Nonreactive atom/molecule-surface scattering within the finite basis wave packet method

A quantum wave packet code for studying nonreactive scattering of closed-shell atoms or diatomic molecules from a rigid surface is described. The time evolution relies on the Chebychev propagator. Up to 5 collider degrees of freedom, 3 in translation and 2 in rotation, are treated in a pseudospectral way with the momentum or finite basis representation as the primary space. Potential matrix elements are efficiently evaluated by means of sequential 1D transformations between momentum and coordinate spaces. Fast Fourier transforms are performed for the translational and azimuthal coordinates whereas a Gauss-Legendre transform is used for the polar coordinate. This pseudospectral strategy minimizes memory requirements because no off-diagonal Hamiltonian matrix elements need to be stored. In addition, a wide variety of physical systems can be studied since no particular functional form is imposed for the interaction potential.     

大功率晶体管的保护电路

大功率晶体管调速系统中作为开关元件使用时，共优点是开关频率比可控硅的高，但是不注意保护就容易损坏。着重研究过电流故障，并对保护作用的影响进行了分析，进而提出了防止过电流的方法和工作原理。     

用C51系列单片机设计物体分级设备的测量光幕

首先介绍了光幕测量高度的原理 ,给出了高度测量光幕的一种实现方法 ,分析了由该方法设计的系统结构和主要性能。从而彻底解决了相邻通路间的干扰 ,提高了测量精度。     

流程离心泵变频调速的实践与探讨

探讨了变频调速在流程离心泵上应用的可行性，同时阐述了变频调速器功率的确定及其使用效果。     

活塞综合检测仪的研制

介绍了活塞综合检测仪的功能、组成、检测过程、测量原理与方法和主要技术性能指标。该仪器是国内研制的第一台智能型活塞综合检测仪。实际应用表明,这是一台高精度、高稳定性和高效率的检测仪器。     

溶液扩散系数自动测量系统

结合实时法全息干涉计量和数字图象处理技术，提出了一种溶液扩散系数的自动测量系统。在干涉图的处理中，采用了相位检测和曲线拟合技术，得到了亚象素的测量精度。     

高速钢W6Mo5Cr4V2的脱磷试验

在３０ｋｇ感应炉上用ＣａＯ－Ｎａ２ＣＯ３－ＣａＦ２－ＦｅｘＯ（ＭｏＯ３）渣、ＭｏＣｌ６粉剂和Ａｌ－Ｃａ合金作脱磷剂对高速钢Ｗ６Ｍｏ５Ｃｒ４Ｖ２进行脱磷试验。结果表明，ＣａＯ－Ｎａ２ＣＯ３－ＣａＦ２－ＦｅｘＯ渣的脱磷效果最好，一般脱磷率可达２６％￣５６％。     

单片机控制泄漏电流测试仪

以8031单片机为核心的泄漏电流测试仪的硬件结构和软件设计。     

��Ȼ����������ϵͳ�ļ춨��У׼

当前我国管道天然气计量系以体积表示，就其计量器具而言，差压式流量计、容积式流量计和速变式流量计都有，但大流量计量大多仍采用标准孔板差压式流量计，其流量计量标准招待我国SY／T6143－1996《天然气流量的标准孔板计量方法》。文章介绍目前常用的三种流量计的优缺点比较；天然气标准孔板差压式流量计算机自动计量系统的检定，其中包括：标准孔板节流装置，静压、差压变送器、温度传感器、数据采集系统等组件的检定；以及计量器具的正确使用和维护。最后，文章指出目前流量计量的发展主要是二次仪表的发展，籍助应用计算机大大提高流量法的测量范围和准确度，但对用户来说，应选择性／价比合适的仪表，并要考虑所选用仪表要便于检定、维护，同时，计量检定部门则应跟上发展，为广大用户提供技术支持。     

An experimental study on the pumping performance of molecular drag pumps

The pumping performance of molecular drag pumps (MDP) has been investigated experimentally. The experimented MDPs are a disk-type drag pump (DTDP), helical-type drag pump (HTDP) and compound drag pump (CDP), respectively. In the case of the DTDP, spiral channels of a rotor are cut on both upper surface and lower surface of a rotating disk, and the corresponding stator is a planar disk. In the case of the HTDP, the rotor has six rectangular grooves. The CDP consists with the DTDP, at lower part, and with the HTDP, at upper part. The experiments are performed in the outlet pressure range of 0.2–533 Pa. The inlet pressure and compression ratio are measured under the various conditions of outlet pressure and throughputs, and nitrogen is used for the test gas. At the outlet pressure of 0.2 Pa, the ultimate pressure has been reached to 1.0 × 10⁻² Pa for the HTDP, 1.3 × 10⁻⁴ Pa for the DTDP, and 3.6 × 10⁻⁵ Pa for the CDP. The maximum compression ratio of the CDP is much higher than those of the DTDP or HTDP. Consequently, the ultimate pressure of the CDP is the lowest one.