气动锚杆钻机冲击频率测量仪的设计

针对气动锚杆钻机冲击频率不易测量的问题,提出了一种新型气动锚杆钻机冲击频率测量仪的设计方案。该测量仪采用压力传感器采集钻机冲击信号,采用电压比较器和单稳态触发器处理冲击信号并输入到单片机,由单片机计算出钻机冲击频率。实际应用表明,该测量仪可准确、方便地测量出钻机冲击频率。     

调节阀“三断”保位方案在焦化厂的应用

根据厂区所使用的调节阀自身具备的功能以及生产工艺需求,选择合适的（三断）保位方案,分析了所选择方案的工作原理及优、缺点及适用条件.     

The experimental research of a digital sampling signal converter

The sensitivity and rise time of a transient characteristic of a digital sampling signal converter are experimentally researched. The sampling converter is built at a clocked tunnel-diode comparator.     

基于MAX5494的电子测量供电系统电路设计

在传统的电子测量供电系统电路中,主要依靠人工来控制模拟电位器,这使其存在很多局限性。为了克服这些不足,利用单片机AT89C51来控制数字电位器MAX5494,实现了测量供电系统电路的自动调节和控制,不仅大大简化了电路,而且提高了系统可靠性,从而改进了传统的电子测量供电系统电路。     

基于分段电容阵列的改进型逐次逼近型ADC

为缩短高速模数转换器(ADC)中高位(MSB)电容建立时间以及减小功耗,提出了一种基于分段式电容阵列的改进型逐次逼近型(SAR)ADC结构,通过翻转小电容阵列代替翻转大电容阵列以产生高位数字码,并利用180 nm CMOS工艺实现和验证了此ADC结构。该结构一方面可以缩短产生高位数码字过程中的转换时间,提高量化速度;另一方面其可以延长大电容的稳定时间,减小参考电压的负载。通过缩小比较器输入对管的面积以减小寄生电容带来的误差,提升高位数字码的准确度。同时,利用一次性校准技术减小比较器的失配电压。最终,采用180 nm CMOS工艺实现该10 bit SAR ADC,以验证该改进型结构。结果表明,在1.8 V电源电压、780μW功耗、有电路噪声和电容失配情况下,该改进型SAR ADC得到了58.0 dB的信噪失真比(SNDR)。     

Simulation and computation of the asymmetry of a clocked balanced tunnel-diode comparator

By means of simulation and computation, a clocked balanced tunnel-diode comparator, in which the clock signal conditioner is also a tunnel diode, is studied. Simulation and computation of the tunnel-diode asymmetry required for obtaining a minimum offset of the zero level of the compensation voltage are carried out. Simulation of the clocked balanced comparator is performed by means of the Tanner T-Spice program.     

An Extended Comparator Hypothesis Account of Superconditioning.

Three conditioned taste aversion experiments with rats investigated superconditioning. In each experiment, alternate exposures of 2 flavor compounds with a common element (i.e., AB/AS) were administered to establish an inhibitory relationship between the 2 unique elements, B and S, and prior to testing, S was paired with lithium chloride (LiCl). In Experiment 1, pairings of a neutral cue (X) with S in compound with B after the AB/AS exposures resulted in superconditioning between X and S. Extinction of the common element (A) just before the S-LiCl pairing attenuated both the inhibitory relationship between B and S (Experiment 2) and superconditioning between X and S (Experiment 3). These observations suggest that superconditioning consists of enhanced performance rather than enhanced associative acquisition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Equipment for Checking High-Voltage Measuring Transformers

A method of checking measuring voltage transformers, based on the use of a combined high-voltage capacitive voltage divider and a current comparator as standard measuring instruments is considered. The method is used in the UPTN-35 equipment and enables it to be independently checked during use. __________ Translated from Izmeritel'naya Tekhnika No. 8, pp. 52–55, August, 2005.     

磁调制器的建模与仿真研究

基于MATLAB软件中的SIMULINK仿真环境建立了磁调制器的仿真模型,它可以精确模拟坡莫合金磁化曲线的饱和段,有效克服传统作图法的不足,能够快速分析包括激励线圈、直流偏磁线圈、检测线圈等的内阻在内的各种参数对调制性能的影响,有利于了解磁调制器工作机理,对于快速设计具有合理特性的磁调制器有指导意义。     

Method and Installation for Transferring the Unit of Flow Measurement from Standards to Working Measuring Instruments

A new, effective method is proposed for transferring the unit of flow measurement by using more comparators (flowmeters) simultaneously. A device for implementing the method is described and calculations are made for new, more accurate flow-measuring installations.