Colossal dielectric response and relaxation behavior in novel system of Zr4+ and Nb5+ co-substituted CaCu3Ti4O12 ceramics

In this work, we developed a novel system of isovalent Zr⁴⁺ and donor Nb⁵⁺ co-doped CaCu₃Ti₄O₁₂ (CCTO) ceramics to enhance dielectric response. The influences of Zr⁴⁺ and Nb⁵⁺ co-substituting on the colossal dielectric response and relaxation behavior of the CCTO ceramics fabricated by a conventional solid-phase synthesis method were investigated methodically. Co-doping of Zr⁴⁺ and Nb⁵⁺ ions leads to a significant reduction in grain size for the CCTO ceramics sintered at 1060 °C for 10 h. XRD and Raman results of the CaCu₃Ti_3.8-xZr_xNb_0.2O₁₂ (CCTZNO) ceramics show a cubic perovskite structure with space group Im-3. The first principle calculation result exhibits a better thermodynamic stability of the CCTO structure co-doped with Zr⁴⁺ and Nb⁵⁺ ions than that of single-doped with Zr⁴⁺ or Nb⁵⁺ ion. Interestingly, the CCTZNO ceramics exhibit greatly improved dielectric constant (~10⁵) at a frequency range of 10²–10⁵ Hz and at a temperature range of 20–210 °C, indicating a giant dielectric response within broader frequency and temperature ranges. The dielectric properties of CCTZNO ceramics were analyzed from the viewpoints of defect-dipole effect and internal barrier layer capacitance (IBLC) model. Accordingly, the immensely enhanced dielectric response is primarily ascribed to the complex defect dipoles associated with oxygen vacancies by co-doping Zr⁴⁺ and Nb⁵⁺ ions into CCTO structure. In addition, the obvious dielectric relaxation behavior has been found in CCTZNO ceramics, and the relaxation process in middle frequency regions is attributed to the grain boundary response confirmed by complex impedance spectroscopy and electric modulus.     

An adaptive local search algorithm for vehicle routing problem with simultaneous and mixed pickups and deliveries

The Vehicle Routing Problem with Simultaneous Pickup and Delivery (VRPSPD) is an extension to the classical Vehicle Routing Problem (VRP), where customers may both receive and send goods simultaneously. The Vehicle Routing Problem with Mixed Pickup and Delivery (VRPMPD) differs from the VRPSPD in that the customers may have either pickup or delivery demand. However, the solution approaches proposed for the VRPSPD can be directly applied to the VRPMPD. In this study, an adaptive local search solution approach is developed for both the VRPSPD and the VRPMPD, which hybridizes a Simulated Annealing inspired algorithm with Variable Neighborhood Descent. The algorithm uses an adaptive threshold function that makes the algorithm self-tuning. The proposed approach is tested on well-known VRPSPD and VRPMPD benchmark instances derived from the literature. The computational results indicate that the proposed algorithm is effective in solving the problems in reasonable computation time.     

An agile model for the eco-design of electric vehicle Li-ion batteries

Numerous design choices need to be made at several levels when designing high-tech products: technology, processes, architecture, components, materials… and these choices need to be made in relation to the product life cycle with the corresponding experts for each stage of the life cycle. At the same time, to ensure product sustainability, a specific focus on the future potential environmental impacts is highly recommended. In this research, an agile model is proposed to help designers make decisions while monitoring environmental performance indicators of high-tech solutions. The concept of Critical Product Life Cycle Parameters had to be introduced to facilitate the eco-design of the final product. The approach is illustrated by the Electric Vehicle Li-Ion Batteries case study.     

Assessing the cost-effectiveness of electric vehicles in European countries using integrated modeling

Electric vehicles (EVs) are considered alternatives to internal combustion engines due to their energy efficiency and contribution to CO₂ mitigation. The adoption of EVs depends on consumer preferences, including cost, social status and driving habits, although it is agreed that current and expected costs play a major role. We use a partial equilibrium model that minimizes total energy system costs to assess whether EVs can be a cost-effective option for the consumers of each EU27 member state up to 2050, focusing on the impact of different vehicle investment costs and CO₂ mitigation targets. We found that for an EU-wide greenhouse gas emission reduction cap of 40% and 70% by 2050 vis-à-vis 1990 emissions, battery electric vehicles (BEVs) are cost-effective in the EU only by 2030 and only if their costs are 30% lower than currently expected. At the EU level, vehicle costs and the capability to deliver both short- and long-distance mobility are the main drivers of BEV deployment. Other drivers include each state’s national mobility patterns and the cost-effectiveness of alternative mitigation options, both in the transport sector, such as plug-in hybrid electric vehicles (PHEVs) or biofuels, and in other sectors, such as renewable electricity.     

