展成式精密电火花加工机床

研制了一种展成式精密电火花加工机床，它含有3个回转机构和4个直线移动机构，工件苡轴，工具电极苡轴和转台均可按需要回转，坐标工作台可作纵向和横向移动，工件头架可作轴向和竖向移动。可设置成多种复合运动方式和相应的结构布局，具有很丰富的加工功能，加工精度能达到微米级并实现电火花镜面加工。     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

高速线材生产的弹簧钢盘卷的表面脱碳分析

从金相角度对高线生产的弹簧钢盘卷的表面脱碳进行了分析，找出相关的影响因素，并针对实际情况提出了相应的改进方法。     

基于LabWindows/CVI的某型飞机FBW飞行试验台设计与实现

主要阐述了某型飞机EBW飞行试验台的LabWindows／CVI实现。在分析EBW组成及信号交联关系的基础上，设计了PCI总线结构的系统硬件；提出了测试库与测试引擎相结合的编程方法，并着重阐述了测试引擎的实现方法。     

Diffusion Bonded EDM Electrode with Micro Holes for Jetting Dielectric Liquid

This paper describes improvement of machining characteristics of electrical discharge machining of deep slots using a tool electrode which has micro holes for jetting dielectric liquid over the working surface. The tool electrode was made by the diffusion bonding of two copper plates, over an interface on which micro grooves for jetting the dielectric fluid were formed using electrolyte jet machining. In conventional machining, it is difficult to drill micro holes at the end of a slim electrode and circulate the dielectric fluid from the other end. Hence a solid tool electrode is used and periodically lifted up during machining to flush debris particles out of the discharge gap. Use of the newly developed tool electrode was found to shorten the processing time and improve machining accuracy significantly compared with the conventional solid tool electrode. Since the holes are micro, the outlet shapes are not replicated onto the bottom surface of the slot machined.     

玻璃与金属封接用杜美丝

利用ＡＥＳ、ＷＤＳ和ｘ－射线衍射等方法，研究了杜美丝表面层、铁镍芯与覆铜层界面的微观结构与特性。结果表明：良好的表面层应由Ｃｕ２Ｏ和非晶态的硼砂构成；玻璃与杜美丝的润湿性决定于表面层的净化程度和构成及加热条件。     

冷轧带肋钢筋在砼排水管中的应用研究

简述了冷轧带肋钢筋的生产工艺及性能。4种不同管径的砼排水管按等强度设计原则，以冷轧带助钢筋替代原用的冷拔低碳钢丝后，可节省钢材10％～31％，并提高砼排水管的裂缝荷载，破坏荷载等质量指标和安全度。     

A novel vision-based method for 3D profile extraction of wire harness in robotized assembly process

Automating stages for deformable objects in the production line, in which assembling a wire harness into a predefined position is a complex task owing to the specialized characteristics of the objects. Besides a few automatized systems proposed in the other studies to implement this task under simplified setup conditions, a significant portion of this process remains to be completed manually in industrial environments. To construct an automatic wire harness assembly system, the development of a method that can automatically detect the wire harness profile in a 3D environment and, consequently, guide robot arms to implement assembly tasks is indispensable. Therefore, this study presents an approach that satisfies this requirement, which not only proposes a deep learning-based system to detect the wire profile, but also improves the accuracy of the detected results through a correction method according to the depth values of contiguous areas. The verification of the approach in a robot system that highlights its usefulness and practicality demonstrates the potential of the proposed method to replace people and consequently, reduce labour costs in factory environments.     

LX—2型变频式喂线设备的研制及应用

根据炼钢生产的实际需要,分析了喂线技术的工艺要求,介绍了所研制的LX－2型变频式喂线机的结构特点,指出了影响喂线机使用效果的因素,并提出了若干措施。     

印刷线路板电镀废水综合治理

简述线路板电镀废水中氰、铜氨、油墨废水治理方法和混合废水综合治理工艺流程及原理。