Freelance 2000 DCS在轴流机上的应用

简要介绍了Freelance 2000 DCS的功能特点以及轴流机的控制要求.结合轴流机的控制特点，用Freelance 2000 DCS对原模拟电子系统进行改造，实现并改进了轴流机流量－静叶位置调节、防喘振控制、逻辑控制、状态监测、信息管理等功能。改造后的系统可靠性高、技术先进、信息管理功能强，其设计思想和方法均可供石化企业大型压缩机控制系统的设计和改造借鉴。     

轴向进给比对薄壁管滚珠旋压影响的有限元分析

通过有限元数值模拟方法得出滚珠旋压中薄壁管在不同凹模旋转速度条件下轴向进给比的变化规律及工件的成形规律,并对模拟结果的等效应变分布做了分析,并与实验结果进行比较,给出薄壁管滚珠旋压时进给比的选取范围.结果表明,进给比对滚珠旋压中薄壁管直径的胀缩和工件的质量有着显著的影响.另外,从计算的模具所受的三向载荷变化情况分析了模具的使用寿命.     

屏蔽电泵运行中存在问题的分析与改进

对屏蔽电泵在非设计流量下工作存在较大的轴向力不平衡，造成前端轴承磨损严重进行了分析。在不降低效率的情况下，在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡，并取得了满意的效果。     

高温对冶金窑窑体的影响

针对冶金回转窑窑体在高温下产生的失效进行数值分析，并在此基础上对冶金窑窑体的设计方法进行修正。     

Prediction of axial velocity profiles and solids hold-up in a rotary kiln

Axial bed depth profiles were experimentally measured in a rotary kiln containing ilmenite particles under steady state and transient conditions. The variables include feed rate of solids, inclination and rotational speed of the kiln. and dam height. The variation of the axial velocity with kiln axis was estimated. The semi-experimental model proposed by Perron and Bui (1990) was modified to include the effect of the variables of the present study. The mean residence time of solids was estimated from the fractional hold-up and expressed in terms of the process variables. The transients induced by a step change in any of the operating conditions were measured as variation of discharge rate of solids with time.     

一种悬臂式钢管喷印装置及其控制系统

本文介绍了一种用于成品钢管生产线上的悬臂式钢管喷印装置，它是一台结构和功能都较复杂的大型机电一体化设备。文中简介了它的性能、特点和工作原理，对其各部分机械装置的构成及动作以及喷印控制系统的组成和功能进行了较为深入的描述。     

采用轴径向技术有效解决固定床反应器阻力降的快速升高

讨论了固定床反应器阻力降快速升高的原因，介绍了用轴径向技术解决这一问题的原理及优点，及其在铁铬系变换催化剂和钴钼系耐硫变换催化剂反应器中的实际应用。     

热收缩套管及其成型方法

本文介绍了热收缩套管的收缩机理及成型方法，如气压吹胀法、机械扩张法和缠绕法等。并对管材结构、原料及主要工艺技术简要地进行了比较和评价。     

Dynamic responses and damages of water-filled pre-pressurized metal tube impacted by mass

An account is given of some principal observations made from a series of experiments in which three-span pipe beams were subjected to central impact by indenters with different nose shapes. These pipes were filled and pre-pressurized with water in order to identify the main effects produced by the fluid–structure interaction. In comparison, the impact experiments of the pipes with no water were also carried out. The perforation failure modes and corresponding critical impact energies were obtained in different test conditions. The experimental results indicated that the critical perforation energy and the deformation of the wall of the pipe were significantly influenced by the presence of the water and the pressure.     

内复合换热管与复合管板焊接工艺试验研究

介绍复合管与复合管板的管头设计及其焊接试验,结果表明,如果管内壁不锈钢复合层的厚度达到或大于0.5mm,则管头的焊接质量能满足要求,否则管头焊缝容易开裂。内、外双面复合管和复合管板的管头焊接工艺,与仅有内壁单层不锈钢复合层的复合管和复合管板的管头焊接工艺相同。