A probabilistic load shedding concept considering highly volatile local generation

Automatic load shedding is the ultimate countermeasure against imbalance in a power system and can effectively help preventing large blackouts. Taking into account a high penetration of renewable energy sources (RES) in the distribution grid, a clear distinction between load and generation at the PCC becomes increasingly more difficult. For that reason an adaptation of frequency relay parameters and their locations of installation are necessary. In Europe this is rest on a multi-step plan based on values such as the yearly peak load. In this paper a novel probabilistic method for automatic load shedding is presented that uses the average values instead of peak values for load shedding. Its applicability is verified by a dynamic power system model that was developed to compare the classical and novel probabilistic load shedding principle. The method is verified using data from a German TSO.     

The Person Reference Process in Spontaneous Trait Inferences.

Five studies examined whether spontaneous trait inferences uniquely reference the person who performed a trait-implying behavior. On each study trial in 5 studies, participants saw 2 faces and a behavioral sentence referring to one of them. Later, participants saw face-trait pairs and indicated whether they had seen the trait word in the sentence presented with the face. Participants falsely recognized implied traits more when these traits were paired with actors' faces than with control faces. This effect was replicated for a large set effaces (120), after a week delay between study and recognition test, when equal attention was paid to each face, and when the orientation of the face at recognition was different from the orientation at encoding. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An improved analysis of experimental data from 125 I hot-line autoradiographs: allowing for the effects of background grains

In this paper we suggest a new statistical method of correcting the results of hot-line experiments for the effects of background sources and we use the new method to reassess the adequacy of three probability distributions proposed in the literature for image spread from line sources. The data are from sources labelled with ¹²⁵I in semi-thin resin sections 0·4-0·8 μm in thickness. The new method reveals that two of the models describe the empirical distributions more closely than earlier analysis had suggested, and it confirms an increasing relationship between half distance of image spread and the thickness of the source. However, it also confirms that considerable ‘inter hot-line’ experimental variation remains, even after background correction. This suggests that multiple experiments are needed to produce reliable estimates of half distance.     

Carbon nanofibers as hydrogen adsorbing materials for power sources

Porous carbon nanofibers are synthesized by CVD method from acetylene with use of iron-containing catalysts. Activation of the nanofibers in melted potassium hydroxide results in increasing surface area from initial 300–400 m² g⁻¹ to 1700 m² g⁻¹. As follows from XRD data, activated nanofibers do not contain regular packages of graphene layers, but retain high electric conductivity. Deposition of copper improves electrochemical hydrogen storing characteristics of carbon nanofibers. Carbon nanomaterials obtained can be used as hydrogen storing materials in batteries instead of hydride forming metals.     

配网侧接入电源对负荷建模的影响

研究了配网侧接入电源对负荷建模的影响。发现当配网侧电源的发电容量逐渐增大时，原有的感应电动机并联恒阻抗、恒电流、恒功率（ZIP）模型的负荷模型将不再能很好地反映该区域的负荷特性，进而提出了一种新的负荷模型结构———异步发电机并联ZIP模型。通过仿真计算，验证了该新负荷模型的有效性，并进一步统一了上述2种负荷模型，称为异步机并联ZIP负荷模型。     

钴—60远距离治疗源的活度

本文简述了钴-60远距离治疗源的照射量率测量、活度计算及其误差分析。结果的合成不确定度分别小于±4%和±10%。同时,它适用于其它高活度钴-60密封源.     

Short-term power sources for tokamaks and other physical experiments

The Compass-D tokamak is being planned to move from UKAEA Culham (England) be and reinstalled in IPP Prague (Czech Republic). An overview of Compass-D energetics is described in short. The new power sources have to be designed. Alternative solutions of power sources have been investigated. Ignitrons and mechanical breakers can be replaced by modern high-power semiconductors. With respect to the need of accumulated energy, new technologies of energy storage - supercapacitors and high-speed flywheels, not applied up to now in similar fusion projects, are characterized in comparison with traditional ones - capacitors and big motor-flywheel generators. It is shown that these technologies enhance possibilities in arrangement of power supplies for tokamaks as well as for other high-power demanding experiments with pulse length from fraction to tens of seconds.     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

多污染源随机排污的水质影响分析方法及其应用

针对污水排放特征,将污染源分为连续排放型污染源和间隙排放型污染源。对连续排放型污染源,采用确定性方法定义污染源强;而对于间隙排放型污染源,运用不确定性理论,根据其排放污染源的随机统计特征,对污染源进行随机概化。将不确定性理论应用于多污染源随机排污对环境水体的水质影响分析,给出了基于不确定性理论的水质影响预测方法,建立了二维随机水质数学模型。并将该方法应用于某市水源地水质影响的随机分析,得到了在多污染源随机排放协同影响下水质浓度随机变化的统计特征。     

Parameter estimation using a sensor array in a Ricean fading channel

The estimation of the Direction-Of-Arrival (DOA) and the variance of the angular spread, using an array of sensors in the case of a Ricean channel is considered, using the Maximum-Likelihood, Least-Squares and Weighted Least Squares criteria. The Cramér-Rao bound is also obtained for the problem of interest. Simplification of the cost functions to reduce the dimension of the problem has been carried out and the performance of the methods has been studied based on numerical experiments. A major part of the work was carried out when K V S Hari was visiting the Department of Signals, Sensors and Systems during Jul–Sep 1995, on leave from the Indian Institute of Science