Litter fall, litter stocks and decomposition rates in rainforest and agroforestry sites in central Amazonia

The sustainability of agroforestry systems in Amazonia was assessed from their litter dynamics and decomposition. Litter fall and litter stocks were determined from July 1997 to March 1999 in four sites in central Amazonia: a primary rainforest, a 13-year-old secondary forest, and two sites of a polyculture forestry system which consisted of four planted tree species of commercial use amidst upcoming secondary growth. The average annual litter fall in the undisturbed primary rainforest (FLO) was 8.4 t ha^–1 year^–1, which is within the range of litter fall in other rainforests in the region. It was similar in one of the two polyculture sites (8.3 t ha^–1 year^–1), but lower in the secondary forest and in the second polyculture site. In the litter fall in secondary forest and agroforestry sites, the leaf portion was higher (76–82% of total litter fall) than in FLO, due to reduced fine matter and wood fall. Leaf litter fall variability was much lower in the plantation sites than in the forests, which is explained by the much more homogeneous stand structure of the plantations. The quality of the produced litter, measured as C/N ratio, differed significantly between the primary forest site and one polyculture and the secondary forest site. The cumulative input of nitrogen through litter fall was 144 kg ha^–1 year^–1 in FLO, and 91–112 kg ha^–1 year^–1 in the polycultures and the secondary forest. Litter fall was not correlated with soil parameters, but had a significant linear regression with canopy closure. For the primary rainforest, litter fall was also (inversely) correlated with monthly rainfall. Litter fall was higher in the first year (1997–1998; an El Niño period) than in 1998–1999. Litter stocks on the forest floor were highest in the secondary forest (24.7 t ha^–1), and much lower in the polyculture sites (15.1–16.2 t ha^–1) and the primary forest (12.0 t ha^–1). There were no differences in the relative N content (C/N ratio) of the litter stocks between the sites, but the larger stocks led to higher absolute N contents in the litter layer in the secondary forest. From the monthly values of litter stocks (S) and litter fall (P), the decomposition coefficient k _e=P/S was calculated, which was, on average, highest for the primary forest (0.059), followed by the polyculture systems (0.040–0.042), and by the secondary forest (0.024). Thus, due to low decomposition rates, the secondary forest site showed large litter accumulations in spite of a relatively low litter fall. In contrast, the primary forest showed high litter fall but low stocks, due to high decomposition rates. The decomposition coefficients of the polyculture systems ranged between the primary and the secondary forest. The reduced decomposition rates in the man-managed agroecosystems indicate quantitative and/or qualitative changes in the decomposer communities of these systems that lead to a higher build-up of litter stocks on the forest floor. However, the decomposer systems in the polyculture sites still were more functional than in the site of non-managed secondary growth. Thus, from a soil biological viewpoint, ecologically sustainable low-input agroforestry in Amazonia will benefit from the application of these polyculture systems.     

Evaluating the comfort of use of protective footwear: Validation of a method based on microclimate parameters and peripheral blood flow

The paper presents validation evidence for a method of evaluating the comfort of use of protective footwear based on microclimate parameters and peripheral blood flow in the lower limbs. A study involving impedance plethysmography showed that the inherent construction characteristics of protective footwear hinder heat diffusion and moisture removal, influencing peripheral blood flow in the lower limbs. The temperature and relative humidity inside the footwear, the weight of secreted sweat, and the weight of the support textiles (socks and liners) were measured and compared to the plethysmographic parameters. The components of measurement uncertainty were carefully determined for each studied parameter and uncertainty budgets were created. These results were subsequently used to identify measurement errors that could affect the quality and reliability of laboratory tests.     

Measuring the human body's microclimate using a thermal manikin

The human body is surrounded by a microclimate, which results from its convective release of heat. In this study, the air temperature and flow velocity of this microclimate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the microclimate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the microclimate shape strongly depends not only on the body segment, but also on boundary conditions: The higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the airflow in the microclimate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient.     

Case study of the impact of toecap type on the microclimate in protective footwear

Protective footwear plays a critical role in work effectiveness and personal safety. It exhibits special properties due to the use of protective elements and materials, but these components may deteriorate its hygienic characteristics. This paper presents a study on the influence of toecap type on the microclimate in protective footwear (ankle boots). Toecaps made of metal and of a composite polymer material were evaluated. Changes in the footwear microclimate were monitored using a thermal foot model at a perspiration rate of about 5 g/h with and without the simulated movement function. The influence of the toecap material on the microclimate in the footwear was analyzed statistically. Under conditions of simulated movement, higher temperature and relative humidity values (about 32 °C and 90%) were recorded in the toe region of ankle boots with metal toecaps as compared to composite polymer toecaps (about 29 °C and 53%, respectively). These results suggest that protective footwear with composite toecaps ensures better ventilation of the foot during work.     

