Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube

Effects of superficial gas velocities to a draft tube, to an annulus section and particle size on the solid circulation rate (G,) have been determined in an internally circulating fluidized bed (0.28 m I.D. × 2m high) with an orifice type draft tube. The solid circulation rate from the draft tube to an annulus section increases with increasing gas velocities to the draft tube(U _d ) and annulus section (U_a) and consequent increase in pressure drop across the orifice (ΔP_or). However, the values ofG _s decrease by 7–21% with increasing particle size from 86 to 288 μm. The pressure drop across the orifice increases with increasingU _d andU _a . However, ΔP_or decreases by 5–23% with increasing particle size. To predictG _s in an internally circulating fluidized bed, a correlation is proposed as a function of ΔP_or This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement Korea University.     

基于WZ-2188超声波流量计煤气流量检测及其补偿中的应用

根据梅山钢厂石灰窑现有采用孔板流量计测量煤气流量所存在的问题,提出了一种基于WZ-2188超声波流量检测为基准,结合孔板流量计流量检测的双重检测方法,实现了石灰窑供气系统煤气流量的准确测量,并以此为基础实现煤气流量在线补偿。此补偿方法对于采用孔板流量计测量煤气流量的套筒石灰窑均适用。     

孔板流量计的误差分析及修正

孔板流量计是一种广泛应用于化学工业的流量测量仪表。它在安装、使用和维护等方面存在很多的不足,从而容易产生流量测量的误差。通过对孔板流量计的研究,得出引起流量测量误差的各种原因及相关消除方法;并通过补偿和技术改造等措施对测量误差进行了修正,从而保证了流量测量的准确性和实效性。这对于孔板流量计的准确计量具有一定的指导作用。     

Sediment flushing upstream of large orifices: An experimental study

Due to the constricting and localization of flow by orifices, these hydraulic structures are commonly used in dams and water impoundment reservoirs to flush deposited sediments. They are also one of the most important flow measurement structures. In this study, the flow characteristics at upstream of a large circular orifice located at the wall of a water reservoir, in the case that the sediments were accumulated behind it, was investigated. The experiments were performed at the hydraulic laboratory of Shahid Bahonar university of Kerman, in a model of rectangular reservoir. The experiments were performed in two parts. First, the flow behavior during the scour development at upstream of the orifice and the extent of sediment erosion due to the orifice flow was investigated. Next, a semi-confined structure was located at the upstream of orifice to increase the sediment removal efficiency. The effect of the geometrical characteristics of structure on the dimensions of scour hole was determined. It was observed that the interactions of water, sediment and structure generated strong vortices upstream of the orifice, which caused the lifting and sweeping away of a large amount of sediment from the reservoir and let to formation of a semi-cone hole upstream of the orifice.     

引发电控模块短路之PCB孔口发黑原因研究

PCB在使用过程中在经常会出现短路故障,对相关故障电子模块进行分析时发现模块PCB较多孔口存在发黑物质,严重者出现黑色物质连孔,通过测试确认黑色物质具有导电功能。本文通过理论分析及模拟实验论证,确认了黑色物质是引发电子模块故障的根源,同时明确了其产生机理,并提出了针对性的预防措施。     

Discharge characteristics of orifice spillway under oblique approach flow

Orifice type spillways are provided in the dam at lower level for facilitation in flushing of the sediment from the reservoir in addition to spilling the flood water. However, in most of the hydraulic structures, particularly in the earthen and rockfill dams, the spillway is not a part of the dam and it is provided on either of the banks of the river which results in oblique approach flow to the spillway that likely to affect the discharging capacity of the spillway. Presented in this paper is an experimental study for discharge characteristics of orifice type spillway under straight and oblique approach flow. Analysis of data indicates that discharge through the spillway decreases with increase of obliquity of the flow. The effect of the obliquity has been quantified and discharge equations for one, two and three simultaneous opening of the bays have been proposed.     

A neural network developed in a Foundation Fieldbus environment to calculate flow rates for compressible fluid

This paper proposes the development of an artificial neural network multilayer perceptron, implemented in a Foundation Fieldbus environment, to calculate the flow rate of natural gas by using an orifice plate in a closed pipe. The principal benefit of using neural networks lies in their low computational cost and simplicity of implementation, which allows just standard blocks to be used, making the technology independent of the Foundation Fieldbus system manufacturer. To perform the calculation, the proposed methodology relies on static pressure, temperature and differential pressure measurements, which are typically available in industrial plants. The developed methodology generates highly accurate results, and this approach can be implemented at a relatively low cost for Foundation Fieldbus system users.     

Experimental study on prediction model of wet gas pressure drop across single-orifice plate in horizontal pipes in the low gas phase Froude number region

The pressure drop prediction of wet gas across single-orifice plate in horizontal pipes had been solved satisfactorily under an annular-mist flow in the upstream of orifice plates. However, this pressure drop prediction is still not clearly determined when the upstream is in an intermittent flow or stratified flow, which is corresponding to a region of low Fr_G (gas phase Froude number) in the flow pattern map of wet gases. In this study, the wet gas pressure drop across a single-orifice plate was experimentally investigated in the low Fr_G region. By the experiment, the flow pattern transition in the downstream of single-orifice plates, as well as the effects of Fr_G and Fr_L (liquid phase Froude number) on Φ_G (gas phase multiplier), were determined and compared when the upstream is in the flow pattern transition and the stratified flow region, respectively. Prediction performances were examined on the available pressure drop models. It was found that no model could be capable of jointly predicting the wet gas pressure drop in the low Fr_G region with an acceptable accuracy. With a new method of correlating Fr_G and Fr_L simultaneously, new correlations were proposed for the low Fr_G region. Among which the modified Chisholm model shows the best prediction accuracies, with the prediction deviations of Φ_G being within 7% and 3% when the upstream is in flow pattern transition and stratified flow region, respectively.     

浅析提高标准节流装置在计量中的准确性

介绍柳钢使用的标准节流装置计量系统，并对设计、安装、维护的特点进行探讨，保证节流式流量计的正常运行。