辐射型漏泄同轴电缆的设计

总结了漏泄同轴电缆的理论研究现状。围绕使用频带和耦合损耗这两个重要电气参数，讨论辐射型漏泄同轴电缆的设计方法。基于周期性槽孔结构的空间谐波的分析，讨论了抑制高次谐波以拓展使用频带的方法。利用时域有限差分方法和Matlab软件计算耦合损耗。     

光学系统中离轴性公差的计算机设计

运用不共轴光学系统的光路计算和象质评价理论，通过共轴光学系统中光学表面，光学元件，部件的小位移和微倾斜，对切比雪夫综合象质函数计算相应的有关限差分，以掌握各种离轴性误差对象质的危害程度，再按多元函数的极值理论和适应度性优化技术自动妥共轴光学系统中各种轴性公差，并进行反馈和非线性处理；达到公差的最优化分配。     

用搅拌式旋转粘度计测水泥生料浆的流变性能

为了消除在粗分散体系中应用圆筒式旋转粘度计所存在的壁效应和沉降效应，尝试将Ｂｒａｂｅｎｄｅｒ型搅拌式旋转粘度计应用于水泥生料浆系统的流变性能测试。对比试验表明：这种方法测定的数据较圆筒式旋转粘度计测定的数据重现性好，更为合理。     

A novel direct aerodynamically assisted threading methodology for generating biologically viable microthreads encapsulating living primary cells

In a recent discovery, coaxial electrospinning was explored to encapsulate living organisms within a continuous bio‐polymeric microthread from which active biological scaffolds were fabricated (Townsend‐Nicholson and Jayasinghe, Biomacromolecules 2006, 7, 3364). The cells were demonstrated to have gone through all expected cellular activity without their viability being compromised. These biologically active threads and scaffolds have direct and tremendous applicability from regenerative to therapeutic medicine. Currently these post‐processed cells as composite threads and scaffolds are being investigated in‐depth at a cellular level to establish if the processing methodology has any affect on the cellular make‐up. We now demonstrate a competing non‐electric field driven approach for fabricating composite threads and scaffolds influenced only by a differential pressure. We refer to this novel composite thread to scaffold fabrication methodology as coaxial aerodynamically assisted bio‐threading (CAABT). Our investigations firstly, demonstrate that this technique can process handle living organisms without biologically perturbing them in anyway. Secondly the process is elucidated as possessing the ability to form composite active threads from which biologically viable scaffolds are formed. Finally our study employs florescent activated cell sorting (FACScan), a method by which the cellular dynamics and viability are quantified on control and threaded cellular samples at two prescribed time points. In parallel with FACScan, optical comparison of cellular morphology at three time points within a period of three weeks is carried out to photographically observe any changes in the post‐processed cellular phenotype. Our developmental investigations into this novel aerodynamically assisted threading methodology has unearthed a unique biomicrofabrication approach, which joins cell electrospinning in the cell threading to scaffold fabrication endeavor. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Drag on two co-axial rigid spheres moving normal to a plane: Newtonian and Carreau fluids

The boundary effect and the presence of a nearby entity on the drag of a rigid entity is investigated by considering the movement of two identical, rigid, coaxial spheres normal to a plane in both a Newtonian and a Carreau fluid at a low to medium large Reynolds number. The parameters key to the phenomenon under consideration, including the nature of the fluid, the separation distance between two spheres, the distance between the near sphere and the plane, and the Reynolds number, on the drag coefficient are discussed. We show that the influence of a boundary on the drag coefficient is more important than that of the nature of a fluid and that of the separation distance between two spheres. The variation of the drag coefficient as a function of Reynolds number for a Carreau fluid is similar to that for a Newtonian fluid. Due to the shear-thinning nature of the former the drag coefficient in the former is smaller than that in the latter. The influence of the index parameter of a Carreau fluid becomes appreciable only if the Carreau number is sufficiently large. Correlations between the drag coefficient and the key parameters of a system are developed for the case when the Reynolds number is smaller than l.     

