伊朗德黑兰地铁轨道施工方法

依托伊朗德黑兰地铁一、二号线工程 ,针对地铁单洞单线采用的轨道施工轨排法存在的不足 ,根据单洞双线隧道的特点 ,提出了利用组装好的轨排直接铺设在隧道结构底板上作为轨道平板车临时轨道的施工新方法     

SHAPE GENERALIZED ISOTHERMAL EFFECTIVENESS FACTOR FOR FIRST-ORDER KINETICS

A generalized effectiveness factor equation (Eq. (32)), in terms of modified Bessel functions, is derived for a catalyst pellet of arbitrary shape. The derivation is based on utilizing an appropriate one-dimensional approximation for the Laplacian in an arbitrary shaped body subjected to a uniform external concentration field. The comparison of the result with the available expressions for various geometries is highly satisfactory. It unifies the expressions for the three fundamental shapes, viz., infinite slab, infinite cylinder and sphere, and also compares very well with the exact solutions for finite shapes over the entire range of the Thiele modulus.     

黄河黑山峡河段大柳树水库比小观音水库原始库容多40亿m3的作用

一级开发大柳树高坝原始库容比二级开发小观音高坝多 4 0亿m3 ,库容大带来的好处体现在 5～ 7月可多向下游增供水量 ,缓解下游河道断流 ;延长泄放清水时间 ;增加发电效益 ;满足宁蒙河段防凌要求 ;增加汛期集中泄水 ,减缓下游河道淤积萎缩 ;满足南水北调西线工程水量调节要求等。为了更好优化配置黄河水资源 ,从全局和长远利益考虑 ,应采用一级开发方案 ,修建大柳树高坝大库     

Modelling and analysis of 3-D arrangements of particles by point processes with examples of application to biological data obtained by confocal scanning light microscopy

Within the concept of point processes, a review is presented of quantities which can be used in studies of three-dimensional (3-D) aggregates of particles. Suitable characteristics and estimators are given for both unmarked and marked point processes. To demonstrate the feasibility of such quantitative approaches, an application in histology, dealing with 3-D arrangements of cell nuclei in rat liver, is described. Using a confocal scanning light microscope, 3-D images are recorded and image analysis used to obtain the coordinates of the centroid, together with the volume and DNA content, of each cell nucleus. Examples of results are given, using both unmarked and marked point processes. In the latter case, cell type, nuclear volume and ploidy group are suitable marks.     

Efficient and accurate approach for powder compaction problems

 In this paper, a new approach for powder cold compaction simulations is presented. A density-dependent plastic model within the framework of finite strain multiplicative hyperelastoplasticity is used to describe the highly nonlinear material behaviour; the Coulomb dry friction model is used to capture friction effects at die-powder contact; and an Arbitrary Lagrangian–Eulerian (ALE) formulation is used to avoid the (usual) excessive distortion of Lagrangian meshes caused by large mass fluxes. Several representative examples, involving structured and unstructured meshes are simulated. The results obtained agree with the experimental data and other numerical results reported in the literature. It is shown that, contrary to other Lagrangian and adaptive h-remeshing approaches recently reported for this type of problems, the present approach verifies the mass conservation principle with very low relative errors (less than 1% in all ALE examples and exactly in the pure Lagrangian examples). Moreover, thanks to the use of an ALE formulation and in contrast with other simulations, the presented density distributions do not present spurious oscillations. Received: 20 March 2002 / Accepted: 15 October 2002 The partial financial support of the Ministerio de Ciencia y Tecnología (grant number DPI 2001-2204) is gratefully acknowledged.     

Schubspannungsbomben in Faserverbunden

Shear Bombs in Fibre Composites Despite an optimum external shape non‐load adapted internal fibre orientation can lead to the formation of shear cracks where crossing tension‐compression principal stress trajectories create localized shear peaks. Trees are subject to those failure because they cannot re‐arrange their fibres after wood formation. Bones can adjust their micro‐structure to changing load conditions and in this way can better control shear failure. The engineer working with fibre composites should be alert to avoid fibre arrangements not following the force flow. Localized shear zones may also form near notches similar to normal notch stresses, however they are not always situated at the contour line of the notch.     

五强溪水电站缆索起重机的安装与使用

五强溪水电站主体工程混凝土浇筑垂直运输在大坝两岸分高、低层布置４台平移式２０ｔ缆索起重机。其中２台高缆从德国引进，属世界上首次采用全遥控的缆机，同时也是国内塔架最高的缆机；２台低缆属我国目前自行设计制造安装的规格最大、速度最高的缆机。     

影响凹印铜金粉印金光泽度的主要因素

在研究国内外铜金粉的微观形貌、厚度、水面遮盖率、定向排列、光泽度和粒度分布的基础上，分析了影响凹印铜金粉印金光泽度的主要因素。结果表明，国产铜金粉颗粒级差大、细小颗粒所占比例过多、金属片太厚、水面遮盖率小、定向排列不好等是影响国产铜金粉印金光泽度的主要因素。     

深入贯彻十六大精神加速企业创新体系建设为全面实现"十五"目标而奋斗

总结了2001年以来冶金集团总公司的科技质量工作,指出了存在的主要问题,布署安排了今后两年的科技工作。     

大坝安全监测自动化工程施工组织设计

结合建设项目进度及质量控制理论,从施工方案、进度计划、施工组织及劳动力计划、材料及施工设备、质量保证及安全生产等方面论述了大坝安全监测自动化系统工程的施工组织设计,对提高系统的可靠性、缩短工期、节约投资具有一定的现实意义.