面向气象学向度的新型小气候设计模式——浅谈菲利浦·拉姆的“气象适应性”建筑及环境设计

全球气候变暖一直作为时代新命题而被设计行业着重关注,菲利浦·拉姆作为一名专注于探索建筑设计的先驱者,提出了一种以气象学为导向的新型环境设计模式。本文通过介绍拉姆在"气象适应性"设计方面的探索和实践,从温度、湿度、光照三大策略方向解释了气象适应性设计中"适应气象"和"构建气候"两大概念,并结合其中国台湾地区清翠园实例,着重阐述了气象适应性设计理念在建筑及城市环境设计领域中的应用,以此作为我国未来城市局部环境小气候设计发展趋势的参考。     

Green leaf phenology at Landsat resolution: Scaling from the field to the satellite

Despite the large number of in situ, plot-level phenological measurements and satellite-derived phenological studies, there has been little success to date in merging these records temporally or spatially. In this research, we bridge this scale gap through higher resolution satellite records (Landsat) and quantify the accuracy of satellite-derived metrics with direct field measurements. We compiled fifty-seven Landsat scenes from southern New England (P12 R51) from 1984 to 2002. Green vegetation areal abundance for each scene was derived from spectral mixture analysis and a single set of endmembers. The leaf area signal was fit with a logistic-growth simulating sigmoid curve to derive phenological markers (half-maximum leaf-onset and offset). Spring leaf-onset dates in homogenous stands of deciduous forests displayed significant and persistent local variability. The local variability was validated with multiple springtime ground observations (r² = 0.91). The highest degree of verified small-scale variation occurred where contiguous forests displayed leaf-onset gradients of 10-14 days over short distances (< 500 m). These dramatic gradients occur in of low-relief (< 40 m) upland regions. The patterns suggest that microclimates resulting from springtime cold-air drainage may be influential in governing the start of leaf growth; every 4.16 m loss in elevation delayed spring leaf onset by 1 day. These microclimates may be of crucial importance in interpreting in situ records and interpolating phenology from satellite data. Regional patterns from the Landsat analyses suggest topographic, coastal, and land-use controls on phenology. Our results indicate that deciduous forests in the Providence, RI metropolitan area leaf out 5-7 days earlier than comparable rural areas. The platform-independent curve-fit methodology may be extended across platforms and field data. The methodologically consistent approach, in tandem with Landsat data, allows an effective scaling from plot to satellite phenological observations.     

Coupled simulation of heat and moisture transport in air and porous materials for the assessment of moisture related damage

This paper describes the coupling of a model for heat and moisture transport in porous materials to a commercial Computational Fluid Dynamics (CFD) package. The combination of CFD and the material model makes it possible to assess the risk of moisture related damage in valuable objects for cases with large temperature or humidity gradients in the air. To couple both models the choice was made to integrate the porous material model into the CFD package. This requires the heat and moisture transport equations in the air and the porous material to be written down in function of the same transported variables. Validation with benchmark experiments proved the good functionality of the coupled model. A simulation study of a microclimate vitrine for paintings shows that phenomena observed in these vitrines are well predicted by the model and that data generated by the model provides additional insights in the physical mechanisms behind these phenomena.     

Effect of building integrated photovoltaics on microclimate of urban canopy layer

Building integrated photovoltaics (BIPV) has potential of becoming the mainstream of renewable energy in the urban environment. BIPV has significant influence on the thermal performance of building envelope and changes radiation energy balance by adding or replacing conventional building elements in urban areas. PTEBU model was developed to evaluate the effect of photovoltaic (PV) system on the microclimate of urban canopy layer. PTEBU model consists of four sub-models: PV thermal model, PV electrical performance model, building energy consumption model, and urban canyon energy budget model. PTEBU model is forced with temperature, wind speed, and solar radiation above the roof level and incorporates detailed data of PV system and urban canyon in Tianjin, China. The simulation results show that PV roof and PV façade with ventilated air gap significantly change the building surface temperature and sensible heat flux density, but the air temperature of urban canyon with PV module varies little compared with the urban canyon of no PV. The PV module also changes the magnitude and pattern of diurnal variation of the storage heat flux and the net radiation for the urban canyon with PV increase slightly. The increase in the PV conversion efficiency not only improves the PV power output, but also reduces the urban canyon air temperature.     

Spatial microclimate patterns in reconstructed and new large uninsulated loose housing cowsheds

Keeping heifers and dairy cows in uninsulated loose housing cowsheds is spreading in the cold regions of the world. During the last decade, cold cowsheds have spread into all the Scandinavian and Baltic countries. In 2002, two large cowsheds were studied: a cowshed renovated from an old collective farm cowshed to a cold building (RUC) and a newly finished one-nave steel-framed loose housing cowshed (UC). The measurements of air temperature, relative humidity, air velocity and lighting were taken indoors and outdoors.