影响煤层气开发效果的地质因素再认识

地质特征认识对煤层气开发效果起着重要作用。在资源特征相差不大的情况下,发现煤层气相邻井的产量差异仍较大。排除工程因素后,通过选取8类地质参数,细致比对了保德区块低产井与邻井的参数特征,筛查出其关键因素为煤层微幅构造与顶板封盖条件,其中以微幅构造为主。据此,重新认识并划分出区块新的次生褶皱背斜单元、向斜单元和斜坡单元,获得了不同次生褶皱构造单元的开发特征。结果表明,高、低产井分布与次生褶皱背斜、向斜相关性高达92%。其中:高产井主要分布在次生褶皱背斜变化较缓、呈隆起状的“平台”,且煤层顶板以泥岩、碳质泥岩为主,封盖性较好;低产井主要分布在次生褶皱向斜,同一井台各井开发效果差异表现为从向斜条带轴部—向斜条带内—向斜条带外的煤层气井平均单井产量不断增加,到向斜轴部的距离大于向斜曲率半径73.5%的范围为主力产气区,小于向斜曲率半径40.0%范围为产水主力区。这对煤层气新井部署、生产管理、开发调整等,具有一定的指导意义。     

CYLINDRICAL AND CONICAL FOLD GEOMETRIES IN THE CANTARELL STRUCTURE, SOUTHERN GULF OF MEXICO: IMPLICATIONS FOR HYDROCARBON EXPLORATION

The NW‐SE trending Cantarell structure in the Gulf of Campeche hosts the largest oilfield in Mexico. The oil occurs predominantly in latest Cretaceous – earliest Tertiary breccias with subsidiary reserves in Upper Jurassic (Oxfordian and Kimmeridgian) and Lower Cretaceous oolitic and partially dolomitized limestones, dolomites and shaly limestones. Cantarell has been interpreted both as a fold‐and‐thrust zone and as a dextral transpressional structure. Analysis of structure contours at 100m intervals, on the tops of the Tertiary breccia and the Kimmeridgian (Upper Jurassic) dolomite, indicates that the structure is an upright cylindrical fold with gently plunging conical terminations; there is also a conical portion in the central part of the structure. The axes of the central, NW and SE cones are subvertical. This geometry indicates that the two fold terminations and the central cone are aprons rather than points, with the NW and central cone axes intersecting the cylindrical fold axis at the point where the geometry switches from conical to cylindrical. The apical angle (i.e. the angle between the fold and cone axes) varies as follows: (i) in the NW cone, it is ～70° in the breccia and ～76° in the Kimmeridgian dolomite; (ii) in the central cone, it is ～77° in the breccia and ～73° in the Kimmeridgian dolomite; and (iii) in the SE cone, it is ～64° in the breccia and ～57° in the Kimmeridgian dolomite. This indicates that whereas the fold opens with depth in the NW cone, it tightens with depth in the central and SE cones. Assuming a parallel fold geometry, these apical angles indicate an increase in volume in the NW cone (i.e. larger hydrocarbon reservoirs), compared to the central and SE cones. Theoretical considerations indicate that the curvature increases dramatically towards the point of the cone. In the case of the Cantarell structure, the apices of the cones are located at the conical‐cylindrical fold junctions, where the highest curvature may have resulted in a higher degree of fracturing. The coincidence of maximum curvature and the intersection of the conical and cylindrical fold axes in the fold culminations with porous and permeable reservoir rocks may have made these locations favourable for the accumulation of hydrocarbons.     

最新水冷式全固态数字调幅600kW中波发射机

数字调幅制式是当前国际上较先进的调制技术，ＤＸ系列全固态数字调幅中波发射机的电声指标和工业效率都是很先进的，过去的ＤＸ大功率机采用风冷方式，本文介绍了最新水冷ＤＸ－６００发射机的设备情况和技术特点。     

Depressive symptoms erode self-esteem in severe mental illness: A three-wave, cross-lagged study.

