Mean residence time of gas in mechanically agitated gas–liquid contactors

In the present study of gas–liquid contactors, mean residence/contact time was calculated from knowledge of superficial velocity and the gas phase hold-up, for various gas rates and impeller geometry and speeds, and compared with values obtained from RTD measurements. A new correlation, involving Flow Number, Froude Number, system geometry and the physical properties, is proposed. This uses the authors data and those available in literature.     

CFD Prediction of Flow and Homogenization in a Stirred Vessel: Part I Vessel with One and Two Impellers

A simulation of flow field and tracer homogenization was performed using the commercial CFD software FLUENT 6.1. The aim is to investigate the potential of CFD software to predict concentration distribution of added tracer in cylindrical vessels. The calculated results – dimensionless velocity profiles, power and pumping numbers, dimensionless concentration curves, and mixing times – were compared with experiments in stirred vessels. In Part I, the study was performed for vessels agitated by one or two impellers on a centric shaft. Two different impellers were used – a 6‐bladed 45° pitched blade turbine and a standard Rushton turbine. The standard k‐? turbulence model and multiple reference frames method were used for the simulations. The influence of the grid type was also investigated; three types of grid – a structured, unstructured and a special user‐defined grid – were studied.     

反渗透膜仓用韧性环氧树脂基体研究

工业上广泛使用反渗透膜仓制备高纯水,为了用玻璃钢替代不锈钢,研究了一种适合湿法缠绕的反渗透膜仓用韧性环氧基体。在配方中采用液体酸酐固化剂甲基四氢邻苯二甲酸酐和高效活性增韧剂,对树脂基体和复合材料力学性能及耐水性能的研究表明该树脂基体具有许多优良性能,如拉伸强度≥86.2MPa,断裂延伸率≥5.2%,弯曲强度≥139MPa,制得膜仓爆破时纤维强度转化率高达88.7%,耐疲劳达10万次而无损伤。此外,配方体系室温下粘度为0.35～0.4Pa·s,适用期≥8h,室温下在水中浸泡180d后吸水率低于0.5%,同不锈钢相比成本降低1/2。实验结果表明,该韧性环氧基体完全适用于反渗透膜仓使用。     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

新一代高强韧性WDL系列钢综合性能及应用

本文着重介绍武汉钢铁公司近年来研制开发的第二代高强度低合金钢—高强韧性WDL系列钢的综合性能及应用情况。该钢具有优异的焊接性能和低温韧性,板厚≤50mm钢板焊前不预热或稍加预热而不产生焊接裂纹,是制造大型压力容器（特别是低温和常温球罐）、水电站压力钢管和水轮机蜗壳、高寒地区使用的大型工程机械、大跨度桥梁及海上采油平台等装备的理想用材。     

Lifetime and ageing management of nuclear power plants: A brief overview of some light water reactor component ageing degradation problems and ways of mitigation

The susceptibility and tendency for nuclear power plant (NPP) components to undergo changes in their mechanical and physical properties in the course of the NPP lifetime is generally termed as “ageing”. The light water reactor (LWR) nuclear environment is not a begnign one; it is characterized not only by fast neutrons, which can degrade metallic structures, but also relatively high temperatures of coolant water (around 300°C) which may contain impurities (e.g. sulphate, chloride, peroxides) which can cause corrosion. The hydrodynamical conditions of the coolant in steam generators, for example, can cause thermal fatigue, erosion and corrosion; suspended particulate matter can accelerate erosion processes which can lead to wall thinning and lowering of safety margins. Ageing is, therefore, a very complex mixture of factors concerned with materials, temperatures, times of exposure to environments which vary with time and with respect to chemical composition and flow charactertistics.

The paper describes a few ageing phenomena which can be considered important due to their impact on nuclear safety issues; their influence on economic aspects (availability) of NPP is outlined. Mitigation measures for NPP component ageing problems are given together with recommendations for addressing such issues in NPP now and in the future.     

Distinct Expression Patterns of Cxcl12 in Mesenchymal Stem Cell Niches of Intact and Injured Rodent Teeth

Specific stem cell populations within dental mesenchymal tissues guarantee tooth homeostasis and regeneration throughout life. The decision between renewal and differentiation of stem cells is greatly influenced by interactions with stromal cells and extracellular matrix molecules that form the tissue specific stem cell niches. The Cxcl12 chemokine is a general marker of stromal cells and plays fundamental roles in the maintenance, mobilization and migration of stem cells. The aim of this study was to exploit Cxcl12-GFP transgenic mice to study the expression patterns of Cxcl12 in putative dental niches of intact and injured teeth. We showed that endothelial and stromal cells expressed Cxcl12 in the dental pulp tissue of both intact molars and incisors. Isolated non-endothelial Cxcl12⁺ dental pulp cells cultured in different conditions in vitro exhibited expression of both adipogenic and osteogenic markers, thus suggesting that these cells possess multipotent fates. Taken together, our results show that Cxcl12 is widely expressed in intact and injured teeth and highlight its importance as a key component of the various dental mesenchymal stem cell niches.     

冠脉造影图像血管增强及减影的优化方法

针对于传统X射线冠状动脉造影序列图像的血管的减影包含严重伪影以及减影结果不完整等问题,提出了冠脉造影图像血管增强以及减影优化的方法。基于冠脉造影序列图像的时空特性,将相同时相的图像匹配进行减影,得到初步减影结果。针对初步减影部分缺失,对有导管遮挡没有被识别的单根血管进行二次增强处理。增强方法为:运用区域生长确定被导管遮挡的血管部分,以此部分为基础按规定模板扩展,形成覆盖导管区域,区分血管和导管,改变两部分的灰度值,增大对比度。最后采用灰度线性变换、中值滤波等步骤,得到优化的冠脉血管减影。实验表明,本减影及优化方法可以从冠脉造影序列图中提取较为完整清晰的冠脉血管并且具有很好的可控性和鲁棒性。     

炉外精炼用耐火材料提高寿命的途径及其发展动向

结合VOD与RH介绍了造成炉外精炼蚀损严重部位的原因。从MgO-Cr2O3、MgO-CaO、MgO-C、MgO-CaO-C、MgO-MgO·Al2O3等耐火材料性能及在精炼中的作用介绍了如何选择耐火材质;从接触角、熔渣粘度、形成高熔点化合物、气孔微细化以及炉渣成分控制、双饱和与精炼温度等方面介绍了提高炉外精炼用耐火材料寿命的途径。最后结合镁铬、镁钙、MgO-C、镁钙碳与无铬耐火材料介绍了炉外精炼用耐火材料的发展动向,并对MgAlON结合镁质耐火材料在炉外精炼中的研究与应用进行了评估与预期。     

D级压力容器制造许可证鉴定评审中企业存在问题综述

阐述了在D级压力容器制造许可证取换证鉴定评审过程中,取换证制造企业存在的较为普遍的问题。