Cu-template-dependent synthesis of PtCu nanotubes for oxygen reduction reactions

The development of electrocatalysts with high activity and durability for oxygen reduction reaction (ORR) in acidic electrolyte environments remains a serious challenge for clean and efficient energy conversion. Synergistic effects between Pt and inexpensive metals, the d band center of Pt and catalyst morphology could adjust the adsorption and desorption of oxygen intermediates by the Pt. All the factors affect the catalytic performance of Pt-based nanocrystals. Here, we prepared Cu@PtCu₃ NWs with an average diameter of 74.9 nm for Cu and about 10 nm PtCu₃ layer. After etching, the Cu@PtCu₃ nanowires is transformed into PtCu nanotube structure, due to the removal of copper from the surface and interior. PtCu NTs for ORR shows excellent activities and durability due to the integration of structural advantages and synergistic effects. Notably, the mass activity and specific activity of PtCu NTs (0.105 A mg^?1_Pt and 0.230 mA cm^?2_Pt) are 2.0 and 3.8 times higher than that of commercial Pt/C (0.053 A mg^?1_Pt and 0.06 mA cm^?2_Pt). The etching process to change the morphology of the catalyst and alter the electronic structure of the catalyst is expected to be useful for the design of future structured Pt-based alloy nanocatalysts.     

Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

突发疫情对染料行业影响及对策

一场新型冠状病毒肺炎疫情的爆发给染料行业的发展带来了影响,既有负面消极,也有积极影响。疫情将促进染料行业绿色发展,推动染料行业走向信息化、智能化时代,走向高质量发展,指出只要坚持绿色、创新和智能化,就能战胜疫情,推动中国染料行业稳健发展。     

A red code triggers an unintended approach motivation toward sweet ultra-processed foods: Possible implications for front-of-pack labels

Front-of-package labels (FOPL) are recommended to reduce consumer intake of ultra-processed food products (UPP). The multiple traffic-light label is one example of FOPL that indicates the content of target nutrients in products by displaying red (high), amber (medium), and/or green (low) color-coding. The red code may implicitly enhance sweetness perception and approach dispositions toward sweet UPP via cross-modal visual-taste interactions. We conducted two experiments to examine the possibility of contradictory influence of explicitly learned and implicit cross-modal associations on the emotional responses evoked by UPP pictures. In both experiments, we first explicitly associated the color codes with health-related meanings. In Experiment I (n = 78), a psychometric tool estimated the emotional responses (pleasantness and arousal ratings) evoked by UPP pictures when preceded by red, amber, or green color-codes. In Experiment II (n = 24), we recorded participants’ electrocortical brain activity to assess the early posterior negativity (EPN) component as an index of the emotional responses to UPP. The reported pleasantness (Experiment I) and the EPN amplitude (Experiment II) were greater for sweet UPP relative to salty UPP when primed with red codes but not when primed with green or amber. A red code increased positive emotions toward sweet UPP despite its explicit association with increased health-risks. Thus, the use of multiple traffic-lights might lead to an unintended implicit approach behavior toward sweet UPP. Designers, researchers, and policy makers may consider color-taste cross-modal associations when designing, testing, and applying FOPL.     

THE effect of Srandom DOPANT fluctuation on threshold voltage and drain current variation in junctionless nanotransistors

We investigate the effect of dopant random fluctuation on threshold voltage and drain current variation in a two-gate nanoscale transistor. We used a quantum-corrected technology computer aided design simulation to run the simulation (10000 randomizations). With this simulation, we could study the effects of varying the dimensions (length and width), and thicknesses of oxide and dopant factors of a transistor on the threshold voltage and drain current in subthreshold region (off) and overthreshold (on). It was found that in the subthreshold region the variability of the drain current and threshold voltage is relatively fixed while in the overthreshold region the variability of the threshold voltage and drain current decreases remarkably, despite the slight reduction of gate voltage diffusion (compared with that of the subthreshold). These results have been interpreted by using previously reported models for threshold current variability, load displacement, and simple analytical calculations. Scaling analysis shows that the variability of the characteristics of this semiconductor increases as the effects of the short channel increases. Therefore, with a slight increase of length and a reduction of width, oxide thickness, and dopant factor, we could correct the effect of the short channel.     

