点胶机离线编程软件的设计与开发

SMT设备要达到最大的产量，必须要考虑生产线的效率。点胶机是SMT生产线中的重要设备，因此提高点胶机的生产效率具有十分重要的意义。本文以CAMALOT 5000系统为例，介绍了点胶机离线编程软件的设计与开发中的思想、方法和经验，本文着重探讨了坐标数据的处理和转换，同时针对基于点胶系统优化的TSP问题进行了分析和研究，对程序优化进行了系统分析设计，并编程实现了基本方案。最后在CAMALOT 5000系统上使用本解决方案，大幅度提高了生产效率，证明了本解决方案的优越性和高效性，也为其他SMT设备的离线编程软件的设计提供了一种可参考的思路。     

基于群智能混合算法的物流配送路径研究

针对物流车辆路径优化问题,考虑到基本蚁群算法有收敛速度慢、易陷入局部最优的缺点,采用了一种双种群蚁群算法,在蚁群的基础上引入差分进化(DE)和粒子群算法(PSO)。通过在PSOAS种群和DEAS种群之间建立一种信息交流机制,使信息能够在两个种群中传递,以免某一方因错误的信息判断而陷入局部最优点。通过matlab仿真实验测试,表明该群智能混合算法可以较好地解决TSP的问题。     

Thrombospondin-1 CD47 Signalling: From Mechanisms to Medicine

Recent advances provide evidence that the cellular signalling pathway comprising the ligand-receptor duo of thrombospondin-1 (TSP1) and CD47 is involved in mediating a range of diseases affecting renal, vascular, and metabolic function, as well as cancer. In several instances, research has barely progressed past pre-clinical animal models of disease and early phase 1 clinical trials, while for cancers, anti-CD47 therapy has emerged from phase 2 clinical trials in humans as a crucial adjuvant therapeutic agent. This has important implications for interventions that seek to capitalize on targeting this pathway in diseases where TSP1 and/or CD47 play a role. Despite substantial progress made in our understanding of this pathway in malignant and cardiovascular disease, knowledge and translational gaps remain regarding the role of this pathway in kidney and metabolic diseases, limiting identification of putative drug targets and development of effective treatments. This review considers recent advances reported in the field of TSP1-CD47 signalling, focusing on several aspects including enzymatic production, receptor function, interacting partners, localization of signalling, matrix-cellular and cell-to-cell cross talk. The potential impact that these newly described mechanisms have on health, with a particular focus on renal and metabolic disease, is also discussed.     

重钙装置改产DAP的工程实践

介绍瓮福重钙装置采用混合工艺改产 DAP的技术改造及试车概况、试车中出现的问题及解决措施。     

A discussion of the methods for comparing the relative effectiveness of phosphate fertilizers varying in solubility

Because various phosphate (P) fertilizers differ widely in their solubility, it is commonly observed that crop response to P fertilizers varies under the same soil and crop conditions. Furthermore, a major problem encountered in the methods for determining the relative effectiveness (RE) of water-insoluble P fertilizer (e.g., phosphate rock) with respect to water-soluble P fertilizers, e.g., single superphosphate (SSP) and triple superphosphate (TSP), is that their growth response curves are usually nonlinear and often do not share a common maximum yield. In this paper, we review and discuss the advantages and disadvantages of the three most commonly used methods for calculating the RE of phosphate rock with respect to TSP (or SSP). The three methods are vertical comparison, horizontal (substitution rate) comparison, and linear-response comparison.     

重钙装置改产磷铵反应与尾气洗涤系统设备出现的问题

介绍瓮福磷肥厂重钙(TSP)装置改产DAP后,反应与尾气洗涤系统料浆泵、搅拌器、反应器、洗涤泵、重要阀门在运行中出现的问题及处理措施.     

