current data.     

Outlook on fertilizer use efficiency in the tropics

In this paper efficiency of applied fertilizers under tropical conditions is examined. Understanding of the fertilizer efficiency is particularly important for the developing countries mainly because there is need for enhancement of crop yields at a reduced cost. Many of the soil, plant and climatic factors of the tropical regions that contribute to the efficiency of the applied fertilizers have been discussed. Many of the tropical soils are acidic in nature and in these soils efficiency of applied fertilizer is relatively poor, mainly because plant roots are unable to grow and function to their fullest extent in utilizing the soils available nutrients. To enhance yield potentials there is need for understanding of interaction between crop species and soil and climatic variables. Incorporation and adoptation of a suitable application time can greatly enhance efficiency of urea form of nitrogen. Research findings in tropical soils have shown that an initial broadcast application of P and subsequent band treatment is more effective than either method of application alone. Current crop yields in tropical countries are far below the known yield potentials. Such low production potentials are attributed to the lack of suitable crop germplasms and understanding of improved agronomic practices. Intensification of research activities in fertilizer use efficiency in tropical countries is suggested.Senior author formerly was a Research Advisor to EMBRAPA/IICA/World Bank Program in Brazil.     

计算机网络的安全问题及预防措施浅探简

导致的计算机硬件、软件数据而遭到的破坏、更改和泄露就是计算机网络安全问题,而其影响因素则比较复杂,因而,这就需要在加强法制管理,提高防范意识的同时,不断提高防范技术,而且,不仅要被动防御,更要强化主动防护、动态地对网络安全进行防护。     

供电公司运营效率与影响因素分析

运营效率是衡量企业投资效益和资源配置的核心指标,因此,有效提高运营效率是增强供电公司竞争力的重要途径之一。结合供电公司的实际情况,构建了基于SE-DEA的供电公司运营效率评价模型,借助MATLAB数学分析软件,从投入和产出的角度对8家供电公司的运营效率进行比较,详细地分析了影响其效率的主要因素,并针对问题提出了优化运营的有效措施。实例结果表明,此方法实现了对所有决策单元的充分评价与排序,可以对供电公司运营效率进行有效的评价,为管理者提供科学、有效的信息和决策的依据。     

以888-JH为催化剂Na_2CO_3为碱源的脱硫技术

本文着重介绍以888-JH为催化剂,Na2CO3为碱源焦炉煤气(COG)湿式氧化法脱硫工艺的脱硫原理、影响因素,并介绍了现场试验结果。认定单独使用888-JH可以替代PDS+RTS获得脱硫效率99%以上和出口H2S含量小于5mg/m3的较佳脱硫效果。