Development and characterisation of a Y2Ti2O7-based glass-ceramic as a potential oxidation protective coating for titanium suboxide (TiOx)

A silica-based glass-ceramic, with Y₂Ti₂O₇ as the major crystalline phase, is designed, characterised and tested as an oxidation-protective coating for a titanium suboxide (TiO_x) thermoelectric material at temperatures of up to 600 °C. The optimised sinter-crystallisation treatment temperatures are found to be 1300 °C and 855 °C for a duration of 30 min, and this treatment leads to a glass-ceramic with cubic Y₂Ti₂O₇ and CaAl₂Si₂O₈ as crystalline phases. An increase of ~270 °C in the dilatometric softening temperature is observed after devitrification of the parent glass, thus further extending its working temperature range.Excellent adhesion of the glass-ceramic coating to the thermoelectric material is maintained after exposure to a temperature of 600 °C for 120 h under oxidising conditions, thus confirming the effectiveness of the T1 glass-ceramic in protecting the TiO_x material.     

施工中电焊机的安全使用简述

从电焊机自身电气特点及建筑工地工作环境入手,探讨电焊机安全技术的实施方法。分析电焊机安全隐患及事故的分类以及电焊机在使用过程中产生危险的原因。介绍电焊机在安装以及作业过程中的安全措施。     

Formation of a protective layer against corrosion on Mg alloy via alkali pretreatment followed by vanillic acid treatment

Although Mg alloy possesses high specific strength, low density, and good biocompatibility, poor corrosion resistance hinders its further applications. In the present study, an innovative protective layer against corrosion was prepared on the AZ31 Mg alloy via alkali pretreatment followed by vanillic acid treatment. The alkali pretreatment supplied –OH for the AZ31 Mg alloy surface to react with vanillic acid. The vanillic acid treatment played a crucial role in enhancing the corrosion resistance due to the excellent ability to act as a barrier and retard aqueous solution penetration, which effectively isolated the underlying Mg alloy from the corrosive environment. The corrosion current density of alkali and vanillic acid-treated Mg alloy (AZ31V) almost showed two orders of magnitude lower values in comparison with that of the AZ31 Mg alloy, and the corrosion potential of AZ31V Mg alloy increased from −1.41 to −1.25 V. The immersion tests proved that there was no occurrence of severe corrosion. Hence, the alkali pretreatment and vanillic acid treatment may represent a promising method to improve the corrosion resistance of Mg alloy.     

宝力格油田保护油层钻井液技术

钻井液作为与油层首先接触的外来流体极易对油层造成损害,做好钻井液保护油层工作在整个油层保护系统工程中非常重要.针对华北油田宝力格油田的储层物性,室内从岩心的敏感性评价入手,开展了钻井液保护油层技术的研究.通过对油层封堵技术的研究,研制出了适合于该油田储层特征的油层保护剂,结合现场钻井液施工的特点,制定了便于现场操作的保护油层施工措施.该技术自2002年开始,在二连地区宝力格油田共实施162口井.采取油层保护措施的井,完善井为86%,说明该钻井液技术在宝力格油田应用效果较好.     

洞庭湖流域某些水库,泉水和自然保护区环境水内的铀水平

一、前言 水库水,泉水,河水和大气降水等这些环境水与人类生活有着密切关系。水中天然放射性铀水平的研究因其化学毒性和放射性的双重危害是有实际意义的。洞庭湖流域处于我国亚热带湿润气候区,雨量充沛,矿产及水资源十分丰富。过去几年已对洞庭湖流域247000km~2湘、资、沅、澧各水系铀的水环境背景值,湘江的放射性水平和湘江流域大气降水中的痕量铀进行了研究。本文利用裂变径迹分析方法测定了洞庭湖流域的某些水库和泉水以及该     

Youth gambling behaviors: An examination of the role of resilience.

The study of resilient children has overturned many deficit-focused models concerning the ontogenesis of children raised in adversity. This study explored the relationship between risk and protective factors, resilience, and youth gambling behavior. More specifically, this study examined the relative contribution of various risk and protective domains in relation to problem gambling behavior and examined whether youth identified as resilient (high risk exposure- high internalized protection) were as likely as those identified as vulnerable (high risk exposure-low internalized protection) to engage in excessive gambling behavior. The sample consisted of 1,273 students ages 12 to 19. The findings demonstrated that risk and protective factors each provide a unique contribution to the prediction model of gambling problems. Resilient and vulnerable youth differed significantly in their self-reported gambling severity. As well, resilient youth were not statistically distinguishable from low-risk exposure groups in terms of their gambling severity. Findings are interpreted with respect to resilience and prevention research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

ETR Ⅱ-30调速器液压控制系统

ETRⅠ-30调速器是瑞士爱舍维斯工厂生产的具有PID调节规律的电液调速器。本文对其液压控制系统作了较详细的介绍,供有关人员参考。     

高温型Mo-Al2O3金属陶瓷的研制

将Mo与Al2O3粉体按摩尔比为0．3、0．4、0．5配料，混合均匀后通过粉末冶金法制成3种Mo-Al2O3金属陶瓷试样。在1800℃，2h氢气气氛中烧结后，试样的气孔率随Mo含量的增加呈降低趋势，而强度呈增加趋势。同时，随Mo含量增加，金属陶瓷中Al2O3的晶粒尺寸减小，Mo的形态从以弥散状为主转变为以连续状为主。研制的高温型Mo-Al2O3金属陶瓷测温套管（金属与陶瓷摩尔比为0．4）在真空或N2保护条件下测量高温合金熔液温度时，平均使用寿命达到100次。     

天铁热力厂4#锅炉电气自动化控制系统

介绍了热力厂4^#锅炉电气系统与微机联络控制的方式。系统分别采用变频器485接口式电动机保护测控单元或接触器与微机连接，实现4^#锅炉电气控制过程。     

埋地管道三层PE外覆盖层及其检测方法研究

文章介绍了埋地管道三层PE外覆盖层系统的构造参数和性能特点,论述了两种用于埋地钢质管道外覆盖层状况检测的方法,一种是多频管中电流法,另一种是DCVG/CIPS组合检测技术。分别介绍了两种方法的工作原理、操作方法和设备,并结合工程实例进行了说明。这些方法和设备可分别或同时用于管道不开挖检测防腐层破损点的位置以及漏点大小。