Vulnerability, scar, and reciprocal-relations models of depressive symptoms and self-esteem were compared among people with severe mental illness (SMI; N=260) participating in a partnership-based intervention study. Assessments were conducted at baseline, midway through the intervention (after 4 months), and at termination (after 9 months). Cross-lagged, structural equation modeling analyses revealed that participants' baseline depressive symptoms predicted a decrease in self-esteem in the first 4 months but not in the subsequent 5 months of participation. Exploratory regression analyses indicated that improved social functioning buffered this deleterious effect of depressive symptoms. These findings, which are consistent with the scar model, highlight the fragile nature of the self and the importance of social functioning in recovery from SMI. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

针对语音变换的语音篡改检测

针对使用语音变换技术的语音篡改,提出一种自动检测方法。在分析语音变换基本模型和变换语音失真的基础上,提取语音信号的声道参数以及相关的信号统计量,并通过支持向量机递归特征消除法,选择出对语音变换比较敏感的特征作为分类特征,使用支持向量机进行语音变换检测和变换语音的说话人性别判别。对于一种语音变换软件的实验结果表明,该方法具有较高的检测准确率,其中语音变换检测的平均准确率为94.90%,变换语音的说话人性别判别平均准确率为92.09%。     

整形美容外科用新材料—─瘢痕软化用硅胶纱布膜

本文研究了硅胶纱布膜的制备方法和治疗效果。在增生性瘢痕的治疗中，硅凝胶能较快地软化和减轻瘢痕，其治疗时间要比加压疗法短。目前，对硅凝胶的作用机理尚未完全明了，但一般认为水化和封闭是治疗作用的主要基础     

Effects of real‐time visual feedback on pre‐service teachers' singing

This pilot study focuses on the use real‐time visual feedback technology (VFT) in vocal training. The empirical research has two aims: to ascertain the effectiveness of the real‐time visual feedback software ‘Sing & See’ in the vocal training of pre‐service music teachers and the teachers' perspective on their experience with VFT. Forty participants from an undergraduate music teacher education programme were randomly assigned to three groups. The first two groups were assigned the teacher and student versions of Sing & See, respectively, and the third group served as a control group without access to the software. The experimental groups were given 12 weeks to use the software for vocal training on a self‐regulated basis. The technique of complex selections (TCS) was designed to assess the pitch accuracy and richness of vocal timbre. Pre‐ and post‐test singing tasks showed that the participants from the experimental groups significantly improved their vocal timbre. A questionnaire survey conducted after the training period found that most of the participants in the experimental s were positive about the effectiveness of VFT software in vocal training. As future leaders in the implementation of music education technology, pre‐service music teachers expressed a positive attitude towards the use of VFT as a technology‐enhanced learning (TEL) component in music education.     

高职院校非音乐专业声乐教学方法新探

针对高职院校非音乐专业学生的声乐教学应该采取与传统声乐教学不同的教学方法,让学生既掌握了一定的演唱技能又感受到美,同时又经历了愉快而轻松的学习过程。通过掌握歌唱的基本原则;咬字、吐字训练要点的处理;在歌唱中对歌曲进行艺术处理等方法,取得事半功倍的效果,实践证明这是高职院校素质教育声乐课程教学中的成功经验。     

针对构音异常辅助治疗的声道仿真研究

针对构音异常,本文提出了使用声道仿真来实现辅助治疗的方法。基于声道是一个弯曲的、三维的具有慢时变特性的声学管道,并且在声道中的声波传播是平面波的特性,可以把声道等效于一个具有不同截面的圆柱体或者椭圆体管道。使用极点形式,在牛顿插值的基础上得到共振峰。对声道进行了60段分段,通过经验公式得到声道在不同部位的面积。定义了描述声道特性的9个参数,进而对这9个参数使用Corana算法进行优化。使用辐射模型描述声音从嘴唇辐射出去以后的特性。最后进行声音的合成,这个声音可用于反馈治疗。经过实验证明,这种声道仿真模型可以为制定合适治疗方法提供参考。