光电平台无角位移减振机构运动分析

分析了光电平台的工作环境和角振动对成像质量的影响，应用空间机构学原理和减振理论，设计了一种既具减振功能又能抑制角位移的无角位移减振机构。对减振机构的减振机理及运动特性进行了分析，并利用三维建模软件和MSC．Visual Nastran 4D仿真分析软件对该减振机构进行了三雏实体仿真分析，通过输出的仿真数据及曲线检验无角位移减振原理的正确性。     

钻井液振动筛叠层筛网透筛率的研究

从理论上详细论述了钻井液振动筛叠层筛网对固相颗粒分离的影响 ,首次提出用透筛率的概念定量地描述这一影响 ,并进行了实例计算。研究表明 ,当上下层筛网随机叠加时对透筛率的影响有以下几种情况 :(1)当上下层筛网开孔尺寸相除的余数为零 ,任意组合叠层筛网的透筛率分别为某一常数 ;(2 )上层筛网目数一定时 ,下层筛网目数越大 ,则透筛率越小 ;(3)上下层筛网的目数相差越小 ,透筛率越小 ;(4 )任意目数的上下层筛网随机叠加后 ,其透筛率仅在一个小范围内变化 ,因此任一叠层筛网有其固有的透筛率属性。     

COMAS制丝线振动输送机的振动分析

本文根据振动理论对卷烟厂ＣＯＭＡＳ制丝生产线上的振动输送机建立了相应的力学模型及其振动方程。通过对振动方程的求解，分析了该振动输送机的振动特点，并提出了主要参数的选取原则，以期减少基础的振动。     

反向回转双激振器振动机控制同步的理论研究

本文对两激振器作反向回转的振动机控制同步进行了理论研究和计算机仿真。推导出了考虑质心偏移时两主轴的转矩差方程，在此基础上建立了控制系统的数学模型，设计了具有鲁棒性的非线性变结构滑模控制器．仿真结果表明，控制同步不仅可以消除由质心偏移、电机特性差等原因引起的稳态相位差，同时还能大大降低瞬态相位差，从而使机体的振动方向保持不变，减小起、制动过程中机体的摇摆振动．     

圆盘给料机在韶钢烧结厂的应用

介绍了PDX系列圆盘给料机的结构、性能及其特点，以及该设备在韶钢烧结厂的使用情况，并与老式圆盘给料机进行了比较。     

A vibrating-tube densimeter for fluids at high pressures and temperatures

A vibrating U-tube apparatus has been developed for determining the densities of pure fluids and fluid mixtures at 10-200 MPa and 323-773 K. Measured parameters areP,T, andr (period of vibration). Fluids are injected into the U-tube at constantP andT. Three or more reference fluids are used to calibrate the response of the instrument. Fluid mixtures are produced by pumping pure fluids into T-junctions on the upstream side of the U-tube using high accuracy syringe pumps. An automated syringe pump is used to maintainP at setpoint ±0.01 MPa.T is controlled to ±0.01 K using a closed-loop, electronic signal amplification/feedback system. For mixtures, a statistically significant number of measurements of r are obtained to account for the effects of small heterogeneities in fluid composition (generally <0.005X;). Typically, density data for 15 fluids can be obtained in a 6- to 8-h period. Considering all of the potential sources of error in the experimentation, conservative estimates of uncertainty are as follows:P, ±0.02 MPa;T, ±0.05 K;p (pure fluids), ±0.0005g.cm^–3; andp (fluid mixtures), ±0.0005-0.0010g-cm^–3.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

复合棒弯曲振动的矩阵解法

按组成材料和横截面大小的不同，把复合棒分成若干单元，每单元两端的位移，截面转角，弯矩以及剪力间的关系用矩阵表示，各单元矩阵相乘即复到复合棒总的矩阵，最后由此求解复合棒的共振条件，以及两端振速比，还给出了应用例。     

动态全息图快速引入背景条纹技术

音叉振动镜快速引入背景条纹的动态全息图两次曝光法，适用于一次泵浦的双脉冲全息干涉计量术．其背景条纹的密度和方向具有可调性和重复性．     

Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.