Stress-strain relations in elastoplastic solids with Dugdale-type cracks

Mechanical behavior of a two-dimensional elastoplastic solid with rectilinear cracks is investigated. Plastic strip model is used to reduce plasticity problem to the equivalent linear elasticity formulation. Two realizations of the mixed mode plastic strip model are considered: in-line plastic strips as proposed by Becker and Gross [Int. J. Fract. 37 (1988) 163], and inclined plastic strips of Panasyuk and Savruk [Appl. Mech. Rev. 47 (1994) 151]. The effective mechanical response predictions are based on the procedure presented in Kachanov et al., [Appl. Mech. Rev. 47 (1994) 151]. Stress-strain relations are obtained for parallel and randomly oriented non-interacting cracks. Results are compared with known elastic solutions.     

Network topology and the theory of rubber elasticity

The earliest investigations on rubber elasticity, commencing in the 19th century, were necessarily limited to phenomenological interpretations. The realisation that polymers consist of very long molecular chains. commencing c. 1930, gave impetus to the molecular theory of rubber elasticity (1932-). according to which the high deformability of an elastomer, and the elastic force generated by deformation, stem from the configurations accessible to long molecular chains. Theories of rubber elasticity put forward from 1934-1946 relied on the assumption that the junctions of the rubber network undergo displacements that are affine in macroscopic strain. The theory of James and Guth (1947) dispensed with this premise, and demonstrated instead that the mean positions of the junctions of a ‘phantom’ network consisting of Gaussian chains devoid of material properties are affine in the strain. The vital significance of the distinction between the actual distribution of chain vectors in a network and their distribution if the junctions would be fixed at their mean positions went unnoticed for nearly 30 years. Experimental investigations, commencing with the incisive work of Gee in 1946. revealed large departures from the relationship of stress to strain predicted by the theories cited. This discrepancy prompted extensive studies, theoretical and experimental, during succeeding years. Inquiry into the fundamentals of polymer networks, formed for example by interlinking very long polymer molecules, exposed the need to take account of network imperfections, typically consisting of chains attached at only one end to a network junction. Various means were advocated to make corrections for these imperfections. The cycle rank ζ of the network has been shown (1976) to be the fundamental measure of its connectivity, regardless of the junction functionality and pattern of imperfections. Often overlooked is the copious interpenetration of the chains comprising typical elastomeric networks. Theories that attempt to represent such networks on a lattice are incompatible with this universal feature. Moreover, the dense interpenetration of chains may limit the ability of junctions in real networks to accommodate the fluctuations envisaged in the theory of phantom networks. It was suggested in 1975 that departures from the form predicted for the elastic equation of state are due to constraints on the fluctuations of junctions whose effect diminishes with deformation and with dilation. Formulation of a self-consistent theory based on this suggestion required recognition of the non-affine connection between the chain vector distribution function and the macroscopic strain in a real network, which may partake of characteristics of a phantom network in some degree. Implementation of the idea was achieved through postulation of domains of constraint affecting the equilibrium distribution of fluctuations of network junctions from their mean positions. This led in due course to a theory that accounts for the relationship of stress to strain virtually throughout the ranges of strain accessible to measurement. The theory establishes connections between structure and elastic properties. This is achieved with utmost frugality in arbitrary parameters.     

Labor-Management Cooperation and Customer Satisfaction

The satisfaction that a customer has with the construction product and construction services provided by a contractor has a direct influence on the customer’s willingness to select that contractor for future work. Labor and management working together have the opportunity to influence customer satisfaction. Activities at the contractor/craft worker level, the contractor/local union level, and the contractor association/local union level have the greatest potential to influence customer satisfaction. A precisely defined plan incorporating labor-management activities targeted at specific satisfaction factors will have the greatest likelihood of creating high customer satisfaction.     

Construction Productivity Improvement

Construction productivity has been on the decline in the last decade. The results are presented on a survey of the Engineering News‐Record 400 largest contractors to obtain their views on where productivity improvements would most help and to compare the trends with a similar survey carried out in 1979. Data were collected on the general company characteristics of the responding contractors, and on the contractors' opinions on potential areas for productivity improvement in the office and in the field. Findings indicate that immediate research should concentrate on improving marketing practices, planning and scheduling, labor‐management relations, site supervision, industrialized building systems, equipment policy and engineering design; and that governmental regulations have lost the immediate urgency attached to them in 1979.It is also recommended that similar surveys be conducted every 3 to 4 years to identify new trends and to steer research in the appropriate direction.     

