新形势下普通高校大学生行为管理模式研究

高校是培养人才的摇篮,肩负着科教兴国、人才强国两大历史性战略任务。由于社会环境的复杂化,人际关系的交错性,新时代的大学生行为状况给高校学生管理工作带来了新的挑战。针对新时期大学生行为特点,我们通过加强党建工作、强化学风建设、做好班级自主管理和深化社会服务四个方面工作进行分析,提出了全面引导、约束、规范和优化大学生的行为的建议和对策,从而有效解决新形势下普通高校学生管理工作的实际困难。     

Topology optimization for crashworthiness of thin-walled structures under axial crash considering nonlinear plastic buckling and locations of plastic hinges

Although topology optimization is established for linear static problems, more effort is required for solving nonlinear plastic problems. A new topology optimization approach with equivalent static loads (ESLs) is suggested to find the optimum topologies and locations of plastic hinges of thin-walled crash boxes by considering crash-induced deformation, the main crash energy-absorbing mechanism. Together with finite element method crashworthiness analyses, considering all nonlinearities with rate-dependent plasticity, the method was developed using an appropriate time-incremental scheme of ESLs without removing any high values of loads. Analyses show that the crash boxes with optimum topologies have energy-absorbing capabilities equivalent to the original structure. The proposed method is evaluated for two crashes: a crash box at low speed and a double cell subjected to high-speed collision. The results indicate that this method captures nonlinear crushing behaviours and accurate locations of plastic hinges where, if proper reinforcements are made, energy absorption can be enhanced.     

黑匣子高温测试仪的开发

采用物质的相变吸热原理，可以将高温环境传人保温箱的热量重新排回至高温环境，有效地提高了保温箱的抗高温能力，并对保温箱的隔热性能做了简单的理论推算和测温反向试验。温度测试仪选用超低功耗CPU，具有体积小、耗电少的优点，使黑匣子高温测试仪在运行过程中具有很好的安全可靠性。     

反凝析现象对雅克拉凝析气处理工艺的影响

雅克拉凝析气田位于塔里木盆地北部，地处新疆维吾尔自治区阿克苏地区境内，它是中国石化集团公司西北分公司探明并投入开发的最大凝析气田，采用衰竭式开采。通过对井口物流的相态研究，认识了凝析气的反凝析规律，采取了提高凝析气中C^＋₃收率的方法，以确保外输干气的烃露点达到管输要求，并提高该气田开发的经济效益。在工艺方案设计过程中，通过多种工艺方案比选，确定选用膨胀机进口压力为6.0 MPa的膨胀机制冷工艺， C^＋₃收率达到92％以上，外输干气烃露点满足管输要求。     

WAVE INTERACTION WITH PERFORATED CAISSON BREAKWATERS

The reflection coefficient of perforated caissons and the total horizontal forces acting on them were experimentally and numerically analyzed and discussed when wave propagates normally. To consider the viscosity effect of fluid and nonlinear action of waves on structures, the VOF (Volume Of Fluid) method combined with the k-ε turbulence model was used to simulate the interaction between waves and structures. Governing equations were solved with the finite difference method. Through 2D experimental study in the wave flume, the empirical relationship between the reflection coefficient of perforated caissons and the main affecting factors were obtained from the experimental data using the least square method. Also the correlation between the ratio of the total horizontal force acting on perforated caisson and the force acting on solid caisson and the main affecting factors were regressed from the experimental data.     

区域分割法辅助计算复杂图像面积

介绍计算具有复杂边缘轮廓的图像面积的区域分割法。采用鼠标多边形作图法近似圈定待处理的图像区域。本文由格林定理出发得到有限连续边界与其包围区域面积之间的函数关系,并且应用这一函数关系得出多边形与其包围区域面积的数学关系,近似得到图像区域面积。文中以烟幕图像为例对上述结论进行了验证。文章最后给出了在VC++环境下实现多边形分割的部分源代码。     

基于数字机顶盒的电子选单的设计和实现

基于CATV和PSTN的VOD多媒体数字机顶盒，提出了几种实现双向通信以完成电子节目指南的设计方案，对各种方案的优缺点进行了详细的讨论，并介绍了所采用方案的实现方法。     

Microwave Communication to Moving Parts Inside Machines

Cables to moving parts on a linear actuator in production machines, such as pick-and-place machines, are a source of unreliability owing to the possible breaking of a cable. They further reduce the positioning precision of the actuator owing to additional forces. Slotted waveguide systems for rail vehicles based on 2.4 GHz transmission frequency are well known, but transmitters/receivers and waveguides are bulky. The paper reports on the reduction in size of the equipment, adapted to 5.8 GHz using a commercial off-the-shelf RadioLan communication module. Further, the efficient termination of the wave-guide and a new way to reduce standing-wave effects is also discussed.     

The influence of the fabrication process on the buckling of thin-walled steel box sections

Steel box sections are usually fabricated from flat plates which are welded at the corners. The welding process can introduce residual stresses and geometric imperfections into the sections which can influence their strength. For some thin-walled sections, large periodic geometric imperfections have been observed in manufactured sections. Subsequent investigations have indicated that the imperfections are in fact buckling deformations i.e. the box section has buckled due to welding residual stresses prior to any application of external load. The welding procedure and the behaviour of the box sections under load has been modelled using a finite element analysis that accounts for both geometric and material non-linearities. Tests have been carried out on box sections with a range of width to thickness ratios for the plate elements. Modelling has been shown to give good correlation with the test results. The conditions for buckling to take place as a result of the welding process have been established. A design method has been proposed.     

Spare parts inventory management with demand lead times and rationing

We study an inventory system that consists of two demand classes. The orders in the first class need to be satisfied immediately, whereas the orders in the second class are to be filled in a given demand lead time. The two classes are also of different criticality. For this system, we propose a policy that rations the non-critical orders. Under a one-for-one replenishment policy with backordering and for Poisson demand arrivals for both classes, we first derive expressions for the service levels of both classes. The service level for the critical class is an approximation, whereas the service level for the non-critical class is exact. We then conduct a computational study to show that our approximation works reasonably, the benefits of rationing can be substantial, and the incorporation of demand lead time provides more value when the demand class with demand lead time is the critical class. The research is motivated by the spare parts service system of a major capital equipment manufacturer that faces two types of demand. For this company, the critical down orders need to be satisfied immediately, while the less critical maintenance orders can be satisfied after a fixed demand lead time. We conduct a case study with 64 representative parts and show that significant savings (as much as 14% on inventory on hand) are possible through incorporation of demand lead times and rationing.