Synthesis and performance evaluation of a new drag reducer based on acrylamide/12-allyloxydodecyl acid sodium

Hydraulic fracturing with slickwater is a field-proven stimulation technology used in tight reservoirs. Because of the high pumping rate associated with slickwater fracturing, drag reduction (DR) is critical in minimizing pressure drop and the success of oilfield operations. In this paper, a new type of drag reducer (SPR) was synthesized with acrylamide and 12-allyloxydodecyl acid sodium, and its drag reduction performance was evaluated. The results showed that the new drag reducer features low molecular weight, fast-dissolving rate and low interfacial tension. The algorithm of estimating the drag reduction rate of non-Newtonian fluid SPR was proposed and validated. Empirical or semianalytical models for estimating the friction ratio (σ) or friction factor (λ or f) were used to simulate the turbulence behavior of the SPR drag reducer under different Reynolds numbers (Re). The modified Virk's correlation could accurately model the turbulent behavior of the SPR drag reducer. A unified calculation formula was established in this study for different pipe diameters.     

Energy storage performance of 0.55Bi0.5Na0.5TiO3-0.45SrTiO3 ceramics doped with lanthanide elements (Ln = La,Nd, Dy,Sm) using a viscous polymer processing route

Lead-free bismuth sodium titanate-strontium titanate (NBT-ST) dielectric ceramic materials have been extensively investigated energy storage materials because of their relaxor characteristics. In this study, four different lanthanide elements were introduced into the ferroelectric NBT-ST ceramic to improve their relaxor properties. The introduction of the lanthanide resulted in an increase in disorder at location A within the perovskite lattice and improved relaxor characteristics, leading to a stored energy density of more than 3.5 J/cm³. In particular, an ultrahigh recoverable stored energy density of 4.94 J/cm³ and efficiency of 88.45% were achieved at 440 kV/cm when the NBT-ST ceramic was modified with neodymium. The modified ceramic also exhibited good thermal stability in the range of 30–120 °C, as well as a fast discharge time of ～153 ns, indicating that Nd-incorporated NBT-ST is a promising candidate for electrical energy storage ceramic.     

Drag coefficient of flow around a sphere: Matching asymptotically the wide trend

An empirical relationship of drag coefficient of flow around a sphere is developed for the entire range of Particle Reynolds numbers reported in the literature from Stokes regime to the condition when turbulent boundary layer prevails. The relationship is obtained using an approach to match asymptotically the wide trend of drag coefficient. The matching approach, which relies on dividing the wide trend into smaller segments that can be combined into an overall relationship, employs regression techniques and thus warrants the best-fit accuracy results. The relationship is calibrated with experimental data available in the literature covering the entire range for Reynolds numbers up to ~ 10⁶. For Reynolds values greater than 10⁶, the relationship renders a drag coefficient of 0.2. The performance of the relationship is tested and compared with other suitable models found in the literature. This relationship is also transformed into an explicit expression for settling velocity calculations.     

新型刮刀钻头的设计及现场试验研究

在理论分析的基础上，综合PDC钻头和刮刀钻头的优点，设计了一种新型的刮刀钻头，并进行了现场试验。现场试验结果表明，该钻头运转平稳，采用低钻压、高转速，钻进速度快，井眼规则通畅，有较明显的防斜作用，该种钻头的推广应用对提高钻井工程的整体效益具有十分重要的意义。     

多排数翅片管空冷器风阻特性的数值模拟

本文对多排数翅片管空冷器空气侧的风阻特性进行了数值模拟.利用商用软件Fluent进行数值计算,结合经验公式和已有的实验数据,分析了不同入口风速下,阻力的变化规律以及流动阻力和温度变化对模拟计算的影响.     

强化管理提高特超稠油开发效果

河南稠油资源品位低,开采难度大,效益差。近几年,通过实践,逐渐摸索出一套适应开发需要的科学生产管理方法,明显地改善了稠油开发效果。以提高热效率为核心,形成了八大生产管理制度;深化油藏认识,使油藏-工艺-管理三者有机结合,充分利用了地层储热,提高了周期吞吐开发水平;以降粘、防砂、堵窜为重点,实现了地面-井筒-油层三位一体工艺配套,保证了油井正常生产。     

一种新的位错运动理论及对材料动态力学行为的描述

通过对位错在晶格内运动的动力学过程的全面分析。本文提出了一种考虑到粘性阻尼效应和热激活的位错集体运动统一理论。其特点是可用一简单的方程对从低速到高速运动的大量位错的平均行为进行统一描述。对ＫＣｌ晶体的典型实验怕拟合发现理论描述与实验结果相当一致。     

机床电力拖动脉冲宽度调制技术的研究

本文重点介绍用于机床电力拖动系统中的电机脉冲调制(PWM)技术，在分析现有脉冲宽度调制技术的基础上，提出一种采用优化技术生成PWM调制波的方法，推导了优化PWM调制波的求解过程，给出了其计算公式。     

新型螺杆挤出机熔体输送理论的研究

介绍了一种新型嵌套式螺杆挤出机。对熔体输送段进行了深入分析，把内螺杆的运动等效为螺杆轴的反向拖曳和螺棱的正向推力置换两部分作用，建立了对应的物理模型和数学模型，并得到了解析解。重点讨论了沿螺槽方向的流动和横向流动，并与普通单螺杆挤出机作对比，得到了螺杆和机筒同时旋转情况下的体积流率。结果表明，所建模型的解析解和文献中的实验数据较为吻合，当螺杆和机筒同时旋转时，熔体输送段的体积流率大大增加，横向流动和平行平板模型类似。     

The influence of fluid elasticity on wall effects for creeping sphere motion in cylindrical tubes

Experimental results are presented of wall effect for the slow motion of spheres in elastic, constant-viscosity liquids. The results are correlated in terms of diameter ratio for d/D < 0.3, and Weissenberg number We < 5. Weissenberg number is defined as We = 2θV_m/d, with θ the Maxwellian relaxation time (θ = N₁/2τγ). The wall effect is found to be adequately described by Newtonian expressions for small Weissenberg number, We < 0.01. For larger values of the Weissenberg number, We > 0.2, virtually no wall effect is discernible; the small effect observed is correlated by the wall factor expression The wall effect observed is ascribed to the influence of fluid elasticity alone, since all the fluids used were elastic to a greater or lesser extent, but showed no shear thinning.