The effect of pre-wetting on dynamic contact angles

A roll-coating experimental system is used to study the effect of pre-wetting on dynamic contact angles, the interfacial displacement depth, and the associated phenomenon of air entrainment. The system consists of a roll, which is horizontally rotating in a liquid pool. The dynamic contact angle is recorded by a macrophotography system. The test liquids are glycerol solutions with viscosities in the range 104 < μ < 748 mPa · s. The value of (μV/ρg)^0.5 is taken as the characteristic length to be used in the dimensionless relationships which correlate experimental measurements. The effect of base layer entry angle into the liquid pool on the dynamic contact angles and other flow parameters is studied. Comparison is made with measurements in dry tape-coating and other pre-wet roll–coating systems.     

Adhesive Contact of a Membrane with a Hemispherical Indenter: Theoretical Analysis and Model Liquid System

The axisymmetric Laplace equation is solved numerically to extract contact-angle data for a flat liquid/vapor interface contacting a submerged hemispherical solid. The liquid/vapor interface is treated as a membrane, with a membrane tension equal to the surface energy of the liquid. By measuring the vertical displacement of the membrane and the projected contact area the membrane makes with the hemisphere, the contact angle and correspondingly the driving force for motion of the contact line can be measured. We show that characteristic receding and advancing contact angles can be obtained by measuring the contact radii formed upon initial contact between the interface and hemisphere and final contact just prior to detachment of the interface, respectively. Use of the technique is illustrated with a model experiment involving the contact of an air/water interface with a poly(methyl methacrylate) surface.     

Analyses and Solutions of Specific Cases in Spatial Angles Calculation

1 Introduction “Spatial Angles Calculations” means that all the calculations of given and unknown parameters are related to calculating angles in 3D space. The functions and relevant parameters in 3D space are much more complicated than that in 2D space, i.e. on a plane. Professor Sun, based on his research conducting for more than a decade, presented a series of new algorithms to calculate angles in space which are valuable in both theory and applications[1]. The authors found that, in g…     

Experimental study of composite cold-formed steel C-section floor joists

Twelve large-scale slab specimens and twenty-two companion push-out specimens were tested to study the behavior and capacity of composite slab joists consisting of cold-formed steel C-sections and concrete. Four shear transfer mechanisms, including surface bond, pre-fabricated bent-up tabs, pre-drilled holes, and self-drilling screws, were employed on the surface of the flange embedded in the concrete to provide shear transfer capacity. Results indicated that specimens employed with shear transfer enhancements showed a marked increase in strength and reduced deflection compared with those relying only on a natural bond between steel and concrete to resist shear. Of the three shear transfer enhancements investigated, bent-up tabs provided the best performance at both the strength and serviceability limit states, followed by drilled holes in the embedded flanges. The use of self-drilling screws resulted in the lowest strength increase. The correlation of shear transfer capacity of push-out specimens with the ultimate capacity of large-scale specimens indicated that the average experimental flexural capacity of the slab specimens was approximately 1.16 times the average predicted value based on push-out test results.     

电容比和方向性对自给能γ剂量计探头的影响

本文给出了自给能γ剂量计探头在γ射线照射下积累电荷的测量结果，讨论了电容比和方向性对自给能γ剂量计探头的影响以及探头的饱和点。     

A new formulation for web crippling strength of cold-formed steel sheeting using genetic programming

This study presents Genetic programming (GP) as a new tool for the formulation of web crippling strength of cold-formed steel decks for various loading cases. There is no well established analytical solution of the problem due to complex plastic behaviour. The objective of this study is to provide an alternative robust formulation to related design codes and to verify the robustness of GP for the formulation of such structural engineering problems. The training and testing patterns of the proposed GP formulation are based on well established experimental results from the literature. The GP based formulation results are compared with experimental results and current design codes and found to be more accurate.     

Influence of the pH of Water on its Electron-Accepticity and Donicity

By means of contact angle measurements on dry layers of electrostatically neutral dextran with pure water (pH 6.1), water acidified with HCl (to pH 1.94) and water made alkaline with NaOH (to pH 12.8), it could be shown that there was essentially no change as a function of pH in the ratio of γ⁺/γ^- of water as compared with the aqueous acid and alkaline solutions. (Here γ⁺ is the Lewis acid parameter of the polar surface tension component of water and γ^- is its Lewis base parameter). In contrast, with contact angles measured with the same liquids on negatively charged clean glass, a significant decrease in contact angle was observed with water at pH 12.8, which was caused by the fact that at this alkaline pH an increase in surface hydrophilicity took place. This is because surfaces that have a given surface electrical potential at neutral pH generally acquire an even higher surface potential under more alkaline conditions which, concomitantly, also gives rise to an increase in surface hydrophilicity, and thus to lower contact angles with water. Finally, contact angles with acid water, pure water, and alkaline water, deposited on hydrophobic Parafilm surfaces, were exactly the same.     

Effect of surface free energy of ceramic glaze on oil droplet shape and its behavior in water

A super-hydrophilic functional ceramic was prepared by adjusting the chemical components of ceramic glaze. Effect of surface flee energy of ceramic glaze on oil droplet shape and its behavior in water were studied. The results show that water can spread on ceramic surface with high surface free energy, and oil droplet can aggregate rapidly and separate from the ceramic surface in water. For the ceramic with lower surface free energy, the polar shares are dependant on its easy-cleaning property. The higher the polar shares, the better the easy-cleaning property, and the easier the droplet separates from the ceramic surface in water.     

基于双距离像的空间目标多姿态角特征融合识别算法

介绍一种有效的空间目标电磁特征提取与识别方法.首先通过处理目标多个姿态角的平均距离像,在双谱变换的基础上,生成目标姿态角的双距离像;然后计算双距离像矩阵的特征值,得到一个融合特征矢量,以此为判决依据对空间目标进行分类识别;最后,通过大量实测数据验证,该方法对空间目标能作出正确判决,统计识别正确率高于常用的前向(BP)神经网络分类方法.