Design for comfort and social interaction in future vehicles: A study on the leg space between facing-seats configuration

With the advent of future vehicles, passengers expect to travel in comfort, and the free leg space between facing-seats could be an issue due to the unsuitability for all people, according to their anthropometric variability. A previous investigation survey showed the need to increase the leg-space between facing seats and, if installed, to improve the surface of the table placed in between. So, four different distances between seat-pans front edges of facing seats have been set-up and tested (44 cm, 51 cm, 58 cm, 65 cm) with a table in between. 13 couples of participants with different heights took part to experiments. The aim was to investigate the relationship between facing-seat distances and passenger wellbeing in terms of postural comfort and social interaction. Postural comfort has been analysed through optical tracking (for postural angles overtime) and questionnaires (perceived comfort). Social interaction feelings have been investigated with questionnaires. Experiment results showed the suitable distance could be 51 cm keeping the same table surface; otherwise, the 65 cm one could be ideal changing the table surface.Relevance to industryWith the advent of autonomous driving, vehicle manufacturers and designers are working hard to define new paradigms of public transportation in terms of seat layout, passenger wellbeing and interiors’ design. This paper contributes to increasing the general knowledge on the effects of distance between facing seats on postural comfort and social interaction.     

智能型电子式变频电动执行器及其应用

针对原有电动执行器只有以低速运行，通过极强的微调才能修正微小偏差这一缺点，提出智能型电动执行器与各种阀体譬合，利用数字化变频技术，改造目前采用模拟技术的电动执行器，使之具有变速运行、动态响应块，调节定位精度高、稳定性好，故障率低、使用寿命长和应用场合广泛的特点。     

The hydrogen economy, fuel cells, and electric cars

Hopes have again been raised about developing a “hydrogen economy”, in which hydrogen could be expected to replace oil and natural gas for most uses, including transportation and heating. It is again being claimed that hydrogen will be a widely available, clean, safe fuel. This article argues that such expectations are almost certainly illusory. Hydrogen, like electricity, is not an energy resource but an energy carrier. It takes more energy to extract hydrogen from water than burning the hydrogen can ever provide. There are also inevitable losses in storage, transmission, and final mechanical or heating applications. The question then turns on the efficiency—and safety—of the entire chain of conversion, from the energy source (fossil, solar, or other) to the final use. Moreover, energy sources (preferably renewable, for the long term) can be used for the direct creation of electricity, which can be introduced into the existing grid without requiring a vast investment in a new hydrogen distribution system. In addition, a hydrogen-based system would be unacceptably dangerous. This report will present a detailed technical and economic analysis of the problems with the proposed hydrogen economy and the advantages of some alternatives, principally electricity-based. A hypothetical case of what would be required for a hydrogen filling station serving the general public is closely examined.     

用仿真工具优化车辆动力系统(一)

在本文的第一部分，介绍了一种理想的车辆动力系统的计算机辅助开发过程。它显示了现代仿真技术在产品持续发展过程中的作用，该技术采用硬件回路作非在线的仿真，并通过现代化的试验手段对车辆进行匹配。特别重要的是提供了将电控变速器和发动机控制单元综合的可能性。接着是在线仿真在诸如发动机和变速器模式方面的应用和发展，它是上述开发过程的基础。根据上述的方法论，本文论述了仿真技术已取得的成绩和将来的应用可能性。     

硅钢片模具设计及其线切割加工

论述了电磁铁铁芯 (硅钢片 )模具的设计要点及其线切割加工的技巧 ,提出了提高模具加工精度和使用寿命的有效措施。     

微型计算机的接触电流和接地线电流的测量

介绍了微型计算机的两种不同类型的泄漏电流的危害及其测量方法。