Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

补偿元件对载体催化元件输出特性的影响

阐述了矿井瓦斯传感器－载体催化元件在应用中，补偿元件发挥的作用和工作原理，着重分析了补偿元件对载体催化元件输出特性的影响，探讨了提高线性补偿效果的方法。     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

一种用于强振环境的转速传感器

该文介绍一种简单、可靠、小巧的转速传感器。它的特点是在强振环境下仍具有很高的可靠,可用于坦克底盘、重型工程机械,燃气轮机组等机械作为转速监测。     

A disposable sensor based on immobilization of acetylcholinesterase to multiwall carbon nanotube modified screen-printed electrode for determination of carbaryl

A simple method has been devised for immobilization of acetylcholinesterase (AChE) covalent bonding to a multiwall carbon nanotube (MWNT)-cross-linked cellulose acetate composite on a screen-printed carbon electrode (SPCE) and a sensitive and disposable amperometric sensor for rapid determination of carbaryl pesticide is proposed. The immobilized enzyme was preserved on this film because of the excellent biocompatibility and non-toxicity of cellulose acetate. Based on the inherent conductive properties of the MWNT, the immobilized AChE had greater affinity for ATCl and excellent catalytic effect in the hydrolysis of ATCl. MWNT improved the interface enzymatic hydrolysis reaction and increased the amperometric response of the sensor. Under optimum conditions, the inhibition of carbaryl on AChE increased linearly with the increasing concentration of carbaryl in two ranges, from 0.01 to 0.5 μg mL⁻¹ and from 2 to 20 μg mL⁻¹, with the correlation coefficients of 0.9985 and 0.9977, respectively. The detection limit was 0.004 μg mL⁻¹ taken as the concentration equivalent to 10% decrease in signal. The sensor showed acceptable stability, accuracy and could be fabricated in batches, thus it is economic and portable. This type of disposable enzyme-based amperometric sensor has extensive application potential in environmental monitoring of pesticides.     

低工作温度的氧化钨气敏材料

本文报道了一种可以在１００℃左右工作的氢化钨气敏材料，它对氢气和一氧化氮有很高的灵敏度和良好的选择性，并可对空气中的一氧化氮进行探测     

Dynamic analysis of the NPP pressure sensor system

The aim of the work was to develop on-line methods of control and diagnostics of pressure sensors at a NPP. The analysis was carried out along two lines:

1. i) The detection system including the sensor itself was modeled theoretically to obtain and study its transfer function, and to establish correspondence between the spectral characteristics of the pressure signal.

2. ii) The numerical processing of the signal using the AR technique to reconstruct the transfer function and evaluate the system's response, to a step impulse, as well as the spectral analysis. The hydraulic model presented indicate that the spectral lines observed at 10 Hz are due to longitu-dinal oscillations of water in the system branches, while the response time of the detection system is effectively the time of signal retardation in the porous ceramic diaphragms of the δ-cell of the sensor itself.

     

工业计量点无线监测系统

工业企业是我国能源消耗大户。为了加强工业企业的能源计量管理,保障工业企业节能降耗的基础工作,文章在分析了现有工业计量体系所存在的技术难点的基础上,提出将无线传感器网络技术应用于能源计量管理的实现方法,同时介绍了工业计量点无线监测系统的构成和优点。     

基于一种混合的节点定位算法的研究

针对基本的DV-Hop节点定位算法会产生不良的节点和多级跳带来的累积误差以及未知节点的坐标没有进行修正等缺点,提出了一种改进的混合节点定位算法WHDV-Hop算法,改进后的算法定位误差率明显比改进前的定位误差率小,通过MATLAB软件对节点定位误差方面进行仿真验证,仿真实验结果证明该改进后的算法稳定、可靠,易于实现。与DV-Hop算法相比,定位精确度提高了4.65%,计算量减少,降低了能量消耗水平,实现预期的目标。