Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 2: Chloride redistribution in concrete after application of a system sealing surface protective coating

This DFG-funded research project aimed to gain a better understanding of the mechanisms of the W-Cl repair principle within the framework of fundamental investigations, to contribute to the creation of the necessary basis for a broader application of the repair principle in practice. The focus was on the development of a model to describe the chloride redistribution after the application of a system sealing surface protective coating. On the basis of Fick's second law of diffusion, a mathematical model with a self-contained analytical solution was developed, with the help of which the chloride redistribution after application of a system sealing surface protective coating can be calculated under the idealized assumption of complete water saturation of the concrete. Furthermore, the influence of the dehydration of the concrete, expected as a result of the application of the repair principle W-Cl, on the chloride redistribution was investigated. On the basis of laboratory tests and numerical simulations, material-specific reduction functions were developed to quantify the relationship between the chloride diffusion coefficient and the ambient humidity.     

ANALYSIS OF THE SCATTERING OF RIVET ON AIRCRAFT

This letter investigates the scattering characteristic of the rivets on aircraft.The electric Field Integral Equation (EFIE)is used with the moment to calculate the current distribution on the surface of the rivet.With the application of Gaussian integral corresponding triangular cell,the time to fill the Z matrix is greatly reduced.Finally,the RCS of a type of rivet on aircraft is analyzed.     

3D Motion Estimation and Motion Fusion by Affine Region Matching

In this paper,a new method is presented for 3D motion estimation by image region correspondences using stereo cameras.Under the weak perspectivity assumption.we first employ the moment tensor theory (Cyganski and Orr^[11]) to compute the monocular affine transformations relating images taken by the same camera at different time instants and the binocular affine transformations relating images taken by different cameras at the same time instant.We then show that 3D motion can be recovered from these 2D transformations.A space-time fusion strategy is proposed to aim at robust results.No knowledge of point correspondences if requred in the above processes and the computations involved are linear.To find corresponding image regions,new affine invariants,which show stronger invariance,are derived in term of tensor contraction theory.Experiments on real motion images are conducted to verify the proposed method.     

基于矩的异分辨率图象边界检测

（１）本文引入仿射变换，提出了一种用矩算子以民分辨率图象直接进行边界检测的方法，利用同分辨率图象正方形窗口的模板行矩的计算，推导出了相应用的边界参数公式。（２）本文提出一种隐线笥插值矩计算方法，得到一组与正方形窗口对应的正方形模板，避免了费时的预插值过程，（３）对本文提出的方法进行了实验验证，并给出了实验结果。     

A physically based method for triangulated surface flattening

This paper introduces a new method of generating 2D flat patterns from a 3D triangulated surface by opening the bending configuration of each winged triangle pair. The flattening can be divided into four steps. First, a 3D triangulated surface is modeled with a mass-spring system that simulates the surface deformation during the flattening. Second, an unwrapping force field is built to drive the mass-spring system to a developable configuration through the numerical integration. Third, a velocity redistribution procedure is initiated to average velocity variances among the particles. Finally, the mass-spring system is forced to collide with a plane, and the final 2D pattern is generated after all the winged triangle pairs are spread onto the colliding plane. To retain the size and area of the original 3D surface, a strain control mechanism is introduced to keep the springs from over-elongation or over-shrinkage at each time step.     

AlCl3/活性炭催化甲基三氯硅烷与低沸物再分配反应研究

甲基三氯硅烷(M1)与低沸物(LBR)是工业上"直接法"生产二甲基二氯硅烷单体过程中产生的副产物,两者之间通过再分配反应可转化为高价值的有机硅单体.以活性炭为载体,采用浸渍蒸发煅烧法制备了负载型AlCl3固体酸催化剂,在固定床反应器中进行甲基三氯硅烷与低沸物的再分配反应,制得二甲基二氯硅烷和三甲基氯硅烷.考察了活性炭载体预处理方式及反应条件对再分配反应的影响.结果表明,经过高温扩孔处理的活性炭载体负载的AlCl3催化剂具有较好的反应活性;优化的反应条件为:W(M1/LBR)为2.0～3.0,反应温度为310℃,LHSV为1.5 h-1;该催化剂的制备过程简单,催化反应条件温和且表现出良好的催化稳定性.     

周转箱管理（CMC）项目在上海通用汽车的实施

研究周转箱管理方式在零部件入厂物流方面的应用,分析实施周转箱管理项目的原因和可能性,提出了总体设计规划思路和具体实施、推广方法,提供了具体的流程、步骤、框图和实例,并就项目的持续优化进行了分析。实现了通过科学地强化对入厂物流的控制和管理,既控制了零部件的物流运行风险,又降低约20％的周转箱投入成本。     

基于ZMP的双足机器人稳定性分析

引入双足机器人研究中一个重要物理量——零力矩点ZMP（zero Moment Point）,研究其计算和测量方法,利用其分析双足机器人在单腿和双腿支撑时的作用范围,最后在二维和三维平面内对机器人的ZMP计算进行探讨,为稳定步态的设计做了理论铺垫。     

住房分配与保障：一个民生议题

计划经济时代的城市住房分配采取反市场的再分配模式,单位间与单位内的等级秩序是住房分配的表征。转型经济时期的住房分配则采取以市场为导向的分配模式,住房市场是一种混合市场,由官僚结构、单位因素、家庭结构及早期房改制度等共同左右。在这种情况下,市场与再分配存在相互强化,结果导致“强市场强制度”的过度保障、“超强制度”的错位保障及“弱制度弱市场”的缺位保障,这些问题应是未来制定住房政策的关注焦点。