Induced slim ferroelectric hysteresis loops and enhanced energy-storage properties of Mn-doped (Pb0·93La0.07)(Zr0·82Ti0.18)O3 anti-ferroelectric thick films by aerosol deposition

In this study, the high ferroelectric hysteresis loss of (Pb_0·93La_0.07)(Zr_0·82Ti_0.18)O₃ (PLZT 7/82/18) antiferroelectric (AFE) ceramics was reduced by employing a combinatorial approach of Mn acceptor doping followed by thick film fabrication via an aerosol deposition (AD) process. The grains of the as-deposited PLZT 7/82/18 AFE AD thick films were grown by thermal annealing at 550 °C to enhance their electrical properties. Investigation of the electrical properties revealed that Mn-doping results in improved dielectric and ferroelectric properties, increased dielectric breakdown strength (DBS), and energy-storage properties. The Mn-doped PLZT AFE AD films possess a frequency-independent high dielectric constant (ε_r ≈ 660) with low dielectric loss (tan δ ≈ 0.0146), making them suitable candidates for storage capacitor applications. The bipolar and unipolar polarization vs. electric field (P-E) hysteresis loops of PLZT 7/82/18 AFE AD thick films were found to be slimmer than those of their bulk form (double hysteresis) with significantly reduced ferroelectric hysteresis loss, which is attributed to the AD-induced mixed grain structure. The Mn-doped PLZT 7/82/18 AFE AD thick films exhibited a low remnant polarization (P_r ≈ 9.22 μC/cm²) at a high applied electric field (~2750 kV/cm). The energy-storage density and energy efficiency of the Mn-doped PLZT AFE AD thick films were calculated from unipolar P-E hysteresis loops and found to be ~38.33 J/cm³ and ~74%, respectively.     

Development of a novel algorithm for optimal capacitor placement in distribution systems

Optimal capacitor placement in distribution systems solved by the hybrid method of CODEQ (called HCODEQ method) is proposed in this work. The concepts of chaotic search, opposition-based learning, and quantum mechanics are used in the CODEQ method to overcome the drawback of parameters selection in the differential evolution (DE). However, a larger population size must be used in the CODEQ method. That is a drawback for all evolutionary algorithms (EAs). To overcome this drawback, acceleration operation and migrating operation are embedded into the CODEQ method, i.e. HCODEQ method. The use of these two operations can increase the convergence speed without decreasing the diversity among individuals. One benchmark function and various-scale capacitor placement systems are used to compare the performance of the proposed method, CODEQ method, DE, simulated annealing (SA), and ant system (AS). Numerical results show that the performance of the HCODEQ method is better than the other methods.     

SF6气体绝缘电容式电压互感器研制

本文介绍西容公司新研制的一种完全无油化的SF6气体绝缘电容式电压互感器,提出了关键技术问题解决方案和产品绝缘结构的设计思路.并介绍了研制成功的110kV和220kV系列产品的结构、技术参数、性能指标、试验考核情况和产品特点.     

IGBT无损吸收网络的设计

提出一种模块化IGBT无损吸收网络，介绍了其缓冲吸收原理、元件参数计算及一些注意事项。     

一种基于相关函数法铁磁谐振波形研究

对铁磁谐振波形进行了系统的分类分级,提出了一种基于Matlab的相关函数方法,并且利用大量数据进行对比,已经得到了效果验证,经过桂林市电力电容器责任有限公司认证,具有良好的实际效果。     

Electrodeposition of polypyrrole on aluminium in aqueous tartaric solution

The electrosynthesis of polypyrrole (PPy) has been achieved on aluminium in aqueous medium of tartaric acid by means of cyclic voltammetry, potentiostatic and galvanostatic techniques. Scanning electron microscopy (SEM) and X-ray microanalysis by energy spectroscopy dispersion (EDS) applying on surfaces show that the PPy coating is developed from the metal surface through the cracks of the initial Al₂O₃ layer.A mechanism involving the participation of the supporting electrolyte and the pyrrole (Py) in distinct active sites was proposed based on the linear sweep voltammetry. It is observed for all applied electrochemical techniques that the pyrrole concentration has to be higher than 0.1 M to allow the polypyrrole electrodeposition in acid medium.Scanning electron microscopy, secondary electrons (SE) and backscattering electrons (BE), shows that the PPy coating obtained in galvanostatic and potentiostatic modes starts with small islands at weak applied potentials or current densities. Moreover, EDS reveals a good homogeneity and compactness of the film achieved in galvanostatic method. The corrosion results in 3% NaCl medium show that the PPy coating decreases the corrosion behaviour of the aluminium. The bilayer Al₂O₃/PPy shows a capacitor with future applications.     

接触器铁芯间隙的快速测量

本文介绍了应用单片机和电容传感器技术来检测交流接触器铁芯气隙的快速测量仪。     

High temperature field effect hydrogen and hydrocarbon gas sensors based on SiC MOS devices

The growing need for reliable, efficient, high temperature hydrogen and hydrocarbon monitoring has fueled research into novel structures for gas sensing. Metal oxide semiconductor (MOS) devices employing a catalytic metal layer have emerged as one of the leading sensing platforms for such applications, owing to their high sensitivity and inherent capability for signal amplification. The limited operating temperature of such devices employing silicon as the semiconductor has led research efforts to focus on replacing them with devices based on silicon carbide (SiC). More recently, MOS devices having different oxide layers exhibiting improved sensing performance have emerged. Considering the amount of research that has been carried out in this area in recent times, it is important to elucidate the new findings and the gas interaction mechanisms that have been ascribed to such devices, and bring together several theories proposed by different research groups. In this paper we first highlight the needs which have driven research into SiC based field effect hydrogen and hydrocarbon sensors, illustrate the various structures being investigated, and describe the device evolution and current status. We provide several sensing examples of devices that make use of different oxide layers and demonstrate how their electrical properties change in the presence of the gases, as well as presenting the hydrogen gas interaction mechanisms of these sensors.     

三相电容电机无功补偿分析

三相电容电机是一种新型节能电机,与传统的三相异步电动机相比,其效率和功率因数有明显提高。详细分析了异步电动机无功补偿的原理和意义,并将三相异步电动机与传统异步电动机定子出线端并接电容提高功率因数的方法进行对比,同时进行自激分析。从实验和理论的数据可见,在提高功率因数方面,三相电容电机选择较小的电容器就能达到与普通三相异步电动机相同的效果,不会出现自激现象,无功补偿具有更好的效果。