Fluorescence and IR characterization of epoxy cured with aliphatic amines

Cure reactions of the stoichiometric mixtures of diglycidyl ether of bisphenol A (DGEBA) and two very low molecular weight aliphatic polyether diamines (PED) were studied by using fluorescence and mid- and near-IR spectroscopic techniques. As the cure proceeded, the primary amine groups in PED are converted to the secondary and the tertiary amines. Near-IR spectral analysis was used to calculate the concentration of the three amine groups as a function of cure time. The decrease in the fluorescence intensity of DGEBA at about 307 nm was observed due to more effective quenching of the tertiary amine groups in PED, in comparison to the primary and the secondary amine groups. A large decrease in fluorescence intensity at 75 and 95 °C cure was observed. The amount of all the amine species was estimated from NIR spectra to shed light on the cure kinetics of PPO (polypropylene oxide) in comparison with PEO (polyethylene oxide) epoxy, as well as to explain their fluorescence behavior.The fluorescence intensity changes were correlated to the extent of epoxy reaction obtained by mid- and near-IR spectroscopy.     

Synthesis of polyanilines with pendant fluorescent units

Functionalized polyanilines containing biphenyl, terphenyl, carbazole, anthracene, and 4-n-hexylphenyl moieties were synthesized though the reaction of polyaniline in emeraldine base form with sodium salt of corresponding vinylketoaromatics with quantitative yields. Polymers were characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and thermogravimetry. The emission characteristics of these polymers in N-methyl-2-pyrrolidone solution were examined. The functionalized polyanilines exhibited an intense green emission.     

Interfacial hybridization kinetics of oligonucleotides immobilized onto fused silica surfaces

Fused silica optical fibers have been used in an intrinsic mode optical configuration as biosensors for fluorescence based detection of hybridization of nucleic acids. In this work, the kinetics of hybridization of single-stranded oligonucleotides that were covalently immobilized were studied. The probe DNA was dT₂₀, and the target was Fluorescein-labeled non-complementary (dT₂₀) or complementary (dA₂₀) oligonucleotide. Chronofluorimetric monitoring of the adsorption and hybridization processes was used to investigate oligonucleotide films of different density, in different salt concentrations, at temperatures of 25 and 40 °C, with the concentration of the target DNA being 0.005–0.1 μM. Mathematical models based on first- and second-order Langmuir adsorption have been examined to describe both the adsorption and the hybridization processes. Experimental data were processed using the models, and the hybridization kinetics were calculated. Hybridization kinetics on these optical fiber DNA sensors was found to be up to three orders faster than results presented for a number of other experiments using different immobilization chemistries.     

Visible Light Excitation Characteristics of Novel Infrared Up-conversion Materials

The Fluorescence excitation spectrum, emission spectrum and infrared up-conversion luminescence excitation spectrum are measured. The results of spectrum measurement show that the electron trapping materials CaS: Eu, Sm are of visible light excitation. The mechanism of visible light excitation is analyzed.     

Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

无荧光防塌降失水剂KH－931的合成与性能

ＫＨ－９３１是以褐煤、丙烯酰胺、丙烯腈为原料制得的无荧光防塌降失水剂。本文简介了ＫＨ－９３１的合成条件，并对ＫＨ－９３１的防塌作用与降滤失作用进行了室内评定。实验结果表明，ＫＨ－９３１的防塌、降失水效果良好，并具有加量少、无荧光的特点。腐殖酸衍生物，降滤失剂，页岩抑制剂，多功能钻井液处理剂，荧光性，实验室研究     

Correlation of vibrational intensity with fluorescence lifetimes in π conjugated polymers

A series of novel pi (π) conjugated polymers, originating from the archetypical Polyphenylene vinylene, in which the phenyl units are successively replaced by the larger naphthyl and anthryl acene units, were previously found to have a well-defined relationship between their relative fluorescence yields and their vibrational characteristics, as determined by Raman spectroscopy. In this study the Strickler-Berg equation is used to probe the influence of continual substitution of higher order acene units into the conjugated backbone in terms of the variation of the radiative and non-radiative rates. The deconvolution of the radiative and non-radiative rates enables the correlation of the reduction of the Raman intensity and concomitant increase in the fluorescence yield with the reduction of the non-radiative rate. This confirms that the reduction of the non-radiative rate is the dominant process introduced by the vibrational confinement originating from systematic substitution of higher order acene units into the polymer backbone.