Trans fatty acids in commercial cookies and biscuits: An update of Portuguese market

Cookies and biscuits are a recognized source of trans fatty acids (TFA). Aware of its consumption worldwide, an update on TFA content was taken in 2012, in a total of 50 samples commercialized in Portugal. Despite the absence of specific Portuguese legislation, TFA amounts in cookies and biscuits are generally low, with TFA amounts lower than 0.1 g per 100 g, and an average of 0.6% in the extracted fat in 49 of the 50 samples analyzed. Unfortunately, one sample presented 27% of TFA in the lipids, highlighting that the problem is still present. Also, a high prevalence of saturated fatty acids was observed, as high as 92.4% in the fat (53.0% on average). This fact is also a major health concern, particularly when the reformulation of these products in the last years (2006–2012) was effective regarding TFA reduction but seemed to have occurred at expenses of increasing SFA, thus reducing the potential beneficial effect achievable by replacing with cis-unsaturated fats, as generally recommended.     

In-situ TEM observation of structural changes in nano-crystalline CoCrCuFeNi multicomponent high-entropy alloy (HEA) under fast electron irradiation by high voltage electron microscopy (HVEM)

The structural changes induced in a CoCrCuFeNi multicomponent nano-crystalline high-entropy alloy (HEA) under fast electron irradiation were investigated by in-situ transmission electron microscopy (TEM) using a high voltage electron microscope (HVEM). A fine-grained face centered cubic (fcc) single phase was obtained in the sputtered specimens. The fcc solid solution showed high phase stability against irradiation over a wide temperature range from 298 to 773 K, and remained as the main constituent phase even when the samples were irradiated up to 40 displacement per atom (dpa). Moreover, the irradiation did not seem to induce grain coarsening. This is the first report on the irradiation damage in 5-component HEA under MeV electron irradiation.     

Micro- and macroergonomic changes in mental workload and medication safety following the implementation of new health IT

Health information technology (IT) is a promising way to achieve safer medication management in the delivery of healthcare. However, human factors/ergonomics dictates that in order to make the complex, cognitive work of healthcare delivery safer, health IT must properly support human cognition. This means, for example, that new health IT must reduce, not increase, workload during safety-critical tasks. The present study was the first to quantitatively assess the short- and long-term impact of bar coded medication administration (BCMA) IT on nurses' mental workload as well as on perceived medication safety. One-hundred seventy registered nurses across 3 dissimilar clinical units at an academic, freestanding pediatric hospital in the Midwest US participated in surveys administered before, 3 months after, and 12 months after the hospital implemented BCMA. Nurses rated their external mental workload (interruptions, divided attention, being rushed) and internal mental workload (concentration, mental effort) during medication administration tasks as well as the likelihood of each of three medication safety events: medication administration errors, medication errors on the clinical unit, and clinical unit-level adverse drug events. Clinical unit differences were assessed. Findings generally confirmed the hypothesis that external but not internal mental workload was associated with the perceived likelihood of a medication safety event. Comparisons of mental workload from pre- to post-BCMA revealed statistically significant changes in the critical care unit only. Medication safety appeared to improve over the long term in the hematology/oncology unit only. In the critical care and medical/surgical units, medication safety exhibited short-term improvements that were eliminated over time. Changes in mental workload and medication safety, two classically microergonomic constructs, were deeply embedded in macroergonomic phenomena. These included the fit between the BCMA system and the nature of nursing work, the process of BCMA implementation, and BCMA interactions with concurrent changes occurring in the hospital. Findings raise questions about achieving sustainable performance improvement with health IT as well as the balance between micro- and macroergonomic approaches to studying technology change.Relevance to industryDesigners must consider how technology changes cognitive work, including mental workload. Hospitals and other implementers of technology must ensure that new technology fits its users, their tasks, and the context of use, which may entail tailoring implementation, for example, to specific clinical units. Evaluators must look over time to assess both changes in cognitive work and implementation issues. Healthcare practitioners must also recognize that new technology means a complex transformation to an already complex sociotechnical system, which calls for a macroergonomic approach to design and analysis.