Control of structure and tack properties of acrylic pressure‐sensitive adhesives designed by a polymerization process

Free radical emulsion polymerization of methyl methacrylate (MMA) and 2‐ethylhexyl acrylate (EHA) results in the synthesis of pressure‐sensitive adhesives (PSAs) with good tack properties. Management of both the copolymer composition and the polymerization process allows one to control the behavior of the PSA. Semicontinuous (SC) processes create polymer particles whose instantaneous composition is close to that of the feed particle The SC Mixture process (continuous feeding with comonomer blends) affords nearly homogeneous latex particles and PSA films. The SC Gradient process (separate feedings at inversely varying rates) affords heterogeneous particles and films. The Batch process leads to somewhat heterogeneous films, but the hard (MMA‐rich) microdomains are made compatible with their soft (EHA‐rich) matrix because of the assumed formation of tapered‐type copolymers. Tack measurements indicate the importance of the particle and film structures. Too much hardness or softness leads to unacceptable lacks of adhesion and cohesion, respectively. Homogeneous structures prove adequate, but their tack properties collapse with rising temperature. Heterogeneous structures, with extensive phase segregation, prove unsatisfactory because they lack adhesion and cohesion. Finally, the association of well‐balanced composition and compatible heterogeneity is the criterion for suitable PSA behavior. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2749–2756, 2003     

Mixture of probability distributions as a basic component in simulating measurement accuracy

A stochastic model is proposed for a basic mechanism in the formation of uncertainties in physical quantity measurements. __________ Translated from Izmeritel'naya Tekhnika, No. 1, pp. 12–17, January, 2006.     

高沸石配比陶瓷纤维复合纸制备中助留剂的选择

考察了沸石复合纸板制备中助留剂对无机物留着的影响。结果表明,PDADMAC或A-PAM单元体系、PVAm/A-PAM二元助留体系的作用效果差,PDADMAC/A-PAM二元助留体系的留着效果显著,PDADMAC的相对分子质量对留着效果的影响不大,PDADMAC与A-PAM的电荷量比是决定无机物留着的主要因素,本研究的条件下,最佳正负电荷量比为3.0～5.0。     

Perverse Spite: The Possessive Gleam in the Mother's Eye and the Struggle to Own One's Soul: Reply to Stern (2004).

In this response to Jeffrey Stern's (2004) (see record 2004-21113-016) commentary on my article, "Giving the Devil His Due: Spite and the Struggle for Individual Dignity" (P. Shabad, 2000) (see record 2000-00917-004), I suggest that in emphasizing the conscious vindictiveness of explicit spite, Stern minimizes the perverse aspects of "cutting off one's nose to spite one's face" as a means of avenging oneself against powerful others. The underlying impetus of perverse spite is to break free from the prison of subtle developmental contingencies and unconscious seductions surrounding maternal possessiveness. When the child's self-assertive strivings are blocked because of the shame and fear of premature separateness, the inward obsessional churning of resentment becomes a fertile ground for perverse spite. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nonlinear Stress-Strain Relationship of Soil Reinforced with Flexible Geofibers

A nonlinear stress-strain relationship of soil reinforced with flexible geofibers under static loading is derived based on a nonlinear elastic stress-strain relationship of soil and a linear elastic stress-strain relationship of geofibers in the paper. This investigation includes the following aspects: First, the homogenization technique is introduced to find the volume average stress tensor and volume average strain tensor and further an elastic incremental stress-strain relation is introduced to describe deviatoric shear stress-axial strain relationship of equivalent homogeneous geofiber-reinforced soil. Second, the relation of geofiber numbers, content, mechanical behavior, distribution, and geometrical features to shear modulus of geofiber-reinforced soil is expressed and assessed by employing an elastic energy method. Third, the deviatoric shear stress and axial strain curves of geofiber-reinforced soil are calibrated by laboratory testing data of geofiber reinforced soil samples. Finally, the theoretical computational curves of geofiber reinforced soil are compared with the curves calibrated by testing data of geofiber reinforced soil. The model prediction has a good agreement with experimental results.     

企业内部公关与企业形象塑造

良好的企业形象是竞争取胜的利器，内部公关是塑造良好企业形象的根本手段。本文阐述了企业内部公关对塑造良好企业形象的重要意义，探讨了实施内部公关的主要途径。