多级复合布尔函数性能研究

本文研究了加法复合布尔函数和乘法复合布尔函数,在平衡性、k次项系数、K次扩散准则(PC)、相关免疫 性(CI)、Walsh谱、代数次数、小项分布等方面得到了一批新结果。     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

与特定密码函数线性等价的布尔函数谱和自相关特征

对线性等价意义下2个布尔函数的密码学性质的异同做了进一步的分析，得到了一个布尔函数线性等价于某个具有m阶相关免疫性的布尔函数的充分必要条件和线性等价于某个满足k次扩散准则的布尔函数的充分必要条件，在线性等价意义上，给出了由不具有相关免疫性且不满足扩散准则的布尔函数，构造既具有相关免疫性、也满足扩散准则的布尔函数的实例。     

多跳相干探测光谱幅度码标记交换系统传输特性分析

提出了一种基于标记栈技术的两跳相干探测光谱幅度码(SAC)标记交换系统.利用仿真软件,搭建了包含两个转发节点、两个156 Mb/s光谱幅度码标记、与40 Gb/s差分正交相移键控(DQPSK)净荷的光标记交换系统.利用接收光功率与光信噪比(OSNR)分析系统传输性能,并得到结论:经两个节点传输后,标记与净荷产生的功率代价与OSNR代价均未超过3 dB.     

SAC0307-xNi/Ni焊点的IMC及镍镀层的消耗

利用扫描电镜(SEM)对焊点SAC0307/Ni(Sn-O.3Ag-0.7Cu/Ni)和SAC0307-0.05Ni/Nj(Sn-O.3Ag-0.7Cu-0.05 Ni/Ni)经过180℃老化后的界面金属问化合物(IMC)的微观结构及镍镀层的消耗进行了研究.结果表明,回流焊后,SAC0307/Ni和SAC0307-O.05Ni/Ni焊点的IMC层均为(Cu_(1-x)Ni_x)_6Sn_5,且随着老化时间的延长,IMC层的厚度均逐渐增加,化合物类型没有变化,但IMC的化学组成有所改变.SAC0307-0.05Ni/Ni焊点中IMC层形貌为蠕虫状,厚度比不加镍时有所降低.回流焊后两种钎料焊盘的镍层消耗几乎相同,但老化384h后SAC0307/Ni的焊盘镍层的剩余厚度明显比SAC0307-0.05Ni/Ni的小.因此,钎料中添加适量的镍可以有效地降低焊盘镍层在时效过程中的消耗速率,即显著提高镍焊盘的抗老化能力.

Abstract：

The micrestmcture of interfacial IMC and the consumption of Ni layer for SAC0307/Ni ( Sn-0.3Ag-0.7Cu/Ni ) soldered joint and SAOY307-0.05Ni/Ni (Sn-O. 3Ag-0.7Cu-0.05Ni/Ni) soldered joint after aging at 180℃ were studied by scanning electron microscope( SEM ). The results indicated that the IMC layer of SAC0307/Ni and SAC0307-0.05Ni/Ni are both (Cu_(1-x),Ni_x)_6Sn_5 after reflow soldering. With the increasing of aging time, the thickness of IMC layer increases gradually, the type of IMC is not changed, but the chemical composition changes. The morphology of IMC is stormshaped and the thickness of IMC is much thinner when SAC0307 solder added 0. 05 % Ni is used. The consumption of Ni layer is nearly the same using both solders "after the first time reflow soldering, but the residual thickness of the Ni layer in SACO307/Ni solder is thinner than that in SAC0307-0.05Ni/Ni after aging for 384 h. So solders with a little Ni element can decrease the consumption rate of Ni layer effectively during aging, that is, the aging-resistant abihty of Ni pad is improved obviously.     

关于S盒的几点注记

分析了Ｓ盒的平衡性，相关免疫性，严格雪崩性和非线性度的各种可能定义及它们之间的相互关系，提出了要Ｓ盒采用这些准则的定义。     

Path Planning and Tracking Control for Parking via Soft Actor-Critic Under Non-Ideal Scenarios

Parking in a small parking lot within limited space poses a difficult task. It often leads to deviations between the final parking posture and the target posture. These deviations can lead to partial occupancy of adjacent parking lots, which poses a safety threat to vehicles parked in these parking lots. However, previous studies have not addressed this issue. In this paper, we aim to evaluate the impact of parking deviation of existing vehicles next to the target parking lot(PDEVNTPL) on the au...     

一种离散时间直接自适应控制算法

应用给出的离散时间直接自适应控制算法改进了离散简单自适应控制的一些缺陷,能够在计算控制律不违反因果律的条件下,使被控对象的输出直接跟踪理想参考模型输出.应用Lyapunov函数和正实引理证明了算法的收敛性,并通过仿真研究说明了算法的有效性和可行性.     

性能最优化布尔函数的构造

考虑各项性能指标的相互联系,以构造综合性能最优化的函数为目标,以Bent函数为基础,综合运用离散Walsh谱和特征矩阵工具,通过级连、分裂和有条件修改函数输出序列,提出了性能最优化的函数构造法。该构造法可以根据不同需要灵活构造同时满足多个性能要求的多种函数。     

性能好的布尔函数的研究

对n(n=3,4,5)个变量的布尔函数进行了研究,得出了满足平衡性、相关免疫性、SAC和高的代数式次数的布尔函数的精确数目,利用它们可以构造出满足上述特性的任意n(n>5)个变量的布尔函数。