A 3-D motion tracing system in High School Physics teaching

Abstract This article presents a study of a large scale incorporation of one data acquisitionsystem into physics teaching in Israel. By 1994 about 30% of the schools throughout the country used the V-scope, a 3-D multibody motion tracing system, in their lab programme. The views and reactions of post-training teachers, experienced teachers and students on various aspects of using the system are described, analysed and compared.     

Motion and structure interpretation of an optical switch

This paper focuses on tracking, reconstruction and motion estimation of a well-defined MEMS optical switch from a microscopic view. For out-of-view reconstruction, a homography capable of transforming feature points and feature lines between a microscopic image and a CAD model of the switch is implemented. The homography between two sequential microscopic images is decomposed and factorized for motion estimation. Optical flow has also been explored to provide rough estimations of rotation centre and angle. The paper also illustrates motion parameter optimization principles to deal with uncertainty inherent in micro world. After non-linear optimization, estimation accuracy for rotation angle and rotation centre can reach 0.06° and pixel level, respectively.     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

视频编码中的块运动估计算法

在视频压缩的一些国际标准，如Ｈ．２６１，Ｈ．２６３，ＭＰＥＧ０－１，ＭＰＥＧ－２，ＨＤＴＶ中，视频系统编码器的复杂性最主要取决于运动估计。下文以ＭＰＥＧ－２编码器为例，通过计算机模拟实验，得出了一些常用运动估计算法的对比实验结果，以及采用常用的几种匹配函数的对比实验结果。     

三菱运动控制器在婴儿纸尿裤生产线机上的应用

本文介绍了纸尿裤生产线自动控制系统的硬件组成和应用软件。选用三菱运动控制器，设计出满足高精度相位、速度、位置、张力控制要求的自动化系统。     

Stereo and motion correspondences using nonlinear optimization method

This paper presents a new approach for using stereo and motion correspondences to solve the problem of tracking multiple independently moving features. In this approach, quantitative relational structure (QRS) is proposed as a framework for the integration of stereo–motion correspondences. The similarity function, tightly coupled to stereo and motion cues, is constructed on QRS, and then energy function E² consisting of the similarity function is defined. The tracking problem can be converted into the maximization problem of the energy function E². The stereo and motion correspondences that maximize E² are recovered by applying an extended graduated assignment algorithm. The relaxation labeling method is also presented for the comparison with the proposed method. Experimental results are presented to illustrate the performance of the proposed method.     

彩色等离子体显示屏中运动失真现象的研究

本文研究了等离子体显示屏在显示动态的画面时产生运动失真现象的原因，并在比较国内外各种解决方法的基础上提出了一种优化的ADS驱动方式。在优化的ADS驱动方式基础上开发的14时彩色等离子体原型样机表明优化的ADS驱动方式在视觉闪烁感和运动图像质量方面都有了很大的提高。     

Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

Elasticity of Space-Time: Basis of Newton’s 2nd Law of Motion

In this paper we derive Newton’s 2nd Law of Motion from the constitutive equation of elasticity of a space-time continuum in four dimensions. This we do by introducing a four-dimensional material continuum with a Minkowskian metric, in analogy with Einstein’s general theory of relativity. The four-continuum is deformable in both space and time. The physics of the deformation is embedded in a variational principle, which is a form-invariant extension of its classical mechanical counterpart in three dimensions, but with the acceleration term absent. General dynamic equations of elasticity in four dimensions are thereby derived. When the constraint of temporal inextensibility (universal time) is introduced, these equations yield readily the dynamic equations of elasticity in three dimensions. The presence of the inertia term in these equations, is a direct consequence of the temporal curvature induced by the deformation of the four-continuum. Newton’s law of motion for rigid bodies follows when the additional constraint of spatial inextensibility is introduced.     

Development and implementation of a NURBS curve motion interpolator

This paper deals with the issues of development and implementation of a real-time NURBS interpolator for a six-axis robot. Using an open-architecture controller system as a testbed, a real-time NURBS curve interpolator was developed, implemented and tested. Sample runs were conducted with the resulting trajectories measured in real-time during robot motion. The resulting trajectories are analyzed, discussed and compared with those from a commonly used point-to-point approximation technique. The real-time NURBS curve interpolator's feasibility, advantages and related issues are also discussed.