Agronomic evaluation of fertilizer products derived from Sukulu Hills phosphate rock

Partial acidulation of phosphate rock (PR) or compaction of PR with soluble P fertilizers can improve the usefulness of unreactive PR for use as P fertilizer. A greenhouse study was conducted to evaluate nonconventional phosphate fertilizers derived from a low reactive Sukulu Hills PR from Uganda. Raw PR (which contained 341.0 g kg^–1 Fe₂O₃), beneficiated or concentrate PR, partially acidulated PR (PAPR) and PR compacted with triple superphosphate (TSP) were evaluated. Compacted materials had a P ratio of PR:TSP = 50:50. PAPR materials were made by 50% acidulation with H₂SO₄. TSP was used as a reference fertilizer. Fertilizers were applied to an acidic (pH = 5.4) Hiwassee loam (clayey, kaolinitic, thermic Rhodic Kanhapludults) at rates of 0, 50, 100, 200, 300 and 400 mg P kg^–1 soil. Two successive corn (Zea mays L.) crops were grown for 6 weeks. Compacted concentrate PR + TSP and raw PR + TSP were 94.4 and 89.7% as effective as TSP, respectively, in increasing dry-matter yields for the first corn crop. PAPR from the concentrate was 54.8% as effective as TSP. Raw PR, concentrate PR and the PAPR from the raw PR were ineffective in increasing dry-matter yields. The same trends were obtained when P uptake was used to compare effectiveness. Ineffectiveness of the raw PR and its corresponding PAPR was attributed to a high Fe₂O₃ content in the raw PR. Bray I and Pi paper were found to be nearly equally suitable at estimating available P in the soils treated with responsive fertilizer materials. Mehlich 1 overestimated available P in soil treated with raw PR, concentrate PR or the PAPR from the raw PR.     

求解TSP的改进遗传算法

遗传算法是求解旅行商问题的一种全局优化概率搜索算法方法.文中针对遗传算法较快的找到最优解并防止＂早熟＂收敛问题,提出了一种新的分级方法,该方法在各级中以群体当前最优个体替代各级中的最差个体,并在各级中采用自适应变异概率,改进后的遗传算法不但有效的维持了群体的多样性,而且提高了收敛速度.最后实验表明,改进的算法是可行和有效的.     

强化两相混合的超临界技术制备聚乳酸微粒

针对商品化聚乳酸微球粒径分布较宽难于适用气溶胶给药要求的不足,采用水力空化混合强化超临界流体辅助雾化技术(SAA-HCM)制备聚乳酸(PLA)超细微粒.该技术主要特点是通过在超临界流体和液相进料处引入水力空化混合器,强化两相间的混合.考察SAA-HCM过程混合器压力、温度、沉淀器温度、进料中CO2与液体溶液质量流量比和溶液质量浓度等操作参数对微粒形态和粒径分布的影响,成功制备出球形度较好,粒径分布较窄(1～3μm)的PLA微球.经X射线衍射(XRD)分析和差示扫描量热(DSC)分析显示,与原料PLA相比,微球晶型及热曲线变化不大,但结晶度下降.同时把操作参数与相行为进行关联,探讨了影响颗粒形貌的机理.对比超临界流体辅助雾化法(SAA)的实验结果表明:水力空化的引入能有效强化混合器内的两相传质,混合更好,能制备出适用于气溶胶给药要求的超细微粒.     

重钙混化工艺条件的优化试验研究

研究了磷矿粉和磷酸混合化成制重过磷酸钙的工艺条件 ,得出了最优的工艺条件 ,即在试验用磷矿和磷酸的前提下 ,混化最优工艺条件为 :①磷酸质量分数 (P2 O5) 45 % ,酸温 80～ 90℃ ,②磷酸质量分数 (P2 O5) 46% ,酸温 80℃ ,③磷酸质量分数 (P2 O5) 48% ,酸温 60℃ ,三者磷酸过量系数均为 10 0 % ,可获得一级品以上的重钙和87.2 2 %～ 95 .46%的磷矿分解率。其中磷酸质量分数临界值为 46%。