大型连杆流线简易试验方法

介绍了一种大型连杆流线的简易试验方法及其评价原则。该方法可清晰显示流线，并适合任何尺寸和形状的锻造连杆的流线试验。     

GJB712A-2001航天用GH4169高温合金锻制圆饼规范介绍

介绍了GH 4 16 9高温合金锻制圆饼规范的修订内容 ,对其主要技术指标作了简要说明 ,并与国外同类标准进行了比较。     

就拉杆固定支架谈锻件的缺陷分析

针对汽车锻件拉杆固定支架在生产过程中产生的裂纹、折叠、表面脱碳等多种形式缺陷,从锻件生产工艺过程的各工序来分析其可能产生的缺陷,并重点就裂纹、折叠、表面脱碳等缺陷产生的原因及其解决方法进行探讨,从而进一步完善生产工艺,改善锻件质量.     

Upper-bound analysis of the pressure-assisted injection forging of thick-walled tubular components with hollow flanges

An upper-bound analysis of the pressure-assisted injection forging (PAIF) of thick-walled tubular components with hollow flanges was conducted to predict the maximum forming-pressure requirements. The polymeric pressurizing material and the pure aluminium work material employed were assumed to obey the von-Mises’ yield criterion, the two materials being divided into three and six zones, respectively, and described using kinematically admissible velocity fields. An upper-bound solution was derived based on this model. Experiments were conducted to validate the solution. The results suggest that the upper-bound analysis has sufficient accuracy for the prediction of the forming-pressure requirements. Subsequently, a parametric analysis was conducted to study the effects of variation of the principal parameters of the process and the geometry, such as tube thicknesses, flange dimensions and friction, on the forming-force requirements, which showed other useful applications of the upper-bound solutions.     

A new method of preform design in hot forging by using electric field theory

The preform design in metal forging plays a key role in improving product quality, such as ensuring defect-free property and proper metal flow. In industry, preforms are generally designed by the iterative trial-and-error approach. This approach, however, leads not only to the increase of significant tool cost but also to the extended down-time of the production equipment. It is thus necessary to reduce time and man power through an effective method of preform design. In this paper, the equi-potential lines designed in the electric field are introduced to find an appropriate preform shape. The equi-potential lines generated between two conductors of different voltages show similar trends for the minimum work paths between the undeformed shape and the deformed shape. Based on this similarity, the equi-potential lines obtained by the arrangement of the initial and final shapes are utilized for the design of the preform, and then the artificial neural network is used to find the range of initial volume and potential value of the electric field.     

提高Cr12MoV钢冷作模具寿命的措施

从原材料改锻、预备热处理、淬火及回火、深冷处理、表面强化处理等方面分析介绍了提高Cr12MoV钢冷作模具寿命的一些方法和措施 ,并通过实例表明 ,采用这些方法和措施可较大幅度地提高模具寿命     

管模工艺的优化

管模是生产离心球墨铸铁管的模具,其毛坯的锻造成型非常困难。本文介绍了管模锻造工艺的优化过程。采用优化后的工艺,解决了管模在锻造生产中出现的各种问题,使管模的成品率大幅提高。同时也为长筒型锻件的成型提供了可靠的参考依据。     

地锚拉杆整体抗拉强度损失分析

试验表明冷拔圆钢镶锻及热浸镀锌后整体抗拉强度有所下降，本文对这一现象进行了讨论，认为再结晶退火是其主要原因，在试验验证的基础上，提出了涂油镶锻的生产工艺。     

7175铝合金锻件毛坯高温均匀化处理工艺研究

对7175铝合金大型锻件生产过程中的关键工艺－－高温均匀化处理进行了研究；分析了锻造毛坯经过高温处理和未经高温处理的锻件的组织、性能差别及其机理。     

镁合金材料的应用及其加工技术的发展(1)

第一部分较全面地介绍镁及镁合金材料在交通运输、航空航天、电子工业、核能工业、化工、冶金等部门的应用方向与实例。第二部分简要地论述镁合金材料的加工技术，重点介绍镁合金新材料的研发、熔炼铸造工艺、压铸成型工艺、挤压技术、锻压技术与轧制技术的进展。指出镁合金是一种很有发展前景的新型金属材料，其加工技术将获得进一步的快速发展。