High power and low cross‐polarization microstrip patch array antenna at S‐band

This article reports the design and development of high power, low cross‐polarization, and high efficiency circularly polarized microstrip patch array antenna at S‐band, proposed for Indian Regional Navigation Satellite System payload. A novel feeding mechanism for truncated corner square patch based on square coaxial line for broadband impedance matching is discussed. Sequential rotation scheme for axial ratio improvement in an array is implemented. High power handling margins in critical regions of square coaxial line for multipaction breakdown is brought out. Measured 19 dB return loss bandwidth of array antenna is 15.6%. Axial ratio of 0.78 dB over global coverage is achieved in the desired frequency band of operation. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Coaxial Alginate Hydrogels: From Self-Assembled 3D Cellular Constructs to Long-Term Storage

Alginate as a versatile naturally occurring biomaterial has found widespread use in the biomedical field due to its unique features such as biocompatibility and biodegradability. The ability of its semipermeable hydrogels to provide a favourable microenvironment for clinically relevant cells made alginate encapsulation a leading technology for immunoisolation, 3D culture, cryopreservation as well as cell and drug delivery. The aim of this work is the evaluation of structural properties and swelling behaviour of the core-shell capsules for the encapsulation of multipotent stromal cells (MSCs), their 3D culture and cryopreservation using slow freezing. The cells were encapsulated in core-shell capsules using coaxial electrospraying, cultured for 35 days and cryopreserved. Cell viability, metabolic activity and cell–cell interactions were analysed. Cryopreservation of MSCs-laden core-shell capsules was performed according to parameters pre-selected on cell-free capsules. The results suggest that core-shell capsules produced from the low viscosity high-G alginate are superior to high-M ones in terms of stability during in vitro culture, as well as to solid beads in terms of promoting formation of viable self-assembled cellular structures and maintenance of MSCs functionality on a long-term basis. The application of 0.3 M sucrose demonstrated a beneficial effect on the integrity of capsules and viability of formed 3D cell assemblies, as compared to 10% dimethyl sulfoxide (DMSO) alone. The proposed workflow from the preparation of core-shell capsules with self-assembled cellular structures to the cryopreservation appears to be a promising strategy for their off-the-shelf availability.     

同轴电纺法TiO2/g-C3N4的制备及光催化性能研究

传统的静电纺丝法使用单一的毛细管状喷头喷丝,通常用于制备实心且表面光滑单一组分的纳米纤维,无法得到具有多种功能性结构的复合材料,应用范围较窄。以酞酸丁酯和尿素为原料,采用同轴静电纺丝法成功制备了TiO₂/g-C₃N₄复合材料,并用X射线衍射（XRD）、傅里叶变换红外光谱（FTIR）、紫外可见漫反射光谱（UV-vis DRS）、场发射扫描电子显微镜（SEM）和Brunauer-Emmett-Teller （BET）分析对样品进行了表征,通过光催化降解亚甲基蓝溶液（MB）研究了不同g-C₃N₄添加量对TiO₂/g-C₃N₄复合材料光催化性能的影响。实验结果表明,采用同轴静电纺丝法结合500℃煅烧工艺成功制备了大比表面积及高光催化性能的TiO₂/g-C₃N₄复合材料。当g-C₃N₄添加量为0.15 g时,TiO₂/g-C₃N₄复合材料对亚甲基蓝溶液（MB）的光催化降解效率可达93.8%,且经过5次重复实验后降解率仍可达80%以上。     

高速镗孔技术在压路机零件加工中的应用研究

针对深长孔加工的同轴度问题,通过分析高速调头镗的效率和加工精度,论述了调头镗孔工艺方法在压路机铰接架零件加工中的应用及高速加工的可行性.     

共轴双旋翼涵道风扇的气动特性研究

利用CFD软件对涵道风扇进行虚拟仿真,对共轴反桨双旋翼涵道风扇的空气特性进行分析。通过改变双旋翼的间距及飞行速度条件下仿真,对共轴反桨双旋翼涵道风扇气动特性的分析。结果表明,涵道距离对涵道扇有拉力有影响,但并不明显。在扰流的影响下,上桨盘产生的升力要小于下桨盘所产生的升力,并且涵道风扇不适合高速飞行。