不同折流板结构螺旋折流板换热器传热性能的比较(英文)

Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, two quadrant baffle schemes, and two continuous helical baffle schemes. The temperature contour or the pressure contour and velocity contour plots with superimposed velocity vectors on meridian, transverse and unfolded concentric hexagonal slices are presented to obtain a full angular view. For the six helix baffled heat exchangers, the different patterns of the single vortex secondary flow and the shortcut leakage flow were depicted as wel as the heat transfer properties were compared. The results show that the optimum scheme among the six configurations is a circumferential overlap trisection helix baffled heat exchanger with a baffle incline angle of 20° (20°TCO) scheme with an anti-shortcut baffle structure, which exhibits the second highest pressure dropΔpo, the highest overal heat transfer coefficient K, shel-side heat transfer coefficient ho and shel-side average comprehensive index ho/Δpo.     

叠盖电极技术在SPRITE 探测器上的应用

文中主要介绍了叠盖电极技术在SPRITE探测器上的实际应用，并给出了具体实验结果。选择适当的叠盖电极尺寸可以使SPRITE的响应率Rυ提高一倍以上，探测率D^*普遍提高30％左右，高的可达80％。实验结果表明，叠盖电极技术明显地提高了SPRITE器件的性能，是一种简便的提高SPRITE性能的新途径。     

Switching between tasks of unequal familiarity: The role of stimulus-attribute and response-set selection.

It has been reported that it is harder to switch to a strong, well-practiced task from a weaker, less-practiced task than vice versa. Three experiments replicated this surprising asymmetry and investigated how it is affected by a reduction in interference between tasks. Experiment 1 progressively delayed the onset of the stimulus attribute associated with the stronger task. Experiments 2 and 3 separated the response sets of the tasks. Both manipulations reduced, without eliminating, interference of the stronger with the weaker task but reversed the asymmetry of switch costs, resulting in a larger cost of switching to the weaker task. The results are interpreted in terms of a model of the interactions between control input, task strength, and task priming. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Rhizobium trifolii capsular polysaccharide: a novel biopolymer with striking physical properties

The physical properties of the capsular polysaccharide of Rhizobium Trifolii (CPS) were investigated. Viscosity measurements provided information about the hydrodynamic volume of single coils, the perturbation of solvent flow and the shear-thinning behaviour of concentrated solutions. Changes in chain geometry and the development of an intermolecular network as a function of temperature were monitored using the techniques of optical rotation and dynamic oscillation. Finally, analysis of calorimetric thermograms elucidated the type of interactions between CPS and the bacterial levan. Overall, the Rhizobium polysaccharide was found to form thermally-reversible gels at an extremely low 'minimum critical gelling concentration' (c_o∼ 0.35gl^-1). At temperatures above the gel melting point (∼ 48°C), however, the compact polymer coils entangled at comparatively high concentrations (about 60 times higher than c_o). In the presence of a highly branched levan, the thermal stability of ordered CPS structures increased as a consequence of thermodynamic incompatibility between the two polymers.     

最大重迭对称性分子轨道和分子几何参数计算

建立了AMl级别的最大重迭对称性分子轨道计算方案(MOSMO)。采用通常的半经验分子轨道方法AMl级别中完全相同的参数，计算了各种分子的几何参数等。所得计算结果与实验值及HF／6-31G*从头算方法计算结果相符，说明提出的计算方案是可行的。同时，由于提出的计算方案过程简单，更易推广使用到从头算方法难以解决的大分子体系和超分子体系的结构和性质研究。     

基于MODWT和BP神经网络的微电网故障诊断方法

近年来,随着微电网技术的持续发展,电力用户对其供电可靠性的要求也不断提高,因此微电网故障诊断研究也变得越来越重要。提出了一种基于极大重叠离散小波变换(MODWT)和反向传播(BP)神经网络的微电网故障诊断新方法,并通过仿真与算例进行了验证。结果表明:该方法能快速、准确地识别出故障类型,且不受故障初始相位角和过渡电阻等因素的影响;与现有的基于离散小波变换和反向传播神经网络的诊断方法相比所提出的方法可以提供更好的故障分类精度。     

Experimental Investigation of Epoxy Bonded Polymethylmethacrylate Joints

This paper presents an experimental investigation into various aspects of epoxy-bonded polymethylmethacrylate (PMMA) and PMMA-to-aluminium joints. The effects of adhesive thickness, overlap area, surface roughness, and environmental exposure on the joint strength were studied. Results indicated that the joint strength was not directly proportional to the overlap area, while sanding had a positive effect on the joint strength. A negative effect was observed when adhesive thickness was increased. The fatigue behaviour of adhesively-bonded joints under dynamic loading was found to be independent of frequency, for the range of values tested; however, it was dependent on the test temperature with greater reduction in fatigue life observed in PMMA-to-aluminium joints at higher temperature. Empirical equations from which the fatigue life of joints can be predicted were obtained by regression analysis. Intermittent fatigue testing of the joints was also performed. The epoxy adhesive tested proved to be a satisfactory choice for outdoor exposure. The rate of degradation of the adhesive was slow with the adherend itself degrading at a faster rate than the adhesive or the bondline.     

基于类内差异和类间重叠的有效性函数

模糊C-均值(FCM)聚类算法的一个主要问题是需要事先确定聚类的数目,为此定义了类内差异度和类间重叠度来分别度量同一个聚类中数据的相似度和不同聚类间的分离程度,进而基于这两个度量提出一个新的有效性函数用于判定最佳聚类数目。实验结果表明,该有效性函数能有效地判定聚类数目,并且有较好的鲁棒性。     

混合交通下右转机动车信号配时方法

为了减少右转机动车与直行自行车之间的干扰,提高交叉口的运行效率,本文分析了两相位信号控制交叉口右转机动车与自行车之间的冲突规律以及自行车交通流的行驶特性,确定设置右转机动车信号的直行自行车流量临界值.以减少冲突和提高交叉口运行效率为目标,确定右转机动车相位绿灯起亮时刻和绿灯时长,并建立了相应的参数标定模型.以实际调查数据为基础,应用VISSIM模拟软件进行模拟验证,结果表明,设置右转机动车信号后,右转机动车延误和机非冲突明显减少.     

立轧对中厚板断面形状的影响

基于中厚板在立轧轧边后板坯变形的物理模拟,分析了平辊立轧与倒棱轧制对中厚板断面形状的影响。平辊立轧可显著减小坯料侧面双鼓形及折叠,倒棱轧制可有效消除坯料侧面双鼓形。