Relationships between urbanization and the oak resource of the Minneapolis/St. Paul Metropolitan area from 1991 to 1998

Urbanization was associated with loss and transformation of the oak forest in the Twin Cities (Minneapolis and St. Paul) metropolitan area (TCMA) over a recent 7-year interval. Between 1991 and 1998, urbanization increased based on several indicators: population density, area of developed land, and area of impervious surface—total impervious area and area within three classes of increasing degree of imperviousness (protected, affected, and degraded). We quantified relationships between changes in urbanization and changes in several parameters describing the oak forest at the scale of ecological subsection. Increased total and affected impervious area were strongly correlated with decreased area of oak forest when changes of the urbanization indicators and oak were expressed as percentages of the subsection area. Relationships were reversed when changes were expressed as percentages of the 1991 values. Increased population density was strongly correlated with increased loss in numbers and increased isolation of oak patches, but weakly correlated with loss of oak forest area. This is the first study to quantify relationships between changes in urbanization and changes in a specific forest cover type. Our results demonstrate complexities of urbanization impacts on a metropolitan forest resource, and highlight the importance of selected variables, spatial and temporal scales, and expressions of change when quantifying these relationships.     

Life cycle cost analysis of alternative vehicles and fuels in Thailand

High crude oil prices and pollution problems have drawn attention to alternative vehicle technologies and fuels for the transportation sector. The question is: What are the benefits/costs of these technologies for society? To answer this question in a quantitative way, a web-based model (http://vehiclesandfuels.memebot.com) has been developed to calculate the societal life cycle costs, the consumer life cycle costs and the tax for different vehicle technologies. By comparing these costs it is possible to draw conclusions about the social benefit and the related tax structure. The model should help to guide decisions toward optimality, which refers to maximum social benefit. The model was applied to the case of Thailand. The life cycle cost of 13 different alternative vehicle technologies in Thailand have been calculated and the tax structure analyzed.     

Identification of gaps in mangrove forests with airborne LIDAR

Mangrove forests change frequently due to disturbances from tropical storms, frost, lightning, and insects. It has been suggested that the death and regeneration of trees in small gaps due to lightning may play a critical role in mangrove forest turnover; however, the large-scale quantification of spatial pattern and areas of gaps is lacking for investigating this issue. Airborne light detection and ranging (LIDAR) technology provides an effective way for identifying gaps by remotely obtaining direct measurements of ground and canopy elevations. A method based on an alternative sequential filter and black top-hat mathematical morphological transformation was developed to extract gap features. Comparison of identified gap polygons with raw LIDAR measurements and field surveys shows that the proposed method successfully extracted gap features in mangrove forests in Everglades National Park. There are 400–500 lightning gaps per square kilometer in mangrove forests at the study sites. The distribution of gap sizes follows an exponential form and the area of gaps with sizes larger than 100 m² account for 55–61% of the total area of gaps. The area of gaps in the mangrove forest in Everglades National Park is about 4–5% of the total forest area and the average gap formation rate is about 0.3% of the total forest area per year, indicating that lightning gaps play an important role in mangrove forest dynamics.     

Ru-catalyzed anode materials for direct hydrocarbon SOFCs

A solid oxide fuel cell using a thin ceria-based electrolyte film with a Ru-catalyzed anode was directly operated on hydrocarbons, including methane, ethane, and propane, at 600 °C. The role of the Ru catalyst in the anode reaction was to promote the reforming reaction of the unreacted hydrocarbons by the produced steam and CO₂, which avoided interference from steam and CO₂ in the gas-phase diffusion of the fuels. The resulting peak power density reached 750 mW cm⁻² with dry methane, which was comparable to the peak power density of 769 mW cm⁻² with wet (2.9 vol.% H₂O) hydrogen. More important was the fact that the cell performance was maintained at a high level regardless of the change in the methane utilization from 12 to 46% but was significantly reduced by increasing the hydrogen utilization from 13 to 42%. While the anodic reaction of hydrogen was controlled by the slow gas diffusion, the anodic reaction of methane was not subject to the onset of such a gas-diffusion process.     

