Experimental and theoretical study on H2/CO2 separation by a five-step one-column psa process

An experimental and theoretical study is performed for bulk separation of H₂/CO₂ mixture (70/30 volume %) by PSA process with zeolite 5A, a process widely used commercially in conjunction with the catalytic steam reforming of natural gas or naphtha. For the optimized adsorption conditions of PSA, the characteristics of adsorption/desorption characteristics have been studied through breakthrough and desorption experiments under various conditions. The purge-to-feed ratio is important to the H₂ product purity only at a long adsorption step time. H₂ could be concentrated from 70% in the feed to 99.99% at H₂ recovery of 67.5%. The results of all five steps in PSA are successfully predicted by the LDF model considering an energy balance and nonlinear isotherm. For the model, the effective diffusivities (D,) are obtained separately from the uptake curves of H₂ and CO₂. The Langmuir-Freundlich isotherm is used to correlate the experimental equilibrium data and is very well fitted to the results.     

依据角度位置变速的铺匀器控制系统

用角度测量传感器，检测铺匀器的角度变化，并用新型的电、液控制技术，实施了对铺匀器的变速控制。此设计经实际使用，效果良好。     

水分对分子筛结构及吸附性能的影响

分子筛是变压吸附制氧过程中最重要的组分,使用中该组分常出现吸水失效问题,极大地影响了氧产量及浓度.针对此问题,本文以HD-1型和PU-8型分子筛为原料,通过在不同温度(100、200、300、400℃)下活化得到不同含水量的分子筛,并通过对不同材料的结构形貌、热性能及吸附性能的表征分析了水分对分子筛结构及吸附性能的影响.研究结果表明:水分不会破坏分子筛的骨架结构,但会增大晶胞参数,并导致HD-1型分子筛中阳离子迁移;分子筛中的物理吸附水和化学结晶水会影响其吸附性能,其中物理吸附水的影响最大;活化有效提高了分子筛的吸附性能,且温度越高,含水量越少,吸附性能越好;在150~180℃下活化,将物理吸附水脱附后,分子筛的吸附能力可恢复70%,可在此温度下进行吸附器内低温活化;在400℃下活化,脱除化学结晶水,分子筛吸附性能可100%恢复,400℃为两种分子筛的最佳活化温度.     

RWM&DEWS数据二次压缩算法研究

对柑橘实时水分监控与旱情预警系统中的数据参数进行拟合分析,在探讨SDT和LZW 2种压缩算法的基础上,提出一种二次压缩算法:第1次压缩采用基于SDT算法思想的甲均值方法;第2次压缩采用改进的LZW算法实现.对压缩效果进行测试,仿真实验证明,在相同的硬件和软件环境下,该算法能实时、高效地压缩数据.     

基于S7-300／400PLC的冗余控制系统在变压吸附（PSA）制氢装置中的应用

本文介绍了分别基于西门子S7—300PLC和S7—400PLC的两种冗余控制系统在荆门石化和鞍钢变压吸附制氢装置中的应用。概述了工艺过程和工艺对控制系统的要求,着重对上述两套系统的硬件配置和软件编程组态实施方案进行了描述。运行结果表明,上述系统稳定可靠,控制效果良好,能满足工艺要求。     

Java 2基于自定义事件的动画标签和按钮的实现

在Java 2的Swing组件体系下，JLabel和JButton两个控件能显示动画CIF图片。本文则从自定义事件的角度出发，探讨了在AWT和Swing组件体系下实现这一过程的另一机制。     

基于Java的CBT--对CORBA的交互式介绍

介绍一个基于Ｊａｖａ的ＷｅｂＣＢＴ原型系统。论述了它的设计思想，实现技术以及目前已完成的工作。     

JAVA新类库中Swing的事件传送机制

ＳＵＮ公司最新发布的一套ＡＰＩ中的Ｓｗｉｎｇ组件集采用了ＭＶＣ结构，其中Ｍ、Ｖ、Ｃ三者间的事件传送及与外界的通信机制相当重要。本文从Ｓｗｉｎｇ的组件如何响应外部事件、如何处理自身的变化及如何把自身变化传递给外界三个方面详细阐述Ｓｗｉｎｇ的事件传送机制。     

Optimization of Improvable Flows by combining BAT Analysis and process simulation

This paper proposes a methodology to improve the sustainability of industrial processes combining two tools: BAT Analysis and process simulation. Both tools are jointly applied to identify the IF of the analyzed process, so that the most appropriate candidate techniques from an inventory can be selected. The selected alternatives are tested in different scenarios that are evaluated using simulation, which would determine the configuration that best improves the sustainability of the process. The combination of both tools in an integrated methodology will help decision makers to select the most sustainable configuration for a given process. The methodology is validated in a case study: a hydrogen production plant. After analysing several scenarios where different candidate techniques are implemented, results show that the IF identified can be highly improved when the appropriate combination of BAT is applied.     

RFID技术及其应用

介绍了RFID技术基本工作原理和组成部分,以及无线射频识别技术应用及电子标签原理的相关信息,并用Java语言开发了一个原型系统,说明如何通过RS-232端口实现对RFID阅读器MP9210 Reader的控制,使EPC标签内的信息与后台数据库关联完成业务处理。