森林火灾的气象卫星监测方法

森林火灾是造成森林资源破坏的重大灾害之一。作者根据近年来从事森林火灾卫星监刚的实践，结合国内外有关利用气象卫星监测林火的资料，介绍了林火卫星监测的原理、方法和实用效果。     

-35~#轻柴油的生产

为满足市场发展的需求 ,胜利炼油厂用胜利混合原油为原料 ,根据用户要求成功开发生产了 -3 5 #轻柴油新产品。该产品完全符合国家标准GB2 5 2 -2 0 0 0中 -3 5 #轻柴油的各项质量指标要求 ,为胜利炼油厂赢得市场 ,增加了经济效益     

森林火情监测预报研究

对现行的森林火情监测方法进行了分析比较。根据实际存在的难题，提出了料为产用的实施方案及应采取的技术措施，进行了实地试验，取得较好的效果。     

An empirical InSAR-optical fusion approach to mapping vegetation canopy height

Exploiting synergies afforded by a host of recently available national-scale data sets derived from interferometric synthetic aperture radar (InSAR) and passive optical remote sensing, this paper describes the development of a novel empirical approach for the provision of regional- to continental-scale estimates of vegetation canopy height. Supported by data from the 2000 Shuttle Radar Topography Mission (SRTM), the National Elevation Dataset (NED), the LANDFIRE project, and the National Land Cover Database (NLCD) 2001, this paper describes a data fusion and modeling strategy for developing the first-ever high-resolution map of canopy height for the conterminous U.S. The approach was tested as part of a prototype study spanning some 62,000 km² in central Utah (NLCD mapping zone 16). A mapping strategy based on object-oriented image analysis and tree-based regression techniques is employed. Empirical model development is driven by a database of height metrics obtained from an extensive field plot network administered by the USDA Forest Service-Forest Inventory and Analysis (FIA) program. Based on data from 508 FIA field plots, an average absolute height error of 2.1 m (r = 0.88) was achieved for the prototype mapping zone.     

Using airborne laser scanning to monitor tree migration in the boreal-alpine transition zone

The boreal tree line is expected to advance upwards into the mountains and northwards into the tundra due to global warming. The major objective of this study was to find out if it is possible to use high-resolution airborne laser scanner data to detect very small trees — the pioneers that are pushing the tree line up into the mountains and out onto the tundra. The study was conducted in a sub-alpine/alpine environment in southeast Norway. A total of 342 small trees of Norway spruce, Scots pine, and downy birch with tree heights ranging from 0.11 to 5.20 m were precisely georeferenced and measured in field. Laser data were collected with a pulse density of 7.7 m^− 2. Three different terrain models were used to process the airborne laser point cloud in order to assess the effects of different pre-processing parameters on small tree detection. Greater than 91% of all trees > 1 m tall registered positive laser height values regardless of terrain model. For smaller trees (< 1 m), positive height values were found in 5-73% of the cases, depending on the terrain model considered. For this group of trees, the highest rate of trees with positive height values was found for spruce. The more smoothed the terrain model was, the larger the portion of the trees that had positive laser height values. The accuracy of tree height derived from the laser data indicated a systematic underestimation of true tree height by 0.40 to 1.01 m. The standard deviation for the differences between laser-derived and field-measured tree heights was 0.11-0.73 m. Commission errors, i.e., the detection of terrain objects — rocks, hummocks — as trees, increased significantly as terrain smoothing increased. Thus, if no classification of objects into classes like small trees and terrain objects is possible, many non-tree objects with a positive height value cannot be separated from those actually being trees. In a monitoring context, i.e., repeated measurements over time, we argue that most other objects like terrain structures, rocks, and hummocks will remain stable over time while the trees will change as they grow and new trees are established. Thus, this study indicates that, given a high laser pulse density and a certain density of newly established trees, it would be possible to detect a sufficient portion of newly established trees over a 10 years period to claim that tree migration is taking place.